Jump to content
SAU Community

Recommended Posts

My mate has a single turbo on a stock 32 gtr engine running over 400kw and ran 10.8

I believe there is no difference if your running -5 at 350kw or a single turbo at 350kw

Same shit

  • Like 1

When your custom manifold and custom single turbo get looked at by the police, and you didn't spend $1000 + on Mod plates and you get a yellow stick for it instead of going sleeper stock look, then all good. Besides ones the OP looked at were cheaper range singles anyway. Not to mention additional costs upon tuning and what not if you were to switch back to twins for a defect..

For circuit and road, definitely low mount twins. But for straight line top end and drags, you can't beat a big single turbo. a 400kw twin -5 setup and a 400kw single 3582 setup are very different. The single turbo give much more punch on boost where as the twins give wider power band

Size of the turbo/s has more to do with a wide or narrow power band than twin vs single configuration

Are people seriously going to argue this single vs twins thing on paper

Too many variables to generalise anything about it

EVOS?? HAHAHA. All GTRS are just SEXY! As for single turbos?? The f**king cars come out twin turbo, keep it twin, single is for tight asses who don't wanna buy two. And if u really want a car? A good one! And u got the cash, I know the man to do it!

  • Like 1

I believe the points I've made here are relevant rather than typical "twin is better than single cos there 2 of em brahh". Only two reasons one goes single turbo on a GTR.. that's if the engine went bang or the turbos themselves went bang. I'm no expert with skylines but i'm fairly sure there's a few kits out there direct aftermarket bolt on twins that don't sit up against the rocker cover. Anyway regarding the OP's first question that car is in doubt not worth flying a state away and back to see it, I mean come on man look at it.. swede / coon / tryhard / top bloke ect not to mention cop magnet and a stock motor with the hefty price tag of $43k.. surprised no one on here can call it not worth it compared to some others for another 3-5k?

They would be the most likely reasons on a r34 GTR skyline worth 40k someone would waste $2-3k on manifold / $2k on a turbo and bother with all other on off bits piping/lines ect.. were not talking a $6k GTST to make it from 200hp to 230.. lol. I do forget a lot of this after market stuff is direct bolt on to rb blocks so I guess that's easy in that respect however your still battling the price tag to justify it on a r34? I don't know about you lot but if I was to change a turbo set up from either stock or aftermarket twins to an aftermarket HUGE single setup I would wage costs. Anyway why bother debating this your a "vic club member" you live in Victoria and we have the harshest road laws in the country. Your a moron if you live in a big city and think you won't get pinged in a skyline for a huge defect and be down at Vicroads getting EPA / underbody inspection and restore your rocket to 'stock' get it cleared again $$$ and then put all your go fast bits back on? Lol.

When your custom manifold and custom single turbo get looked at by the police, and you didn't spend $1000 + on Mod plates and you get a yellow stick for it instead of going sleeper stock look, then all good. Besides ones the OP looked at were cheaper range singles anyway. Not to mention additional costs upon tuning and what not if you were to switch back to twins for a defect..

If your not driving like a cock, and dont talk to them like a cock... They generally dont give 3/5ths of f*ck all if its a single and will pay more attention to the pod filter (NSW COPS ANYWAY)... i know the VIC cops are more KENTS

First hand experiences i assure you, The turbo sits so high that i had to cut some of the reo out to close the bonnet :D

Just as reference, a mod plate wont help you if they want to bend you over proper.

Also Twins Eat a Fat one, .. Just to clear that all up :)

  • Like 3

I believe the points I've made here are relevant rather than typical "twin is better than single cos there 2 of em brahh". Only two reasons one goes single turbo on a GTR.. that's if the engine went bang or the turbos themselves went bang. I'm no expert with skylines but i'm fairly sure there's a few kits out there direct aftermarket bolt on twins that don't sit up against the rocker cover. Anyway regarding the OP's first question that car is in doubt not worth flying a state away and back to see it, I mean come on man look at it.. swede / coon / tryhard / top bloke ect not to mention cop magnet and a stock motor with the hefty price tag of $43k.. surprised no one on here can call it not worth it compared to some others for another 3-5k?

price was negotiated with the one in vic to quite a reasonable price - have a few good mechanic friends up in vic who checked the car out for me all looks good - confirmed that the front has not been in an accident after thoroughly looking at it - still thinking of flying up since all seems well drives well and its stock which is what i initially was looking for - if theres some 3k more then point it my way and ill check it out asap !

lol other then that stil enjoying the single v twin discsussion :)

GTR owners who went from twins to single, never go back to twins. GTR owners who prefer twins over single, never driven or been in a single. However I'd love to have a twin high mount TD06 25G setup :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...