Jump to content
SAU Community

Recommended Posts

There is already motorsport sponsors for the c/ship, so that should extent to anything further related to it as a value add rather than seeking additional.

Indeed DECA is different, and maybe not discuss this week... But DECA is the 'gateway' to motorsport for SAU Vic and the broader community. Lots started at DECA and are now on the track so certainly needs to be a part of the overall motorsport agenda.

There seems to be lots of rumours around about what is (or is not) happening to DECA itself... It would be good to see information surrounding that brought to members attention and also the sponsors. That comers back to the point around communication with member base, awareness and the feeling of involvement etc. Never know, someone might have a left field idea :)

Deca right now is up in the air. What was discussed in the wrap up thread has slightly evolved. Put simply, the future of deca is now out of our hands. Deca has allegedly been advised not to accept AASA insurance, meaning CAMS is the only option. AASA is aware of this and is working through it. We have overcome the issues we faced after the last deca and SAU Victoria has been invited back. The issue is that if AASA don't get up and we have to start running the event with CAMS then there will be some significant changes and increases in cost.

Once we know the outcome with AASA we will advise further.

We are working on other backup plans which could be pretty damn cool if they go ahead but they too will get revealed when we know where we stand.

Same. EVERYONE should get on it!

Some issues that can be raised:

- Lack of venues willing to accommodate grass root/club events.

- Bureaucratic/red tape issues for event organisers.

- Need for club track car registration to reduce costs.

- Noise restrictions at events.

  • Like 1

link to survey: https://www.cams.com.au/media/news/latest-news/cams-survey

also worth mentioning are that AASA licences (for eg national racing licence) isnt permitted at CAMS L2S events, even though its a step above the CAMS equivalent.

  • Like 1
Same. EVERYONE should get on it!

Some issues that can be raised:

- Lack of venues willing to accommodate grass root/club events.

- Bureaucratic/red tape issues for event organisers.

- Need for club track car registration to reduce costs.

- Noise restrictions at events.

Would you believe I filled it out earlier this arvo and that's pretty much what I said? :thumbsup:

I let them have it, easy 700+ words in the open comments sections just on all of that and why it's so broken.

I would encourage everyone to do the same also. Let them have it, CAMS need a lot of hard honest truths.

  • Like 1

link to survey: https://www.cams.com.au/media/news/latest-news/cams-survey

also worth mentioning are that AASA licences (for eg national racing licence) isnt permitted at CAMS L2S events, even though its a step above the CAMS equivalent.

Shared in the NSW Motorsport thread and the tarmac rally thread. :)

  • 2 weeks later...

Seen the latest CAMS newsletter?

Come and Try Days - which can be incorporated into club regular events

CAMS offering support to Clubs to run "Come and Try Days" for more details we need to contact CAMS Sport and Club Development Officer on [email protected].

Is this something new, could we work this in to cover our passenger/driver training points?

  • Like 1
  • 2 weeks later...

I've never done circuit racing before and i got roped into doing this 6hr thing with a few blokes i know. Iv drifted the car heaps of times with zero cooling issues. Gotta hit up a winton fun day to get a taste of this circuit racing people speak of. Excited to say the least :woot:

This is why I will be applying for my sau vic membership this week ash. Iv been itching to get amongst it all now that I no longer drift. Fun times ahead!

Whens the next round ash?

http://www.skylinesaustralia.com/forums/topic/437292-2014-sau-vic-motorsport-championship/

Just follow that thread mate, 19th July is the next and it's @ PI

Bit of a break in June, fair call too, weather can be sketchy.

Foook yeah for PI :D

Oooohhh if I get my brake pads and stuff in and fitted before the event then i'm IN.

Membership sent in :)

Edit: Who's used the Project MU Club racer carbon/ceramic pads?

Edited by LTHLRB

I use Club Racers on my road registered car, they work from cold and they hold up for a full sprint session, readily available for my calipers - good enough for me.

I wasn't experienced enough when using other pads to advise whether bite/modulation etc is better with these.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
×
×
  • Create New...