Jump to content
SAU Community

Recommended Posts

Hi

i have a r33 gtst and just bought a 4294 gt42 precision turbo.

im stilk debating what housing sizes to go with.

i would love 1000hp out of the car but i know its costly and i dont want anything less than 800hp..

i have all the supporting mods to make the power and i want other opinions before i order the housings..

any help would be great

Link to comment
https://www.sau.com.au/forums/topic/432449-turbo-housing-opinion/
Share on other sites

What are you plans for it? Are you just chasing numbers?

The larger the rear housing, the more torque and power, it also makes the top end more responsive at the expense of the low end = lag.

I have already done the following mods

forged bottom end with billet crank

Tomei type L fpr

bosch 023

Z32 afm

1000cc injectors

splitfire coils

fmic

greedy plenum and 92mm throttle body

exhaust

hd clutch with gtr racing flywheel

haltec ecu

other random stuff boost controller turbo timer etc

im yet to do the head and cam woek with studs and the new turbo im buying asap..

i will have the current engine for sale soon it is making 366rwkw at 25 psi.. pm me for details.

thanks for your advice scotty.

i am useing the car as a daily drag and track.. i also want the numbers as im more than half way there with all the parts i have wanting to build a engine..

so basicallyif i went with a larger rear housing i will have some lag at lower rpm..

its my daily aswell so i dont want to be boosting under 3000 to much anyway but i dont want it to be laggy if i put my foot down i want response aswell..

Would you recommend any size housing or put me onto a post that has b3en over this before ?

if any one else has some advide if would be good..

once again thanks for your help scotty

Edited by donburtron

I dont mean to upset your 1000hp dream but your your going to need a f**k load more supporting mode to get even close to your goal. Z32 afm maxes out at 370ish kw. What capacity rb is it? If rb25 it is going to be a laggy dog to drive. Also ridiculous for a car with that turbo to be a daily driver. I hope you have at least 50k min yo bhrn.

its school holidays again isny it? Hahs.

josh

Unless you have a 1000hp car or had you dont know what you on about..

http://www.nzefi.com/packages/power-upgrade/nissan-skyline-r33-rb25det/

That link will give you some detail but go ahead and contact them and you will see you wont need that much money to do it..

With a good mechanic and cheap parts supplier that i have you can do it in half the money..

iv already got a rebuilt box and diff aswell that i havn mentioned so if you just want to press buttons on the keyboard you might aswell get off this forum and keep studying year 10 though out your school holidays..

and maybe some spelling lessons

Edited by donburtron

I didn say im useing a z32 maf..

that is on the engine i have not making 366rwkw and running perfect..

thay engine i am selling as i have another engine for rebuild

a ford lightning maf will to about 800 to 850 hp or i can use the z32 and put a new sensor in it and tune from scratch..

people please read the post before you reply

Edited by donburtron

Mate I think you have no idea.

your looking at at least 7k-10k just to build a cylinder head to make 1000hp at the wheels.

You'll need a built rb30 bottem end grout filled, enlarged oil return holes, rb26 bearings for the big ends for better oiling ect. Plus all the other machine work done to handle that power. 1/2" head studs. And I could go on. Minimum of 10k just in the bottem end. Dry sump external pump and blah blah blah. Atleast 5k in the exhaust manifold custom cooler piping ect. Ect. Then yiur going yo need a ppg dog box built or holinger just to handle that power theres 10k for a ppg or 20k for a holinger.. Stock box will be farked qiuck as. Triple plate clutch. 3k there. Then you need a big brake kit, 5k. Furl setup. 4 bosch o44s and at least 2000cc injectors.there 3-4k. And I can still g po on with all the other things you neec.

So have fun building a 1000hp skyline for 20k haha.

as I said must be school holidays.

josh

if you could read you would know the clutch in the gearbox now is not the one im useing..

i have a complete r33 gtr gearbox and diff setup with a nismo clutch..

If your read before you reply i would have to answer these questions twice..

and im happy you know how to research clutches in google..

This forum is full of cockheads that think they know eveything and still prop sucking on mums titty..

im glad i got some better information i asked for on other forums cause i sure know what forum is better..

Pfft so every single triple plate clutch in the world is 2099 dollars is it? Which brand? And tell me why do you have a gtr box in a gtst? Also a gtr box and gts-t box box have ghe same internals. So a gtr box is no stronger. And at 1000hp a gts-t/gtr box will go bang crack crunch before you know it. Do your research and you would kniw this. You really do have no idea. Ive built and played with quite a few high hp rb's mate and I know whats involved.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...