Jump to content
SAU Community

Recommended Posts

Haha yeah, I'm all for having a laugh at myself but there has to be a line in the sand at what's funny or not and that crossed it I think

Well he does drive two really fast cars and a silly fast bike so he might be compensating for something :/:D

You have to be careful what you write, you never know WHO will see it, haha :woot:

If that's to case I think I need a few more really fast cars and a couple of big Bikes :yes::yes:

I remember seeing the video of this, bought a tear to my eye watching it :(

Reading this it reads like you think the guys building did something that cause it ?

there is a video ?

Fancy having to watch it over and over again, no thanks :no:

Experience Peter, I was sitting in a HQ ute while one mate was filling up and the numbnut next to me decided to play with a lighter just rolling the wheel on the flint

It ignigted the fumes in the cabin (Boom!) and lit up the filler neck. The attendant refused to come out with the extinguisher.

So I went back over after about 30 seconds and put the cap back on which extinguished the flame.

(Only the fumes were burning from the filler neck.)

We all lost eyebrows, some hair and a few years.

Farkin idiot

Sorry no vid ...

Fark, you blokes were lucky, it does not take much to cause what could have been a lot worse.

I had a 1936 Dodge when I was a kid, had just filled it up and was going like a DH , lost it and wrapped it around a light post, bent it in half , we all got out OK, well sort of OK. Petrol all over the place and my mate lit a smoke, everyone shit and he threw it on the ground, yes into the petrol and it went out, windy night no fumes I guess but it scared the crap out of me :nuke:

Yer thought I would go to my local racecraft engineer to get some end links made for my sway bar. I gave him the instructions & measures. With rose joint ends , a short and long extensions for a soft and hard setting. Left & right handed threads with matching locking nuts and tapped spacers. You get the picture, and a price tag to match. Only to find out later none of my measurements even came close to working . Engineer says to me try these, a male and female rosejoint screwed together 40 bucks.

  • Like 1

release bowser handle (natural reaction) and close lid (unnatural reaction) when fuel neck catches alight

maybe difficult to comprehend if first time and/or fear sets in

Man i wish i knew that, at first i thought the whole servo was going to blow up. But 2 seconds after I didn’t care.

I was more worried with saving my car then anything, i understand the servo attendant did not want to help but heck i just wanted my car. He could have at least given me the key to the fire exinguher box, i asked him like 6 times and was yelling at him towards the end.

Even the firemen said what the hell why was there no key in the box as that’s not compliant by fire safety standards. Also it was blocked by the servo bin that they have were the water bucket ect is.

They now have a key in the box, the break glass section is removed so even quicker access and no obstructions, yet they still claim no fault at all.

It took him like 2 min to hit the fuel cut emergency button when i ran in and told him there was a fire, he didn’t believe me.

The funny thing about the fuel vapours is. The servo was only renovated 2 weeks prior, it was the first service station in Aus to have this new technology installed that has a vacuum in the nozzles to suck out any fuel vapour.

I remember that for next time and I will have my own extinugher in the car.

I remember seeing the video of this, bought a tear to my eye watching it :(

Reading this it reads like you think the guys building did something that cause it ?

Yes and no, two different mechanics built the car and put it all together. Then a separate tuner.

I had also taken it too another two mechanics locally to get a few small things fixed up, i.e. catch and BOV issues and they never picked up on anything

I had also filled up about 5 times prior to this time so I was not expecting it

My worst modifying experience would be when i was being bloody ignorant by using only a scissor jack to hold up the car while changing my brake pads. The jack snapped and the car plummeted onto the rotors, luckily my foot wasnt under the car and my expensive brembos didnt take a hit. Since that day i bought 2000KG axel stands and 1800KG hydraulic jack as well as watching countless number of youtube vidz on how to properly jack up a car.

I've only got a scissor jack. do carry your hydraulic jack in your car at all times? aren't they big? or do you just use scissor for spare tire change? and hydraulic from home.

Throw a wheel under the car, under the sump or something. Will stop the car from Crushing you if it falls. I have had a car snap a jack as well. Always have something as a failsafe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
    • Run it in open loop for now, and drop the frequency down. This lowers the resolution and requires more duty cycle to do anything, however good to troubleshoot.
    • According to Josh, one of our local Americans, it seems the USA still can't get turbo systems quite right at a lot of places, so possible that they're not running great at all, but they've just not complained as NFI about getting it right...
×
×
  • Create New...