Jump to content
SAU Community

Recommended Posts

Even though a trans cooler is a must have, are you sure the shifting issue was due to trans heat and not an issue caused by the ecu change?

Very confident. I haven't had this issue at all on the street. Also the three runs where i let the car fully cool down I didn't have the issue, the three times i kept the car warm it had the issue.

  • 2 weeks later...
  • 1 month later...

Fitted up my r34 gtt brakes today. Also painted the rears black to match the front. While I was at it I changed my oil, diff oil front and rear and transfer case fluid.

For those playing at home I fitted QFM HPX pads front and rear

Nice productive day.

post-96472-0-54213800-1414825059_thumb.jpgpost-96472-0-61576500-1414825013_thumb.jpgpost-96472-0-55418600-1414824891_thumb.jpg

  • 2 weeks later...

Man I need some 18s. It's such a subtle upgrade but makes the wheels look the right size. I found a decent chunk out of one of my 17s yesterday and pointed it out to my wife, who subsequently claimed responsibility. Time to angle for a Christmas present...

  • Like 1
  • 4 months later...

Installed my nismo dash today.. instantly went from 105k to 180k. Also noticed missing screws holding the dash in, no guessing needed as to why... I wonder how many ks it really has

post-96472-14282791936371_thumb.jpg

  • Like 2

That's a crowded dash! If I had more time I would like to mess around with microcontrollers and the serial output on the adaptronic. Then you could integrate another digital display somewhere on the dash, instead of old school gauges.

  • Like 1

That's a crowded dash! If I had more time I would like to mess around with microcontrollers and the serial output on the adaptronic. Then you could integrate another digital display somewhere on the dash, instead of old school gauges.

There are digital race dashes that plug straight into the adaptronic, I just have many things that are higher priority with my funds. I do plan on moving those gauges one day.

  • 2 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...