Jump to content
SAU Community

Recommended Posts

yeah off the turbine housing, used a 45mm Turbosmart Hypergate

I've got heaps of photos at home, but check out instagram.com/traklife I've got a few photos here and there.. I'll send you some when I'm back home on my PC

  • Like 1

any advice on external gate ? i'm trying to decide between the turbosmart 40mm comp gate and 45mm hypergate....

hypergears own 50mm one is good and cheaper than the others.

Cool! well i've ordered the turbo, Stao doesn't have any wastegates at the moment. So i was thinking what size would be best and it made me wonder how to size it properly.. i spoke to a mate of mine said the larger the turbine housing the smaller the gate required and the smaller the housing the larger the gate required. does this sound right.. sort of does to me. there's a $150 difference between a 40mm and 45mm turbosmart gate..

Big turbo big boost = small gate

Big turbo small boost = big gate

Small turbo big boost = small gate

Small turbo small boost = medium gate

That's how I have seen a few people here size gates. *waits for Scotty*

I run 45mm usually, you can't run too much gate imo, it only helps with top end power after all, but 40 will be fine.

I can get the Turbosmart 45mm cheaper than the 40 at the moment. PM me for price. ;)

  • 2 weeks later...

That's an immaculate fit Johnny. Good to see more SS2 turbos feeding air to these motors! Did you get the hot side of your turbo modified to suit the external or did that come from Hypergear as an option? I'm thinking about running an external but I'd like to maintain the standard dump pattern.

Edited by SargeRX8

Thanks man!

I actually got the rear housing sent to scotty_nm35 to modify. I opted for the v band rear because I absolutely hate the nissan 6 bolt flange, always snap bolts lol

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...