Jump to content
SAU Community

Recommended Posts

Hopefully you guys bring some Skylines to my town rather than the BRZ/86 invasion of the last meet....

Haha leaving the skyline at home to bring the Sil80! but yes the more Nissan the better.

Boo!! I was shattered last time when I rocked up to see only one (Gold 33 GTS-T) Skyline participating! I think there were a couple of others that were running around in the morning but had finished by the time I got there.

Wish mine had an engine.... All this action on my door step but nothing to play with. Should pull out the Datto ute... Lacks horses though...

Boo!! I was shattered last time when I rocked up to see only one (Gold 33 GTS-T) Skyline participating! I think there were a couple of others that were running around in the morning but had finished by the time I got there.

Wish mine had an engine.... All this action on my door step but nothing to play with. Should pull out the Datto ute... Lacks horses though...

Lieeeesssss, there were a few of us there... But yes, definite BR86 invasion at the last couple!

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...