Jump to content
SAU Community

Recommended Posts

Anytime I look for diff info, the same came up : 1.5way good for daily and time attack.. 2way are SH*T, only good for drift.


BUUUUTTTT... I was thinking about it... if 2way diff are so bad, then why did the BNR32 ( not sure about the others) came with 2way oem ?

Honestly, I never felt my car dangerous to drive/handle... or is that because my diff is worn and not really acting like a true 2way diff ?

As you can imagine, I'm on the hunt for a rear differential and was wondering if I could simply buy a 2way instead of sticking to 1.5way ( which are rarer to come by on the used market)

It's because 2-way and 1.5-way describes diffs in about the same way that "Stage 2" describes a cam. It's not enough information.

The definition of a 2-way diff is that it applies locking effect on both accel and decel. There is no component of the description that describes exactly how much locking effect is involved, except that it is approximately equal in both directions.

A 1.5-way diff simply provides less locking action under decel than a 2-way does. In this case the name implies a ratio of sorts between the two locking actions, but still doesn't say exactly how strong the locking action(s) is(are).

The factory R32 diff is a 2-way diff, sure. But who says it has the same degree of locking action that a tight-as-f**k aftermarket diff has?

I wouldn't use a 2-way (aftermarket) on a daily unless I absolutely needed it for some other part of that car's usage pattern, because they're not pleasant to live with. And also, unless you allow for it or drive aggressively to overcome it, the added understeer caused by a stiff 2-way diff can be not fun also.

1, 1.5 or 2 way is not really the issue in daily driving as said above, the issue is how "tight" or aggressively the diff locks.

a standard gtr diff is 2 way but not tight and you will never notice it as an issue in daily driving.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...