Jump to content
SAU Community

Recommended Posts

Hey guys,

I've entered for the Sunday now as well and looking forward to getting back out at PI and competing in the championship this year.

For those who don't know me yet I've got a VX SS Commodore with an N/A LS1 putting out around 310rwkw and I ran a 1:54.9 last time at PI. :)

  • Like 1

Haven't entered yet but I will at some point.

Anyone else going for the first time?

At the briefing they usually ask if there are any first timers. Just let them know and they'll either do a parade lap at low speed or get an experienced driver to passenger with you on the first session.

Yep PIARC days they group you on times and shuffle groups during the day on times

Didn't think they did at the last one, might depend on how many entries and the time spread?

They might factor in the car class for groupings along with specified time. Both are on the My Car page on www.meecamsau.com. Most people would be E-H?

Motorsport Information

Group 5 Sprint Class 

STANDARD CAR CLASS
Class A - Up to 1600 cc
Class B - 1601 to 2000 cc
Class C - 2001 to 3000 cc
Class D - over 3000 cc

MODIFIED CAR CLASS
Class E - Up to 1600 cc
Class F - 1601 to 2000 cc
Class G - 2001 to 3000 cc
Class H - over 3000 cc

RACING CAR CLASS/SPECIALS
Class I - Closed Racing Cars up to 2500cc 
Class J - Closed Racing Cars 2501cc over
Class K - Open Racing Cars. All Capacities

actually most of entrants would be in A-D

E-H are those with engine swaps, stripped down with aero work...think richo's skyline.

http://www.piarc.com.au/files/Feb%202015%20Sprint%20Regs.pdf

Classes A, B, C & D are for road-registered cars using generally road-going equipment only. All cars using racing
tyres, or slicks, will be classified as specials, as will be excessively modified road cars. The organisers reserve the
right to re-classify cars, following vehicle scrutiny. For full details of modifications allowed in each class see Group 5
Speed Event regulations. The organisers reserve the right to amalgamate classes if in their opinion entries are
insufficient to warrant a separate class.

actually most of entrants would be in A-D

E-H are those with engine swaps, stripped down with aero work...think richo's skyline.

http://www.piarc.com.au/files/Feb%202015%20Sprint%20Regs.pdf

Classes A, B, C & D are for road-registered cars using generally road-going equipment only. All cars using racing
tyres, or slicks, will be classified as specials, as will be excessively modified road cars. The organisers reserve the
right to re-classify cars, following vehicle scrutiny. For full details of modifications allowed in each class see Group 5
Speed Event regulations. The organisers reserve the right to amalgamate classes if in their opinion entries are
insufficient to warrant a separate class.

I'm in Class H with my car when I compete at PIARC events...

Anyone that is entered and/or spectating - Please post up to confirm you are coming.

Also if you are doing a single day OR the two days (there is Prac on Sat some are attending).

I need to know for catering purposes for lunch of Steaks/Skewers and the like over the two days.

Thanks in advance!

Anyone that is entered and/or spectating - Please post up to confirm you are coming.

Also if you are doing a single day OR the two days (there is Prac on Sat some are attending).

I need to know for catering purposes for lunch of Steaks/Skewers and the like over the two days.

Thanks in advance!

In for proteins

Just racing on Sunday

Anyone that is entered and/or spectating - Please post up to confirm you are coming.

Also if you are doing a single day OR the two days (there is Prac on Sat some are attending).

I need to know for catering purposes for lunch of Steaks/Skewers and the like over the two days.

Thanks in advance!

Robyn and I will be there on Sunday for sure, steak will be needed :P

Haven't entered yet but I will at some point.

At the briefing they usually ask if there are any first timers. Just let them know and they'll either do a parade lap at low speed or get an experienced driver to passenger with you on the first session.

Didn't think they did at the last one, might depend on how many entries and the time spread?

They might factor in the car class for groupings along with specified time. Both are on the My Car page on www.meecamsau.com. Most people would be E-H?

Motorsport Information

Group 5 Sprint Class 

STANDARD CAR CLASS
Class A - Up to 1600 cc
Class B - 1601 to 2000 cc
Class C - 2001 to 3000 cc
Class D - over 3000 cc

MODIFIED CAR CLASS
Class E - Up to 1600 cc
Class F - 1601 to 2000 cc
Class G - 2001 to 3000 cc
Class H - over 3000 cc

RACING CAR CLASS/SPECIALS
Class I - Closed Racing Cars up to 2500cc 
Class J - Closed Racing Cars 2501cc over
Class K - Open Racing Cars. All Capacities

I just put down Modern 2WD for the meeca site lol.

f**ked if I know TBH... I just put down the laptimes section though, I think that would hold far more relevance.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...