Jump to content
SAU Community

Recommended Posts

^^^

-1

 

I ran a stock internal to 450rwhp for years.  Tracked it, hillclimbed it, drove it on the road. It was fine.  Then I had it rebuilt and it all turned to custard.

 

If you can live with it off the road for 6 months then just use it up with the stock internals.

20 years of unknown history running at 10psi, boost it to 22psi....you better be ready.....it's a gamble doesn't matter which way you look at it. As long as the OP is aware that you are increasing the risk of something going wrong. And it is far cheaper than what you are suggesting and having an engine fail and paying for labour and turbos again.

  • 4 months later...

Couple of quick pictures

IMG_20131206_125718_zpseatj91ja.jpg

IMG_20131204_215010_zpsv7xmlyds.jpg

Plasti-dipped front bumper.

IMG_20131203_134251_zps3v65b5ig.jpg

List of stuff had done by Josh last time:

Bcbr coilovers fitted

Work Meister s1r 28x10 +12 fitted

Archilles 123s 265x35x18

Blitz front pipes

Front and rear camber arms

Rear castor arms

Replaced busted CV

Serviced all the usual suspects

Twin plate coppermix fitted

High flow panel filter

The difference in response the clutch and flywheel is insane feels like a more powerful different car even with no power mods as yet.

Next up is:

Front r34 brembos

Rear castor arms

Braided lines

New pads

Rear sway bar

Front and rear strut braces

With the handling all taken care of I'll start building towards my power figure.

Would like to take this opportunity to thank and recommend josh and the team at galvsport I couldn't be happier.

  • 5 months later...

Next up is:

Front r34 brembos

Look at the Alpha Omega EVO brembo brake upgrade with 350mm discs, the bolts for the 34 brembos are 14mm against 12mm for the 32 ones so they don't just bolt on

^^ This!

If you want Brembo's, get a set of R32 GTR V-Spec / V-Spec II or R33 GTR calipers as they will be a straight fit and bolt on.

You will have to custom make, the R34 GTR Brembo's fit.

The GTR Brembo's are good for street and light / occasional track work but if you want to seriously track your car, look into a set of aftermarket race caliper setup.

Copy Paste from another forum.

Right here is the full list of work done this round anyway,

Engine :

Garrett 9-s
Mines Ceramic Coated Dump Pipes
Vipec V88 ecu
Blitz radiator
HKS cam gears
Tomei Type B 260/260 9.15 pon cams
DW1200 injectors
Splitfire Coilpacks
Walbro 465 E85 pump
Rips Sump Kit
Oil pump Billet gears sourced locally
ATI 1000hp harmonic balancer
Major service


Misc:
Project MU pads up front
Valley and Cam covers painted wrinkle black
Plenum soda blasted
New R34 valley emblem
Cusco brake cylinder brace
Removed clutch vacuum assist lines
Lifted car 20-30mm
New heater hoses/gaskets bolts and various other parts you would expect
Run new wiring relay to pump as stock had a current drop


Thats all the major stuff, the budget was added to significantly as decided to take the advice of josh and many of you guys here in regards to tackling the oiling issues early, sump, pump gears and harmonic balancer were extras that required engine out, it worked out fine in the end since reduced a little labour in other areas and gave me the chance to soda blast the horrible flaky intake plenum paint and paint the valley/cam covers.

Only spoke briefly to the tuner (Sean at ASG) but was as you would expect, made 470hp and turbos ran out of breath in top end which suits me fine when the original build brief was formed. Aimed for response and midrange, from the look of the graph and the very short spin I took in it today its within those parameters.

Still cruises around in traffic perfectly happily off boost and clutch feel is only slightly heavier so still very easy to daily drive. I am in love with the new idle/exhaust note though, good amount of volume without being ridiculous.

Will post the Dyno results when I get them and after have a debrief with Josh as to how it all went as he was busy today when I took it for a quick test.

Plans for future are for one to enjoy it and get it onto some track days to stretch its legs and learn to drive it but the main priority is to get the exterior to immaculate, so ill find some nismo rear pods, fix a few tiny dents and do a few small things.

Still smiling ear to ear haha

  • Like 1
  • 2 weeks later...

1EFJ316%203_zpshifb60c7.jpg

Here's the dyno.

Full boost a little later than had hoped but tuner did say could move curve a bit so somewhere down the line may look at trying to get 18psi by 4k.

Stoked with power figure though.

Edited by Ambi3nce
  • 5 months later...

Quick update, went in for retune to swing cams to bring boost on earlier.

Dialed in 20psi over previous 18psi. Gained 2HP, 30+nm torque and boost is on almost 700rpm earlier. Very happy with how it is now, I would not have though that 500-700rpm in boost earlier would make such a difference, but it feels night and day.

Also got launch control set up for vipec so I can not fail miserably at the drags when I eventually get down,

IMG_20141128_201521_zpsk4ib5kz_edit_1417

Nice and strong. Must be nice to drive on the street and should be a blast on the track. Good stuff mate.

Yeah the retune made a huge difference, I did not think 700rpm would feel so different but it so much better on the street, havn't had a chance to track it yet. Blew a cooler pipe today for first time so may have to start swapping out some old pipes for newer ones/clamps.

Neat and tidy build congrats and enjoy.

Thanks man, that is the plan. Next break from work will get some small tidy up jobs done, tints to try protect the interior from the ridiculous heat here and getting some small dents removed.

700 rpm is night and day. 200 rpm is heaps!!!

Area under the curve just makes the car so much nicer to drive!

Nice build thread mate. Car looks clean, the wheels suit perfect! Awesome power delviery too.

What's the next plans for the car?

Thanks man,

Next is a few small things, tint, few small dents removed, basically get it as good as I can short of a respray.

Need to buy and install a defi 3 gauge cluster as I want oil/coolant temp and boost pressure which exceeds stock gauge.

Also will be replacing the Gsensor with a digital unit as mine is starting to read a bit off and is throwing the torque to the front at strange times.

700 rpm is night and day. 200 rpm is heaps!!!

Area under the curve just makes the car so much nicer to drive!

Yeah Its so much more fun to drive now, feels alot quicker too

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...