Jump to content
SAU Community

Recommended Posts

Spine issue can give that pain for sure.

Hows the rotation and extension of the thorasic spine (upper back)? Do you have mobillity of twisting , extending etc without pain? If thats ok , then I would guess this pain is in motions where the scapular retraction or opening up of the shoulder blades causes a twinge.

Get a tennis ball against the wall and roll it over that sore spot to see if there is muscle tightness.

The shoulder girdle gets pretty beaten up by the worout shedule you have and there is no balancing movements to increase the strength the shoulder girdle . To match the increases in presseing movements. This might not be the issue right now but, consider adding something.

If your scapular retraction is being effected by this pain / weakened, then no more pressing movements for you, till it's better. You can't stabilise the shoulders well, so pressing will start causing issues elsewhere (rotator cuff)

You should be fine to recover pretty quick.

When I went to the physio I had difficulty rotating to my left side (injured side), and I still do now. I don't know what extension of the thorasic spine is so I can't comment on that.

I rolled a tennis ball over the sore spot just then but it did not cause me any pain.

Hopefully Birds can look at adding balancing movements to the workout as he has written the program I'm currently doing.

Like I said, I did my workout last night with no pain except for tricep pushdown.

I can try another physio I guess. I just want to know what muscle is injured!

Use the tennis ball as Rev said, try it on your rhomboid, roll onto it on your side for you lats, laying bodyweight on the ball.

Or, press on your chest from your collar bone ( or use the ball ), working downwards, about an inch from the sternum to see if there is any pain, explore that area. If you find the spot the pain may shoot down that tricep.

Edited by jangles

Be a strain around the thorasic spine as physio said given rotation showed up the issue. Tennis ball just to the side of the spine on the wall. See if you can find a tender spot.

Push down would cause the twinge due to the stabilisation needed and difference between each arm. One side is usually stronger so more stabilisation is needed to one side to compensate perhaps placing a twisting pressure very slightly.

I think you will be fine in no time

14/08/13

Deadlifts

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

Standing Shoulder Press

15kg x 10

15kg x 10

15kg x 10

20kg x 10

20kg x 10

20kg x 10

Seated Row

25kg x 10

25kg x 10

30kg x 10

35kg x 10

40kg x 10

45kg x 10

50kg x 4

Decline Bench

30kg x 10

30kg x 10

35kg x 10

35kg x 10

40kg x 10

45kg x 6

Wide Grip Lat Pulldown

35kg x 10

35kg x 10

45kg x 10

45kg x 10

55kg x 6

55kg x 5

Bicep Curls

10kg x 10

15kg x 10

15kg x 10

20kg x 4

20kg x 4

20kg x 4

20kg x 4

Starting to get into the depression side of things, I can't even do cardio and knowing that I can't do aerobics tonight is killing me.

Looking at getting injection therapy; it's $140 but I just want to get better :(

For your shoulder?

The hardest part of recovery is often the mental aspect, especially for active people, but I've come to peace with it because I know I always come back, usually better than before.

Chin up, you will get it sorted eventually.

It's not my shoulder; to me it's my lat/trapezuis muscle.. maybe a tear?

Swapping to a friends auto tomorrow because driving my car is too painful when I change to second and fourth gear.

Physio says its facet joint/thorasic spine injury, it's nearly a month now, so maybe it is joint which is why I'm looking into injections, probably steroid.

Ahh that's right, well I wouldn't imagine it'd be a quick fix.

Unfortunately these things happen and it takes time to heal, do whatever you can to help it.

Especially frustrating when you don't know exactly what the problem is.

You can still do cardio though? Jog, walk, exercise bike?

Your call, I don't much anything about that so not sure what it will do besides block the pain I assume?

Or is it supposed to fix the problem or at least prove what it is?

Injections are mainly effective as an anti inflammatory but can be used to help make a diagnosis

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...