Jump to content
SAU Community

Recommended Posts

3.5L runs a different plug, and has different CAN protocols. The 2.5dd, 3.0dd and 2.5det all run the same ecu plug with slightly different pinouts.

Most 3.5L ecu's will work, without cam actuation. If you want the cams to work, you will need to reprogram the frequency/degree and self learning, which only the Haltech Elite can do afaik, and without Haltech support you are up the creek (as Mercury found out the hard way). Short story- Don't bother at this time.

  • Like 1
  • 4 weeks later...

Hi... I'm Rick and I'm new to the stagea forums... I have a a m35 arx and.am about to start modifying it... As for ecu options I have read all the covered options and decided to do some searching of my own... The only other option I found other then what has been covered is something called UP REV OSIRIS TUNER... I believe rev zone are the dealers in melbourne for this. I have spoken to them and they want to see my car and plug in a diagnostic to see if they can licence the ecu... Anyone been down this path???

The only ecu options available and proven is the Emanage piggyback, or the HDI Maxrom afm signal bender. (unless you can find a discontinued VQ25det specific loom for the HKS Fcon Vpro. This is by far the best option, and the most expensive)

The Adaptronic has issues, as does any other standalone at this stage. Personally it's hard to go past the Emanage Ultimate in Melbourne at least, as there is a tuner here willing to touch it.

The Osirus dongle can't read our map, it just comes up as jibberish, corrupt data, as ours isn't the same OBD2 protocol as they are used to dealing with. We tried this path years ago and nothing has changed to my knowledge.

What are your power goals? I can suggest the best option for you that way.

  • Like 1
  • 3 weeks later...
Just translated it..
For that price you may as well just get an emanage..
Description of item It becomes NISMO computer.
Dirt.
It is not failure of the coupler.
There is no problem with the mounting portion.
Data is unknown.
Seal is not affixed to the full.
Operation verification ending.
There are a small wound. Detailed condition, please refer to the image.
Edited by Reaperblitz

Just translated it..

For that price you may as well just get an emanage..

Description of item It becomes NISMO computer.

Dirt.

It is not failure of the coupler.

There is no problem with the mounting portion.

Data is unknown.

Seal is not affixed to the full.

Operation verification ending.

There are a small wound. Detailed condition, please refer to the image.

The nismo is something you want to use combined with the emanage. It fixes a few issues the emanage can't. Speed limiter and throttle issues etc

80000YEN is not good deal for nismo ecu, it could get an e-manage with tuned around 1300AUD

I don't think you fully understand just how different a Nismo ECU is, compared to a stock one.

I don't think you fully understand just how different a Nismo ECU is, compared to a stock one.

I am also using aftermarket ecu right now. I just want to say the low value compare with the high price. I was not saying nismo ecu equal to emanage.

I am also using aftermarket ecu right now. I just want to say the low value compare with the high price. I was not saying nismo ecu equal to emanage.

i would agree with this, i don't think its worth the price

i would agree with this, i don't think its worth the price

If it was it would be sold already.

Interesting that the emanage is still the most capable ecu on the market at the moment, and the only things it doesn't get rid of is the Speed and rev cut. If those worry you, then any way around them will be expensive.

180 km/h limit ?

Damn, I was looking forward to testing my stock brakes and suspension at 200 +

you can buy HKS SLD (speed limit defencer) to unlock 180km/h if you can't find cheap aftermarket M35 ECU.

you can buy HKS SLD (speed limit defencer) to unlock 180km/h if you can't find cheap aftermarket M35 ECU.

Agreed, mine works well, but understand you are cutting the main CAN communication lines to install it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...