Jump to content
SAU Community

Recommended Posts

GTTR34 is selling some BBS rims (17x8, 17x9) for a good price. I'm just wondering if they'd fit on my GTS-t without modification to the body?

My car's currently got the stock rims and is lowered 320 front and 335 rear (yeah it's stupidly low), will they fit if I got some different springs etc...?

Link to comment
https://www.sau.com.au/forums/topic/44296-how-wide-can-i-go-r32-gts-t/
Share on other sites

With a front ride height of 315mm (...well it looked cool that low :Oops: ) i was able to fit 17 x 8 +30s on the front, and with a rear ride height of 340mm able to fit the same size wheel again.

The rims had 235/45/17s on them and on the front upper control arm, there was evidence that the rubber had occassionally rubbed on the control arm.

It looked as though the rim was clearing everything and the wheel didnt stick out past the guard, actually looking at how the rim sat in the guard, it looked better fit then the usual 17 x 7 +30 i run on the front. So with a 225 or 215 tyre it would have fitted and cleared everything, but a slightly different offset would have even the 235 tyre clearign everything. :cheers:

As for the rear, i think a 17 x 9 would go.... chase down the offsets, you may get lucky ;)

17x8 + 36

17x9 + 35

makes no sense to me...

thanks guys for the input so far.

Going by my car, id say the fronts will need a spacer, (with 8s on the front i think an offset between 25-30 will work

And the rears will go close as well, perhaps an offset of around 28-30 would work best with 9" rims

I just bought a new set of rims for my car, they were off a GTR with 17 x 8 +35 all round. I dont like my chances being a great fit, but as i have4 had my car raised and they will be for trashing aorund tracks, im not really too concerened if they stick out a little...worst case if they rub susp ill use spacers

I've just fitted 17x8 + 30 with 215-45 on the front. The car has 315mm centre to guard on the front. Sits just inside the guard with no scrub. With the +36s on the front the rims should sit further in than mine would and so you could probably fit a wider tyre without hitting the guard or needing it lipped. You may have some clearance issues in board though on your suspension upper arms or springs.

I have trial fitted the rears without tyres and jacked them up to where they would normally sit. They are a 17x9 +35, same as what you are looking at. They sit just inside the guard and there is about 10mm clearance at the back of the rim to the hicas steering arm ball joint. The rear guards will definately need lipping before the wheels will fit without scrubbing.

Yep, r32 gtst.

Had a bit of a spirited drive last night. There is a bit of scrubbing of the plastic liner if you are cornering hard and hit a big bump but i can live with that. Doesn't help that i'm running a bit of castor too, i think it's 8 degrees.

i have 18X8.5 front and rear with 225/40 streached over them so they dont hit the guards, i dont know the offset, but my guards have not been rolled.

these things JUST fit without hitting anything.

Bbenny i am pretty sold on 18x7.5 rims do u think an extra inch makes a huge difference. i am planning on running 225/40's as well... i have the same car as you. is your suspension fairly hard (coilovers?), do you just have the right offset, small enough tyres or the combination of all three that lets u run 8.5 inches all round. thanks heaps...

mic

hey mic i would say its a combination of all 3, i do have stiff coilovers, but it wouldnt matter if i had sponges in there because the offset is perfect so nothing can touch.

I think the 7.5 will be sweet, because i still have to stretch the 225/40 over my rim to ensure it doesnt rub the guard, i could prob go a slightly wider tyre, but not much, so go the 7.5 with the 225 and it will be sweet.

maybe even consider 17" if you plan on track or drag, but 18" does look the best :(

  • 2 weeks later...
  • 10 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...