Jump to content
SAU Community

Recommended Posts

Okay thanks mate!!

I'll come down on the 8th to watch and meet people!!

Before I end on hitting the track see how people get ready and how they set everything up!

I don't want to look like a complete rookie :)

Everyone has been there. We'll have an SAU VIC garage so come say hi.

Hey guys,

Just wondering if there has been any decision on the classes you are running for this years championship? With only 5 days before Round 1 it would be good to see who is racing against each other... ;)

We have a good number of cars entered for this round. We want to see how it pans out and make sure that everyone had an opportunity to get involved. So we'll be looking at the classes after the round.

  • 4 weeks later...

The classes look interesting - going from the 2015 championship spreadsheet in the Round1 thread.

Classes did need a bit of a shuffle with a few people being handicapped to only 6pts per round last year due to lack of competition etc.

Understand Rnd 1 was a bit unusual as we had such good numbers guess we'll see out it pans out.

  • 3 weeks later...

Round 3 Broadford is not going ahead at this stage ( but working on a day later in the year).

We are have been discussing other options but its not looking good at the moment.

Hopefully myself or John will have an update next week.

  • Like 1
  • 3 weeks later...
  • 2 months later...

Got my 2015 cams license yesterday, when did they ditch the stickers and move to a card?

Probably because it's easier for dodgy people to print their own fake stickers ? More effort in counterfeiting a physical card, and can have more features added like holographic layers, etc.

I think the cards are cool, your very own FIA-approved credentials :P




  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...