Jump to content
SAU Community

Recommended Posts

I like where you are going there Mick, serious potential for you there - you could use RB26 pistons and short rods (so it will sound awesome) to make a 1.7litre... put a T66 on it with a 2" exhaust and get 50psi by 3000rpm. Will be tough!

  • Like 1

BAAAAAAHAHAHAHA! :D Just wondering if the T66 might surge making 50psi @ 3000? Maybe I should put a bigger exhaust on to increase lag say something silly like a 3.5" system and bring the turbo on around 1000rpm later? ;)

I like where you are going there Mick, serious potential for you there - you could use RB26 pistons and short rods (so it will sound awesome) to make a 1.7litre... put a T66 on it with a 2" exhaust and get 50psi by 3000rpm. Will be tough!

Lol as long as your car "sounds fast" the chequered flags yours!

I am never going to race so i give no farks about about chequered flags. Re some good tunes every time I drive the car...well I would take this sound any day I drove my car...who cares if its slow

https://www.youtube.com/watch?v=FzvMQdxUPsM

https://www.youtube.com/watch?feature=player_detailpage&v=V667PHZwaYI#t=815

Ask Gerg_31 (I think that's his name) I would bet that whilst his non turbo'd, open throttle bodied RB26 engines he was playing with would have made only average power, they would sound much like the amazing Hakosuka with the right exhaust. Turbo's are an unfortunate muffler of raw engine sound. They take the individual pulsations out to a large degree.

There is some merit to the "sounds better goes better" ideology. I put an exhaust on my VL when I was 19, probably made zero more power but f#$k I felt fast! I'll trade in my noise for power anyday however. Show with no go only tingles in your balls for so long....

I am never going to race so i give no farks about about chequered flags. Re some good tunes every time I drive the car...well I would take this sound any day I drove my car...who cares if its slow

https://www.youtube.com/watch?v=FzvMQdxUPsM

https://www.youtube.com/watch?feature=player_detailpage&v=V667PHZwaYI#t=815

Now thats what i am talking about. what a sound, sheer perfection

This is why I love my slow alfa so much.

https://www.youtube.com/watch?v=2YIRhzKDamg

Edited by XGTRX

500-1000awkw

that's also a huge range! It really comes down to what engine characteristics you are chasing. for a street car more torque pretty much always makes a quicker nicer to drive car. I know I rather a 300kw rb2530 than rb25 due to the far improved driveability. ( and that's why I went for a 30 bottom end) Edited by superben

What i was trying to say is that id rather keep the 26 and spend the cash on other areas of the car. Id be quiet happy with 300-400kw on a 26. Then again some might not comes down to personal choice i guess. I wouldnt change the 26 if i was going with twins or a average to decent sized single.

I'm with superben. Displacement adds drivability.

Having said that I have sacrificed some low end torque with my new setup for the sake of having a nice sound to listen to, and gone for some big cams and a massively high flowing exhaust.

I think many of you focus too much on which rod ratio is better and are afraid to go much shorter than stock. In small piston engines like the RB's it doesn't really make a lot of difference with reliability/longevity of the motor. Its not as though the engine is throwing around 4" bore pistons. The SR23 engines with 137/91 = 1.5, with a 89mm more is a good example.

There are advantages for the short rod ratio engine in a street car too. The main one that comes to mind is that a radically ported head will work well at lower engine speeds, due to increased piston speeds and higher vacuum pull. This is part of the reason Piggaz's combination works so well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...