Jump to content
SAU Community

Recommended Posts

pt in a high flow cat and a bigger front/dump pipe so now my exhaust is complete..... also put in the new 02 sensor so see if that makes a difference economy wise.... at the moment i get between 250-350 a tank depending how i drive it.... will update if any fuel improvement is made.....

ok results may take longer than expected,,,,, since i changed the 02 and the dump/front pipes at the same time i am driving the car alittle harder due to the fact that the sound of the exhaust is better and i love hearing it and the performance is noticable improved...... it may take a few weeks to settle down and start driving the car as a granny again to compare the fuel consumption issues with the new 02 sensor....... however today i drove from castle hill - manly today via monavale road and back which is a good 80-100km round trip with detour and the petrol droped about 1/8th of a tank, yes this was mainly highway or main road driving but i did gun it a few times so i do belive in the early days that there is some kind of fuel economy improvvement but i will only truely know when i put a whole new tank into it on wednesday and drive it to my usual regime...

to be continued

As there isn't a direct replacement units available for R34 aftermarket, I do suggest going with a genuine Nissan item. These retail for ~$230 however we offer them to SAU members for $194.70 + postage. For the R32/33 there is a direct replacement NTK item available, we offer them for $77 + postage.

Both of these units, and other applications, can be found here.

As there isn't a direct replacement units available for R34 aftermarket, I do suggest going with a genuine Nissan item. These retail for ~$230 however we offer them to SAU members for $176.00 + postage. For the R32/33 there is a direct replacement NTK item available, we offer them for $77 + postage.

Both of these units, and other applications, can be found here.

PM sent regarding to NTK part number for NTK oxygen sensor to suit an R32 GTS-t

Cheers

well had good results with the el falcon 02 sensor,,,, did 100KM and used 1/8 of the tank guide.... usually i would have already used 1/4 and in reality i have driven the car alittle harder than usual..... after these results i have broken a bolt so the exhaust is leaking pretty bad and i did 25km and am now nearing the 3/4 mark..... so with the early results the el falcon 02 sensor seems to be working..... but i have learnt that a badly leaking exhaust seems to be giving me alittle less power and using more fuel.... atleast the 02 sensor is working lol

After reading through these 16 pages, im still confused. lol

All I've gathered is that changing the o2 sensor has improved the fuel economy of most vehicles.

Could someone be nice and just help me answer 2 questions?

1. Which o2 sensor do i get for the r34GTT? (I dont mind paying a bit more for a 'better' one, i dont want to cut wires or whatever, coz im unco ass)[also like whats the difference between NTK/NISSAN/the faclon ones, generic etc??]

2. and where do i get one in Sydney? (is there a member here who does this kinda stuff in sydney or even the hills area?)

apologies in advanced for my nubness. feel free to PM as to clog up this thread. =)

thanks

Edited by JI34GT

they just measure oxygen in exhaust and either send out a 1 volt electrical inpulse or no impulse (sometimes very low impulse) to the ecu, then the ecu determines if the car can run lean or rich, basically how much petrol and oil to combine at any one time... i used an el falcon 02 sensor, $70.99 from repco in dural just behind bunnings, didnt have to wait around for some idiot to send out a replacement for $77 + postage and handleing..... i got it the day i wanted it.

basically if it screws into your dump pipe and has 3 wires it will work in the r34gtt

to connect the wires is easy, the odd coloured wires from the 02 sensor and the wireing harness connect, then the other 2 wires on the sensor connect to any of the other 2 wires om the loom from the car....

if you want help i can show you, im at castle hill

i installed a new dump/front pipe and high flow cat, since i changed the dump i thought id do the 02 sensor at the same time, didnt wanna spend on a nissan 02 sensor so i went with falcon... so far my tank is showing 1/2 on the dial and ive done 240km (carrying 4 people from city - menai in peak hour traffic.... and wityh the extra power my car has ive been driving it a little harder than usual), before the 02 sensor i would get 300-350 maximum out of a tank (till the dial hits the bottom end of empty), driving like a granny and never carrying more than 1 passenger.... i am expecting to easily get to 400km before i hit the empty line, hopefully more....

i can wire it for you if you bring it to me or if your not too far and if you undo the old 02 sensor first, they are a bastard to unbolt and i dont have the tools, my old 02 sensor is still bolted to my old dump pipe because it was too dificult to undo...

also dont listen to anyone who says the falcon one is not as good as the nissan one, it may not have been made for nissan but it does the exact same job and has been doing the same job for atleast the past few years as proven by the forum entries by other people

Hi guys, does anyone know how to check o2 sensor? the reason is i'm just about to replace my new dump pipe and i wanna see if my o2 sensor still in good working order, otherwise i wanna change it as the same time as dump pipe

thanks for all inputs guys

Cheers

Edited by HCR32R

not really mod, just cut, twist and electrical tape it..... anyway what ever suits you i guess

also first time since owning the car,,,,, went to servo tonight and only paid $51 instad of $75 for a full tank, same driving as usual, still did 300km from last fill but i saved over $20 this week, i want to run it till empty but i also dont wanna have to fill up when petrol price cycle is at its peak,,,,,, petrol price was $1.50 / L

  • 4 weeks later...

Hey guys just changed my O2 man was it a bitch to get off damn those things are on tight, I guess because outside o2 will mess up the readings so it's understandable but just wanted to let everyone know that East Coast Auto spares sells the socket for $27 and they are great ppl to deal with. I just bought it and I doubt I'll really ever be using it again that much so if your in the area your welcome to stop by and use it, if you got a few bucks to spare it will be great to get lower what i paid for it but if your strapped for cash then don't worry about it just PM and I'll let you know when you can come by and use it. Also I made a small video for people that want to see what it's like changing the O2 sensor it needs lots of editing but I'll upload it soon

PS. Initial results are that my engine is running a lot leaner now which I'm glad cause I always thought it was running too rich also white smoke started to come out of the exhaust, if this happens to you don't panic it's fine, only should be worked if there is tons of it or the smoke is black

  • 2 weeks later...
Genuine just too expensive, grabbed an aftermarket one off ebay for around 90 .. a NTK one :O

Sorry to bust your bubble but if you would have read the thread, you would have seen that Kudosmotorsports is offering brand new NTK ones for $77 + P/H which makes it ~$86 express (Express being I ordered it at 4am on Tuesday, I got it in the moning on Thursday)

Sorry to bust your bubble but if you would have read the thread, you would have seen that Kudosmotorsports is offering brand new NTK ones for $77 + P/H which makes it ~$86 express (Express being I ordered it at 4am on Tuesday, I got it in the moning on Thursday)

Well to be exact it was $88 express posted, so $2 ain't that bad :O

  • 2 months later...

Guys, can anyone advise the output voltage from the R32 GTR Titania O2 sensors???

Mine cycle nice at 2000 rpm, but at idle.....Front one is 0.9 volt constrant, rear one is all over the place between 0V and 1.9~2.0V........I have a harsh idle, no wonder given one sensors not working :D

i thought they had an output of 0-1volt???

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...