Jump to content
SAU Community

Recommended Posts

If this is TRUE, you could sue him for FRAUD and actually put him in jail. Looks as though either he has a man on the ground in Japan making fake auction/ dereg certificates, or he is doing it himself after the fact.

This is WORSE than just ODO tampering if this is truth.

**These are only my opinions, and as this is a public forum, my opinion is just that, an opinion, not gospel**

So 3 million yen = $31,000 AUD

10% GST = $3000

Shipping = $1500

Compliance = $5000

total cost to EL = approx $40,000 !!!!!

You paid $55,000 !!!!!

You do the math......

Cheers

The Baron

  • Like 1

If this is TRUE, you could sue him for FRAUD and actually put him in jail. Looks as though either he has a man on the ground in Japan making fake auction/ dereg certificates, or he is doing it himself after the fact.

This is WORSE than just ODO tampering if this is truth.

**These are only my opinions, and as this is a public forum, my opinion is just that, an opinion, not gospel**

Doesn't EL use the buyers agent Nobu?? You see him in the youtube videos, showing of the car right after his purchased them....

In his more recent videos, his been been moving really quickly past the dash so you don't see the ODO!

Disappointed to see MCM endorsing EL!!

In the auction sheet from dodgy imports it shows the damage on the left sill in front of the rear wheel which is just visible in this pic from first post., that is obviously not on the questionable sheet.post-107339-0-61314300-1396921728_thumb.jpg

In the auction sheet from dodgy imports it shows the damage on the left sill in front of the rear wheel which is just visible in this pic from first post., that is obviously not on the questionable sheet.attachicon.giftmp_post-134006-0-36809100-13967411851639529282.jpg

Which is the kind of damage you get when you graze a kerb while sliding the tail out on a track.......

Cheers

The Baron

So 3 million yen = $31,000 AUD

10% GST = $3000

Shipping = $1500

Compliance = $5000

total cost to EL = approx $40,000 !!!!!

You paid $55,000 !!!!!

You do the math......

Cheers

The Baron

This calculation misses a few things like customs duties. Use the Import Monster or J-Spec import cost calculator for a better estimate. I would say EL's cost is about $46k max - probably a few grand less if he uses one of his own workshops for the compliance.

Edited by dodgyimports

This calculation misses a few things like customs duties. Use the Import Monster or J-Spec import cost calculator for a better estimate. I would say EL's cost is about $46k max - probably a few grand less if he uses one of his own workshops for the compliance.

correct - but rough estimate - EL would not charge 'themselves' 5 K for compliance and GST is usually at reduced cost (nudge, nudege - wink,wink)

I think 40k is not unrealistic but even your 46K shows how poor this deal is for OP

Cheers

The Baron

That's dodgy as.

The fake de-reg is the kicker for me, that's fraud. if it was my 50k, I'd be asking for my deposit back in full and reporting them to the relevant people.

  • Like 1

Doesn't EL use the buyers agent Nobu?? You see him in the youtube videos, showing of the car right after his purchased them....

In his more recent videos, his been been moving really quickly past the dash so you don't see the ODO!

Disappointed to see MCM endorsing EL!!

You would hope that Nobu or the agent isn't in cahoots with EL, but anything is possible if the $$$ is right. It's entirely possible that all this is happening in Japan post auction/ before shipping, therefor, EL can't get done for ODO tampering in Aus.

You would hope that Nobu or the agent isn't in cahoots with EL, but anything is possible if the $$$ is right. It's entirely possible that all this is happening in Japan post auction/ before shipping, therefor, EL can't get done for ODO tampering in Aus.

Bingo!

Doesn't take a genius to figure that out....yet the authorities will probably turn a blind eye.

  • Like 1

Just finish a big big conversation at Edward Lee, huge update, and again, my english is bad, so please ask me if you don't understand anything I said. I will do this in a dot point format so hope it's much clear. Please read to end.

1. I don't buy this car, he will not sell this car to me.

2. He didn't refused to returned the deposit but he keep dodging the topic so I think if I force him to return the deposit or decided to go ACA or fair trading like many of you said there will be further turble like: #1. he will get a million reasons why I cannot get my deposit back #2. it may take forever to get my deposit via fair trading (I tried fiar trading befor and it took 2 years to get my bond back for the room I rent back when i was in university which was only $1200 AUD.) #3. Please put yourself in this situation and you really think yalling words like f**k f**k f**k and f**k in his car yard gonna help me get my money back? It's really harder to do than just saying, I'm really scared if I make things ugly with him I will never get my money back.

3. he is going to import another car for me and here is the condition:

#1, I will involve in every step of the process

#2, I choose the car, not him anymore I will use the website he uses called 4wheelers if I remembered it right.

#3, he have to provide the de-reg paper of the car.

#4, I get to inspect the car at JLM before I pay off the car.

#5, I made thoes conditions so whatever I say now he will say yes as long as I still do business with him.

4. Just talked to Japanese odometer check, he still think the codition is not good enough and I should take my money back and go to iron shef. So I will go talk to Phil Lee tomorrow. Because I trust JOC more obvioursly.

5. I always know I should go away, and I always know you guys are right. I am just too scared and too worry of not getting my 11k deposit back. Not that I don't trust you guys!

6. Any of you guys think a nice way to say? I don't want threaten and I know if I do he will make sure that I suffer more than he does.

7. I didn't make the thing I'm scared about clear, so I just added this one, I'm scared and worry about that he knows where I live, what I do for living, my phone and other personal informations. I mean If I made him loss his business, G.O.D knows what will he do to me.

Edited by Edifier

Sorry just saw that now.

Surprised no one noticed how it was missing the VIN number on it.

Was just about to point that out! And the supplied de-reg papers look legit. 60k in 2010, 80k in 2012 = about 100k in 2014.

10k per year so who knows how many were on original dash.

All dodgyness aside, grade 4, 100k, at around $40-45k it's not a bad buy.

Was just about to point that out! And the supplied de-reg papers look legit. 60k in 2010, 80k in 2012 = about 100k in 2014.

10k per year so who knows how many were on original dash.

All dodgyness aside, grade 4, 100k, at around $40-45k it's not a bad buy.

Yes, grade 4, 100k $45k is not a bad buy, but I want something better. My budget is below 70k anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...