Jump to content
SAU Community

Recommended Posts

GTTR34 is selling some BBS rims (17x8, 17x9) for a good price. I'm just wondering if they'd fit on my GTS-t without modification to the body?

My car's currently got the stock rims and is lowered 320 front and 335 rear (yeah it's stupidly low), will they fit if I got some different springs etc...?

Link to comment
https://www.sau.com.au/forums/topic/44296-how-wide-can-i-go-r32-gts-t/
Share on other sites

With a front ride height of 315mm (...well it looked cool that low :Oops: ) i was able to fit 17 x 8 +30s on the front, and with a rear ride height of 340mm able to fit the same size wheel again.

The rims had 235/45/17s on them and on the front upper control arm, there was evidence that the rubber had occassionally rubbed on the control arm.

It looked as though the rim was clearing everything and the wheel didnt stick out past the guard, actually looking at how the rim sat in the guard, it looked better fit then the usual 17 x 7 +30 i run on the front. So with a 225 or 215 tyre it would have fitted and cleared everything, but a slightly different offset would have even the 235 tyre clearign everything. :cheers:

As for the rear, i think a 17 x 9 would go.... chase down the offsets, you may get lucky ;)

17x8 + 36

17x9 + 35

makes no sense to me...

thanks guys for the input so far.

Going by my car, id say the fronts will need a spacer, (with 8s on the front i think an offset between 25-30 will work

And the rears will go close as well, perhaps an offset of around 28-30 would work best with 9" rims

I just bought a new set of rims for my car, they were off a GTR with 17 x 8 +35 all round. I dont like my chances being a great fit, but as i have4 had my car raised and they will be for trashing aorund tracks, im not really too concerened if they stick out a little...worst case if they rub susp ill use spacers

I've just fitted 17x8 + 30 with 215-45 on the front. The car has 315mm centre to guard on the front. Sits just inside the guard with no scrub. With the +36s on the front the rims should sit further in than mine would and so you could probably fit a wider tyre without hitting the guard or needing it lipped. You may have some clearance issues in board though on your suspension upper arms or springs.

I have trial fitted the rears without tyres and jacked them up to where they would normally sit. They are a 17x9 +35, same as what you are looking at. They sit just inside the guard and there is about 10mm clearance at the back of the rim to the hicas steering arm ball joint. The rear guards will definately need lipping before the wheels will fit without scrubbing.

Yep, r32 gtst.

Had a bit of a spirited drive last night. There is a bit of scrubbing of the plastic liner if you are cornering hard and hit a big bump but i can live with that. Doesn't help that i'm running a bit of castor too, i think it's 8 degrees.

i have 18X8.5 front and rear with 225/40 streached over them so they dont hit the guards, i dont know the offset, but my guards have not been rolled.

these things JUST fit without hitting anything.

Bbenny i am pretty sold on 18x7.5 rims do u think an extra inch makes a huge difference. i am planning on running 225/40's as well... i have the same car as you. is your suspension fairly hard (coilovers?), do you just have the right offset, small enough tyres or the combination of all three that lets u run 8.5 inches all round. thanks heaps...

mic

hey mic i would say its a combination of all 3, i do have stiff coilovers, but it wouldnt matter if i had sponges in there because the offset is perfect so nothing can touch.

I think the 7.5 will be sweet, because i still have to stretch the 225/40 over my rim to ensure it doesnt rub the guard, i could prob go a slightly wider tyre, but not much, so go the 7.5 with the 225 and it will be sweet.

maybe even consider 17" if you plan on track or drag, but 18" does look the best :(

  • 2 weeks later...
  • 10 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...