Jump to content
SAU Community

Recommended Posts

Haha yeah, I'm all for having a laugh at myself but there has to be a line in the sand at what's funny or not and that crossed it I think

Well he does drive two really fast cars and a silly fast bike so he might be compensating for something :/:D

You have to be careful what you write, you never know WHO will see it, haha :woot:

If that's to case I think I need a few more really fast cars and a couple of big Bikes :yes::yes:

I remember seeing the video of this, bought a tear to my eye watching it :(

Reading this it reads like you think the guys building did something that cause it ?

there is a video ?

Fancy having to watch it over and over again, no thanks :no:

Experience Peter, I was sitting in a HQ ute while one mate was filling up and the numbnut next to me decided to play with a lighter just rolling the wheel on the flint

It ignigted the fumes in the cabin (Boom!) and lit up the filler neck. The attendant refused to come out with the extinguisher.

So I went back over after about 30 seconds and put the cap back on which extinguished the flame.

(Only the fumes were burning from the filler neck.)

We all lost eyebrows, some hair and a few years.

Farkin idiot

Sorry no vid ...

Fark, you blokes were lucky, it does not take much to cause what could have been a lot worse.

I had a 1936 Dodge when I was a kid, had just filled it up and was going like a DH , lost it and wrapped it around a light post, bent it in half , we all got out OK, well sort of OK. Petrol all over the place and my mate lit a smoke, everyone shit and he threw it on the ground, yes into the petrol and it went out, windy night no fumes I guess but it scared the crap out of me :nuke:

Yer thought I would go to my local racecraft engineer to get some end links made for my sway bar. I gave him the instructions & measures. With rose joint ends , a short and long extensions for a soft and hard setting. Left & right handed threads with matching locking nuts and tapped spacers. You get the picture, and a price tag to match. Only to find out later none of my measurements even came close to working . Engineer says to me try these, a male and female rosejoint screwed together 40 bucks.

  • Like 1

release bowser handle (natural reaction) and close lid (unnatural reaction) when fuel neck catches alight

maybe difficult to comprehend if first time and/or fear sets in

Man i wish i knew that, at first i thought the whole servo was going to blow up. But 2 seconds after I didn’t care.

I was more worried with saving my car then anything, i understand the servo attendant did not want to help but heck i just wanted my car. He could have at least given me the key to the fire exinguher box, i asked him like 6 times and was yelling at him towards the end.

Even the firemen said what the hell why was there no key in the box as that’s not compliant by fire safety standards. Also it was blocked by the servo bin that they have were the water bucket ect is.

They now have a key in the box, the break glass section is removed so even quicker access and no obstructions, yet they still claim no fault at all.

It took him like 2 min to hit the fuel cut emergency button when i ran in and told him there was a fire, he didn’t believe me.

The funny thing about the fuel vapours is. The servo was only renovated 2 weeks prior, it was the first service station in Aus to have this new technology installed that has a vacuum in the nozzles to suck out any fuel vapour.

I remember that for next time and I will have my own extinugher in the car.

I remember seeing the video of this, bought a tear to my eye watching it :(

Reading this it reads like you think the guys building did something that cause it ?

Yes and no, two different mechanics built the car and put it all together. Then a separate tuner.

I had also taken it too another two mechanics locally to get a few small things fixed up, i.e. catch and BOV issues and they never picked up on anything

I had also filled up about 5 times prior to this time so I was not expecting it

My worst modifying experience would be when i was being bloody ignorant by using only a scissor jack to hold up the car while changing my brake pads. The jack snapped and the car plummeted onto the rotors, luckily my foot wasnt under the car and my expensive brembos didnt take a hit. Since that day i bought 2000KG axel stands and 1800KG hydraulic jack as well as watching countless number of youtube vidz on how to properly jack up a car.

I've only got a scissor jack. do carry your hydraulic jack in your car at all times? aren't they big? or do you just use scissor for spare tire change? and hydraulic from home.

Throw a wheel under the car, under the sump or something. Will stop the car from Crushing you if it falls. I have had a car snap a jack as well. Always have something as a failsafe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
    • Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...