Jump to content
SAU Community

Recommended Posts

Batch 1 has been ordered and paid for with the Factory and product time is 25 days so now the wait starts.

Thank you for all the local guys who commited and the fellows from Canada and the USA - You got a bargain with the Exchange rate! Should of charged you double.

Oh well not in it to make money:)

Ok well the car is back from a fresh coat of paint and looking smick!

post-23119-0-99168600-1430627008_thumb.jpg

Well now back to the project, All fitted up ready for the harness to be matched up from the OEM CAS wiring.

post-23119-0-30786700-1430626968_thumb.jpg post-23119-0-88659300-1430626970_thumb.jpg

post-23119-0-37346800-1430626973_thumb.jpg post-23119-0-53413900-1430626975_thumb.jpg

News from the Factory puts the first batch about 2 and a bit weeks away...

  • Like 3

Ok well the car is back from a fresh coat of paint and looking smick!

attachicon.gifFB_IMG_1429344047462.jpg

Well now back to the project, All fitted up ready for the harness to be matched up from the OEM CAS wiring.

attachicon.gif20150503_141007.jpg attachicon.gif20150503_141024.jpg

attachicon.gif20150503_141031.jpg attachicon.gif20150503_141036.jpg

News from the Factory puts the first batch about 2 and a bit weeks away...

Car looks awesome so do the parts!

  • 2 weeks later...

They are still due to be shipped on the 25th From the Factory as planned. I spoke to the Factory Saturday evening and production has started and they will be out for finishing around Wednesday.

Guys,

I have two sets coming without being spoken for. IF your interested let me know and I'll put you on the list.

Final lot of parts off to be finished in Black.

post-23119-0-08966500-1432370019_thumb.jpg

Dads Birthday pressie also made just for a bit of fun for a small steam engine

post-23119-0-40716100-1432370019_thumb.jpg

Edited by murrayis

Hey Guys,

Slight Delay in shipment due to there being a flaw in the finish of one of the items. I've chosen to have it refinished rather than shipping a defective product. I hope you can understand.

The factory has said they will have the parts back tonight and will provide pictures on the finished products before shipping tomorrow

Thanks for your understanding.

Guys

Shipping has been arranged and awaiting confirmation of pickup. Tracking numbers will be dispatched in 2-3 days once they reach the Forwarder.

Everyone will get an email with these details asap.

Cheers

Cameron

Edited by murrayis

Morning all,

Batch 1 is now official and has arrived! I've just unpacked the Aussie stock to ship out later today and I could not be happier with the result.

I hope everyone is happy with their product once it arrives!

post-23119-0-55144800-1433122139_thumb.jpg post-23119-0-10481200-1433122142_thumb.jpg post-23119-0-06661100-1433122145_thumb.jpg

post-23119-0-48867900-1433122146_thumb.jpg post-23119-0-91522300-1433122147_thumb.jpg post-23119-0-39728500-1433122149_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No chop chop of anything mate, it is what it is, plus, I don't want any air that isn't either going through the cooling stack or intake getting into the engine compartment increasing under bonnet pressure  Yeah, the Mazda Speed aftermarket intake above is less than ideal for multiple reasons, the requirement to remove the bumper every time you need to service the filter, and also smaller in diameter than the NC1 OEM one Weirdly, Mazda Speed is part of the Mazda motorsport division, "form over function" and $$$$$ for Mazda from unsuspecting punters I suspect  After some googling about them it seems they added no power, but do increase some induction noise Meh In other news, the electricians have been busy today at the house, and are back tomorrow finishing up all the security stuff and exterior lighting, they also added some lighting on the garage ceiling, which will come in handy when working in the garage when it's not freezing out there My Birdies raised garden bed also arrived today as well, which I'll put together and place tomorrow, it's a big tall Bessie, 74cm high, 92cm wide and 214cm long, this will come in handy as I am starting to get "stockpiles" of good soils from doing landscaping, some of the clean rock, namely the river stone, will go into the bottom of the bed for drainage, as well as the old Apricot tree that was out the back,  and when it's full, I'll grab another one, I will be growing enough veggies to keep me both busy as well as supplementing the shopping list I'm also awaiting another quote for a new Colourbond front fence, as the "1980 style cemented in rock edging" that was there and "fashionable at the time" looked arse, and my god, the amount of cement used to fix the rock was insane, it took 1.5 days for me to break out 12 meters of the stuff by hand, trim the bushes back to the fence line and dump it out the back of the joint to deal with at a later date,I will soon need a skip bin to tip it all Unfortunately they did alot of the cemented in rock around the joint, which I hate, so a few pallets of retaining wall blocks for around the front and back where the cemented in rock is will be required to bring it up to a standard, and look, that I will be happy with 12 meters worth of rock and cement Finished smashing the fence line and ready for a fence to be installed, yes, the lawns need some TLC and thickness, the previous owner trimmed the grass to the roots 😢, the TLC I can provide, and nature over time will do the rest And there's probably about another 40 meters worth of this landscaping abomination left to do around the front and back gardens, I'm guessing maybe 3 or 4 tons worth, tip fees for this will be a killer Meh, all in all I'm having fun and keeping busy, plus, it's good PT
    • If I drove to a typical petrol station, what would my choices of fuel be? 
    • Just cut the bottom of the guard out. It's no longer got a big duct, to a sealed box, or a restriction. It has all the cold air from outside. Also, that cai you showed looks terrible. Bends are NOT good for go gos!
    • Like I said, "black magic" LOL In the end,  it is what it is, and hopefully, what this here knuckle head has done is an improvement and not a hindrance Not that I actually notice any negatives now, or that I will get any seat of the pants benefits when all is said and done, but best practice says I shouldn't be pulling intake air from the hot engine bay  Famous last words: I cannot see it being any worse than what it is at the moment 🤔
    • If the gases flowing in those two tracts had the same properties, you could maybe use such broscience. But the exhaust has a different composition, different normal density, different actual density (because of different normal density, and mostly because of the massively higher temperature), and different viscosity (again because of much higher temperature). Consequently, all of the fluid dynamics parameters that matter, that you calculate from these inputs, such as the Reynolds number, friction factors (for wall friction) and so on, are all incomparable.
×
×
  • Create New...