Jump to content
SAU Community

Recommended Posts

^^^axles the same?, or same as pissy autos, not 260rs and rs4s ?

Ill been interested to see this actually driving, i know what mine hits and doesn't, and thats 18x9.5 +20 with 235's.

it still touches the coilover on big bumps on a full tank

Still not sure how it won't smash the coilovers once you hit the first little bump

Looks tuff though!, hope it all works out!

cheers

darrem

Edited by jet_r31

Sub frame are the same yes but what jet r31 is commenting on is the axles, s1 auto and s2 auto stages have relatively week axles given the weight of the car so if you start making decent power through them with hard launches and shifts they will snap. an auto will cushion them a bit but they will go as will s14 axles ect . So if you where to do this conversion for a serious mod not just the fact of fitting big wheels under it would pay to use a rs260 or rs4s rear sub and diff axle set up and gain much stronger/thicker 6bolt 33gtr axles that run in those cars , and as RS2000 is all ready running in the high 200kw range sure he will need it one day ,

And as jetr31 and mike have said I can not possibly see how 10.5 inch rims with that offset are not fowling rear coils , and make sure ya spring rate is not hard, when I had my 20s on the ride was bone breaking

went to local tyre power today to do a proper test fit, i need 25mm spacers on front. i have ordered 30mm to be sure, once they arrive i will get 4 new tyres fit and then we can see what dramas i run into then lol......................

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...