Jump to content
SAU Community

Recommended Posts

The caltex on main north road in Salisbury is overcharging for e85. It should be around 20 to 25c below 91 unleaded, the last time I checked it was only 5c below. It's a pity as it's on my way to work. Is this the same for all caltex servos?

Reduced range is the only drawback, and jerries can fix that.

United have a great app for finding e85 servos nearby, although it can be slow to be updated.

Scotty you are the E85 man so rather than doing a search can you answer this quickly.

Does the decreased cost of E85 negate the reduced range?

I'm not 100% on the cost of E85 and from what I have read it's about 30% more fuel?

...

Does the decreased cost of E85 negate the reduced range?

...

Have a read of this over at LS1: E85: A Long Term Evaluation.

Based on his data, over about two years, the cost per km of running E85 was pretty much identical to running PULP.

However that was posted in October last year so prices (and how they compare) will have changed again since.

Ive read on here multiple times people saying e85 is cheaper, but you use more lf it so it ends up more expensive. But e85 seems to be about 25-30% cheaper than 98. If you use 25- 30% more fuel, wouldnt you assume itd end up equal? (obviously depending on how you drive.)

*im no mathematician :D

if you drive "sensible" it equals about the same, put your foot in and can almost see the petrol needle drop. on average day to day driving I lost 100kms per tank switching to e85, but pay about $20 less per tank. also made 40kws from the change.

WOW! That answer couldn't be further from truth! E85 will be 1 of the best things you do to your car :) 100 is just 98 with 10% ethanol (I think) will be nowhere near the same power gains or the same driveability 70% or 85% ethanol will offer. If ya not too accelerator happy increased fuel consumption will be minimal with a good tune.. But its hard not using it with the new found powerz lol :)

Dont bother with E85. Too much hassel for the gain. Try united 100. Almost the same power gain without the issues and costly setup of E85.

Just curious, what gains in performance are there from a lightly modified standard turbo car? I have a friend with the following mods who wants e85 but I think the money is better spent elsewhere... Anyway:

Eg rb25 with standard turbo, 12psi, standard motor, pod, fmic, nistune, 3" exh etc?

Making around 190-200rwkw, could he expect the same increases in power as someone with 300rwkw going from 98 to e85?

Been having a read of this thread - is there enough scope in stock RB25 NEO injectors to run e85 with the stock turbo?

Been having a read of this thread - is there enough scope in stock RB25 NEO injectors to run e85 with the stock turbo?

Doubt it... they are pretty small (370cc i think)...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...