Jump to content
SAU Community

Towing With The C34 Stagea - Our Experience

C34S2STAG

By C34S2STAG,
in Four Door Family & Wagoneers

 Share

Recommended Posts

  • 1 month later...
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

There are guidelines but they don't mean much. The AA lists the 3.0L Maxima (of course it doesn't have a listing for the Stagea) as 500kg unbraked and 1200kg braked but there appears to be no enforcement. People pull huge boats and caravans with impunity. The tow bar on my Stagea has a plate saying 1200kg braked but I have towed a two axle car trailer with only over-run brakes carrying an 1800kg car so over 2 tonnes.

Duncan Grand Master

Duncan

Posted
Posted

yeah the rules vary from state to state (and country for Bob!) too.

In NSW you can tow to whatever the manufacturer specifies (it used to be based on car weight but that is kind of a silly rule).

Since all Stageas came in under SEVS or RAWS, the manufacturer is whoever complied it. So really the legal NSW limit should be whatever a compliance shop is willing to say it is (and they then take the liability if they over estimate).

Also keep in mind the tow bar needs to be engineered as well for a given load if you want to ensure it is legal

  • 3 weeks later...
MANWHORE Grand Master

MANWHORE

Posted
Posted (edited)

Here's my Stagea (a white one) towing my boat (the red one) at around 2 tonnes on a weekly basis and towing a mate's boat (the blue one) at around 1.5 tonnes once

My stagea has a once off custom lift kit fitted - car, towbar, liftkit, exhaust, brake upgrades, everything are all for sale in the for sale section (shameless plug). Liftkit keeps the car at about 400mm guard to hub centre loaded with people, 4wd recovery and towing gear, LPG system and 200kg of ball weight (totalling over 500kg extra weight in/on the car)!

post-10214-0-32679800-1390562280_thumb.jpg

post-10214-0-74644900-1390562624_thumb.jpg

Edited by MANWHORE
  • Like 1
  • 3 months later...
XRATED Veteran

XRATED

Posted
Posted (edited)

Just thought I'd chime in too...

I've been really impressed with the towing ability of my s2 auto lately. Boats, race cars etc...

Centre diff lock has been really useful at the boat ramp and on grass/mud.... even with low profile tyres and coilovers (reasonably low) and a race car/trailer.

We towed the drift car (rb25 s13) this weekend... with 8 wheels/tyres, 3 people, gear, spares, tools and 100lt of fuel 200km from Hobart to Simmonds Plains.... it was a very well built car trailer, but we sat on 110 most of the way no worries, maintained 90km/h + up hill, including overtaking uphill...

Stock rad/fan/shroud, upgraded trans cooling, MV shift kit, cooler kit, 10psi, nistune, coilpacks and r34 brakes. No cooling issues, no trans issues, no braking issues and enough power/torque to not be annoying.

.... the only thing that kind of sucks is the fuel consumption of BP98. But hey, what else will tow that much, that can fit that much stuff, handles that well and is as fun for under 20k?

Cheers

J.

Edited by XRATED
Dobo Contributor

Dobo

Posted
Posted

Sounds great Justin, also interested in your l/100ks. For comparison when i towed my s13 the 500km round trip to winton i got 17l/100ks. pulling 2tn trailer and car with the stag packed full of shit. Mine is way for stock than yours, stock boost, cooling and brakes, front mount, coilpacks, coilovers and that's about it, mine is manual though and i stayed in 4th the whole way, pushing 3.5-4k rpm trying to keep up with the v8 tow boats :P

  • 1 month later...
iruvyouskyrine Grand Master

iruvyouskyrine

Posted
Posted

Good read thanks for all that had input. This is making me want to get rid of my ute and get a stag!

Realistically i will only be towing once every 2 months at most so fuel consumption shouldn't be too much of a problem. Any before/after of how much better the stag towed when you put the RB30 in duncan? I have a spare 30 bottom end here i could slap in if it makes a significant difference I would keep the standard auto trans with another trans cooler and hopefully that would be more than enough to keep it cool.

Anybody else have any input, still umming and aaring as to whether or not i get one, would love to have a practical daily car!

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Good read thanks for all that had input. This is making me want to get rid of my ute and get a stag!

Realistically i will only be towing once every 2 months at most so fuel consumption shouldn't be too much of a problem. Any before/after of how much better the stag towed when you put the RB30 in duncan? I have a spare 30 bottom end here i could slap in if it makes a significant difference I would keep the standard auto trans with another trans cooler and hopefully that would be more than enough to keep it cool.

Anybody else have any input, still umming and aaring as to whether or not i get one, would love to have a practical daily car!

I use my wagon for towing and don't usually boost it that much as it has good low down torque with the RB30 block.
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

I use my wagon for towing and don't usually boost it that much as it has good low down torque with the RB30 block...although to be honest there's no "slapping in" the 30 block with awd - there's a bit of work adapting the awd sump to fit!

Dobo Contributor

Dobo

Posted
Posted

Yeah going up the hills on the hume i was pushing a steady 5+psi just to keep up, didn't really show on the fuel economy though. Do it Josh. best daily I've ever owned. Only thing is i love my manual, but towing is the only time I'd wish i got an auto.

XRATED Veteran

XRATED

Posted
Posted

Honestly I thought I was going to end up converting mine to manual, but the MV upgrades are more than good enough to make the auto fun/fast on the daily grind.... plus is a real bonus towing.

iruvyouskyrine Grand Master

iruvyouskyrine

Posted
Posted

More info about the "MV upgrades" please justin? As someone who has only ever towed cars with a manual 4.2TD Landcruiser i am new to the whole automatic side of things haha. I thought a decently sized trans cooler would be sufficient?

zoomzoom Mentor

zoomzoom

Posted
Posted

There is a "stage 1" valve body upgrade which I understand is aimed at towing purposes. Stage 2 is performance oriented with fast shifts. It may also be useful for towing as when I installed mine, MV autos explained that it increased the flow of the cooling systems, which would be aided by a larger cooler.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • soviet_merlin
      R32 GTST - 600KW+ RB28/CD009 Build

      By soviet_merlin · Posted

      What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...