Jump to content
SAU Community

Recommended Posts

  • 2 months later...

When the AWD glide was still in my car I was able to run 10.4 not using the transbrake with a real lazy footbraked 1.7 60ft launch. Tried the transbrake few times and it just spun as I didn't warm up the rear tyres in my 33GTR.

Powerglide puts the power down so smoothly compared to a manual. Defienatley had a high 9sec pass with a decent launch. Power plant was a Rb26 with hks 2530's with a manual normally make about 600awhp.

  • Like 1

When the AWD glide was still in my car I was able to run 10.4 not using the transbrake with a real lazy footbraked 1.7 60ft launch. Tried the transbrake few times and it just spun as I didn't warm up the rear tyres in my 33GTR.

Powerglide puts the power down so smoothly compared to a manual. Defienatley had a high 9sec pass with a decent launch. Power plant was a Rb26 with hks 2530's with a manual normally make about 600awhp.

Did you change back to the manual??? What happened to the box?

  • 9 months later...

Already adapted to suit the RB block bolt pattern, tranfercase and bolt straight in, considerably more than the 5K mentioned above.

Ive been looking into it.....(and still researching it)

A straight built 2spd powerglide or Turbo 400 to take serious power, yes $5K and less.

And GTRPSI my phone app didn't let me see you post

Already adapted to suit the RB block bolt pattern, tranfercase and bolt straight in, considerably more than the 5K mentioned above.

Ive been looking into it.....(and still researching it)

A straight built 2spd powerglide or Turbo 400 to take serious power, yes $5K and less.

Already adapted to suit the RB block bolt pattern, tranfercase and bolt straight in, considerably more than the 5K mentioned above.

Ive been looking into it.....(and still researching it)

A straight built 2spd powerglide or Turbo 400 to take serious power, yes $5K and less.

Add to that 5k for the box these parts that you will require also.

Custom length and spline output shaft to suit transfercase.

Fabricated sump to clear the drive shaft when the box is massively rotated

Suitable length and angle pick tube to put the oil filter at the bottom of the new fabricated sump.

The dip stick takes some messing around to get it at a suitable height for when the gearbox is rotated.

Decent torque converter can be $1000-2000.

Shifter

Transcooler ect ect

Pretty quickly it gets to 10-12K.

  • Like 1

Add to that 5k for the box these parts that you will require also.

Custom length and spline output shaft to suit transfercase.

Fabricated sump to clear the drive shaft when the box is massively rotated

Suitable length and angle pick tube to put the oil filter at the bottom of the new fabricated sump.

The dip stick takes some messing around to get it at a suitable height for when the gearbox is rotated.

Decent torque converter can be $1000-2000.

Shifter

Transcooler ect ect

Pretty quickly it gets to 10-12K.

Exactly, and thats assuming you know what your doing......

http://shop.quaife.co.uk/nissan-skyline-gtr-6-speed-sequential-gearbox

Chuck this beast in! Perfect daily/quarter mile monster.

Rated for a lousy 750 hp. Waste of time for a "drag car".

@Ryan, have you thought about selling the output shafts and other bits as kits for GTR owners?

That way we could build up our own strengthened autos and just add the bits on to convert them to work with the GTR transfer case.

Would save everyone a shit load of development and you could recoupe some of your already made developement costs along the way.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...