Jump to content
SAU Community

Recommended Posts

On 16/10/2016 at 11:28 PM, barnoon said:

Spotted a black or grey 33 on Hawkesbury road Springwood a couple of days ago. Gave me a thumbs up, waved back. I was in the white 32

Hmm, do you remember the plates and was it at night?  

I spotted a Grey 32 up there the other night too - Was parked next to an evo 

Spotted a white R33 with a gtr style wing pulling out of the Shell on Briens Rd Northmead heading towards Cumberland Rd this morning somewhere around 7:30.

Spotted a R31 on the way home on the same stretch of road headed in the opposite direction. Plate was 31DET if I remember correctly.

Spotted a matt black R33 with a drift lip style rear wing parked off wonderland drive eastern creek today.

And a red z32 300zx driving down Wonderland drive toward Walgrove road at about 2:15

Edited by Gibbon138
forgot the Z
On 27/10/2016 at 5:08 PM, Gibbon138 said:

Spotted a matt black R33 with a drift lip style rear wing parked off wonderland drive eastern creek today.

And a red z32 300zx driving down Wonderland drive toward Walgrove road at about 2:15

I saw the matt 33 also - Series 1 with MSpec front bar right?

  • 2 weeks later...
  • 4 weeks later...

3 different black R34 GTT's in Penrith today.

1st, Castlereagh/Mulgoa Roads at around 7:45 am. Stock looking body, FMIC, exhaust, staggered wheels, lowered.

2nd, parked in a car park I see it in a bit. Blody kit, exhaust around 10am.

3rd, 2:50 PM with vented bonnet and high GTT wing going to Autobarn

Spotted a GMG R33 GTSt (rego 94-GTST) yesterday in the car park in Winston Hills shops and was following it along Caroline Chisholm Drive, then Powers Rd, then Station Rd until I turned off into my street to head home.

I was in my white Golf wagon

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...