Jump to content
SAU Community

Recommended Posts

hi there i have a 1977 c210 that is running rough at the moment do they have general problems with there carberators , i have changed the coil / spark plugs / tested leads & next thing i am thinking of doing is overalling the carbie .

spoke to a previous nissan mechanic from tha seventies & he did nothing but bag the l24 motor saying that they where renound for wearing out cams due to poor lubrication system & said they where nothing but a hassel to work on.

i left his workshop thinking surely they are not that bad . i am a previous v8 ford / holden man & know little about early model skylines . any reply would be great cheers my77sky

the are awesome compared to what holden had at the time

remember the L6 engine was first used in 1969

so it is an old design and in front of tech than even todays LS V8 engines, OHC anyone?

hi there i have a 1977 c210 that is running rough at the moment do they have general problems with there carberators , i have changed the coil / spark plugs / tested leads & next thing i am thinking of doing is overalling the carbie .

spoke to a previous nissan mechanic from tha seventies & he did nothing but bag the l24 motor saying that they where renound for wearing out cams due to poor lubrication system & said they where nothing but a hassel to work on.

i left his workshop thinking surely they are not that bad . i am a previous v8 ford / holden man & know little about early model skylines . any reply would be great cheers my77sky

the mechanic who bagged the L24 probably another holden or ford fanatic,

the l24 is pretty much an indestructable motor, reliable and simple..i never know problems regarding lubrication, or that wearing out

cams?? was he kidding. i have owned skylines which have done in excess of 500.000kms the cam was never

replaced..maybe this mechanic was approching the dementic age,

if you need to compare the holden vb commodore or the xc ford of that time compare to a c210 skyline

the quality is such that the holden or ford belong in noah;s arch..along with that stupid mechanic..

cheers to all skyline owners

  • 1 month later...

dear bro'S

i am newbie from malaysia...nice to know c210/c211 owners

just buy c210@180k sedan,car is slightly rusty ..send the car for bodywork and painting

i have question here

i want to take out my original axle and put drive shaft rear end,can i plug n play 180sx or rps13 rear end?

another thing is adjustable suspension...my frenz say can put 180sx or cefiro a31,just need little modification..is it true?

thanks for the help

Edited by boxer_power
  • 3 weeks later...

Wrong Thread dude!

Try www.r31skylineclub.com

:thumbsup:

How is it the wrong thread? He has a C210, and clearly posted that he bought a front cut to transplant into said C210.

Welcome boxer_power!

yes 180 sx struts will fit with some minor mods, the front will require a bit more work than the rear, use the search function, there is plenty of information on the subject.

Cheers

Jason

  • 2 weeks later...
  • 4 weeks later...

hi there my 1977 datsun / skyline is running like a clock now , a mate pulled the carbie off & it had some crap in it . looking forward to catching up with everybody at the all japan day at silverwater .

cheers my 77 sky

  • 3 weeks later...
  • 5 months later...

any

R30 diff is an R180(So is the C210's) but they are tuff as anyways...only reason to put an R200 would be for the lsd that is harder to get for R180's and for that lil extra strength if you are doing a LOT of clutch dumping with big rubber.....

Rear struts are straight bolt up....tailshaft is bolt up.the only thing MAY be the width of the rear subframe....but that shouldn't be a problem either.....

I have a complete rear clip for the r30 sitting in my shed ready for my C210 coupe.....havent measured it but cant see a problem( hang on,, im not tim.....I'll shut up now)

anyone can help me out with me pc210 skyline 180k?

my car comes with a rear dead axle and thinking to swap with a r30 r200 diff with lsd

when i got the complete rear end and i found out that width is slightly wider

any idea can recommend for me?fabricate a bracket to mount with it etc??

saw the first page looks like got few people managed to mount it lol

hope to get your help asap...

thx in advance

i recently put an R30 rear end in my c210. was a straight swap. the only difference i found was the handbrake cable between the discs is shorter with the r30 rear and the c210 one doesnt go back far enough to meet it.

I don't think you can install a IRS diff into a PC210, being live axle i would assume there'd be no crossmember or mounts for a crossmember for it.

Can you take pictures for us?

ok will take the photo when i am free

but i thought the chassis and undercarriage of pc210 design would be almost the same with sedan c210 (any version)

sad....no enough study before start modifying......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...