Jump to content
SAU Community

Recommended Posts

So I was on Parramatta Rd today looking at some GTR's when I noticed a beautiful white Series 8 RX7 sitting in the lot. I sat in it and was instantly reminded of the MX5, with it's cockpit-like interior and snappy gearbox.

I've always been fond of the RX7, however I am hesitant to buy anything with a rotary due to hearing bad things and having no experience with them. However, all I would ever want is to buy one completely stock and not even touch it, so really, how unreliable could it be?

Keen to hear your thoughts and experiences on the VIII RX7 and just rotaries in general.

Link to comment
https://www.sau.com.au/forums/topic/429501-i-kind-of-want-to-buy-an-rx7/
Share on other sites

I did a bit of research on these before and it seems like if you keep the series 8 near to stock then they are a great car. If you go for an early series FD then there are a few things that need to be modified to make even stock ones reliable. Although by now, after 20 years of use, I imagine even the early ones would be sorted out.

At the end of the day if you do blow a motor you can get a kit from the US to stick an LS1 in there and they only weigh a little bit more than the rotary.

Just make sure you put NO2 bottles in a secret compartment under the seat so that for 10 seconds or less you can be free :P

  • Like 1

I know a guy thats been racing stock series 7 or 8 rx7's for years at targa and club days and never had any reliability issues. All comes down to how well they have been maintained and luck.

How much would it cost to rebuild a rotary anyway?

I had a series 8 for a few years and never had any major issues with it at all. The engine remained stock but it did get driven pretty hard. It did the 600km run from Perth to Kalgoorlie at least half a dozen times without it missing a beat.

That being said, they are the kind of car that loves to be driven hard, so finding an unmolested one will not be that easy. Whatever you do, do not believe the odo on these cars, a massive amount get wound back.

Someone called?

Rotaries are awesome and don't let anyone tell you otherwise - I have 2!

If the engines are looked after, built well (if modified), treated properly, warmed up etc. they are definitely reliable.

I have an FD 5-speed in one of my rotangs running ~375rwkw on pump fuel and it holds up and shifts well, doubt it could take much more but I don't think you'll be pushing that with your normal 13BT.

Someone called?

Rotaries are awesome and don't let anyone tell you otherwise - I have 2!

If the engines are looked after, built well (if modified), treated properly, warmed up etc. they are definitely reliable.

I have an FD 5-speed in one of my rotangs running ~375rwkw on pump fuel and it holds up and shifts well, doubt it could take much more but I don't think you'll be pushing that with your normal 13BT.

you have two? is that so whilst one is being repaired you can drive the other? (jokes)

Someone called?

Rotaries are awesome and don't let anyone tell you otherwise - I have 2!

If the engines are looked after, built well (if modified), treated properly, warmed up etc. they are definitely reliable.

I have an FD 5-speed in one of my rotangs running ~375rwkw on pump fuel and it holds up and shifts well, doubt it could take much more but I don't think you'll be pushing that with your normal 13BT.

But that's your only "running" rotary innit?

It is but that's only because I bought my FC without an engine in it ;)

you have two? is that so whilst one is being repaired you can drive the other? (jokes)

:P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...