Jump to content
SAU Community

Recommended Posts

I had always wanted a standard looking clean interior. I believe now i am well on my way to achieving that.

Randomly on FB a woodgrain stagea wheel popped on my newsfeed so i snapped it up straight away. I still need a gearboot and an mp3 player that looks standard. I will change the led's to match the climate control.

I made a glovebox cluster out of redgum to hold my gauges and safc neo.

First was to make a template out of cardboard.

IMG_4488.jpg

Then i clean dressed the redgum to let it air for a month, this was done to limit it's moisture content and it will have less chance of expanding and contracting with the different seasons.

IMG_4522.jpg

I then deep ripped it on a bandsaw and cut out the template, i let it dry for another month.

IMG_4542.jpg

I used an edge router with a 45deg ball bearing tip to get the perfect angle.

IMG_4549.jpg

I used a 48mm holesaw to get the gauge holes and then used a bobbin sander to achieve a tight fit for the gauges. The safc neo hole was achieved by a 10mm drill bit, jogsaw and a hand file.

IMG_4550.jpg

I then used a stain and a satin oil finish, each time i stained and oiled i sanded in between, there are 6 coats

IMG_4553.jpg

I am not too happy with the finished product as i rushed some parts and steps. This is it all in, excuse the mess.

image.jpg

IMG_4773.jpg

IMG_4772.jpg

I attended the ACT's first all japanese car show hosted by REACT.

I met cpark, sin and a few others there and was a great start to my birthday!

stagea.jpg

IMG_4727.jpg

Stagea%20c34.jpg

IMG_4574.jpg

IMG_4577.jpg

  • Like 1

Really digging the wood highlights, Ive got a few woodgrain interior pieces around somewhere...but not enough for a full set. I have a RWD woodgrain piece for the centre console, but it doesn't fit a 4WD model. I assume your centre console is also not off a 4WD S1 stagea?

Thanks tofu, redline and zoom.

The glovebox is a funny thing. Nissan didn't think i would notice that the latch hump is offset 5mm to the right and the sides taper inwards at the top.
After seeing HKS and freeway Dolphins glovebox consoles I knew I had to make one.

I'm very lucky my boss is a great guy and let's me make my own stuff on the weekends.

Really digging the wood highlights, Ive got a few woodgrain interior pieces around somewhere...but not enough for a full set. I have a RWD woodgrain piece for the centre console, but it doesn't fit a 4WD model. I assume your centre console is also not off a 4WD S1 stagea?

All my woodgrain pieces are from the s2 Stagea that's why the centre console needs a boot to cover the gap.

You should check out ebay and yahoo auctions, plenty of random wood bits out there for decent prices. I got lucky with my stuff, but I was always searching for the right pieces for the right price.

  • 3 months later...

New regu 06&r muffler, this took a bit of work to get it to sit where it is. I now know why Stagea muffler tips are always 200mm long.

Stitched a shift boot.

And went nuts on Stagea magazines.

Purchased an innovate lc2 wideband and will probably have to make another glovebox console for a change of plans.

Benny I haven't forgotten about the cargo blind ;) I just get sidetracked very easily.

post-108100-14407363591335.thumb.jpg.8201cbddbc57beab86f34a1a41d8d1e9.jpg

post-108100-14407365876637.thumb.jpg.379d7ba724bf58530a79fc09f2b383db.jpg

post-108100-14407366500942.thumb.jpg.b8f0041a38745d5d45936fede3bc3f69.jpg

post-108100-14407366868673.thumb.jpg.56453702bc85bf2a25d83a8c7f121c83.jpg

  • 4 weeks later...
  • 1 month later...
  • 2 months later...

Been prepping for track days recently so first up was brakes.

Setup consists of; R33 gtst calipers - DBA 4000 T3 rotors F+R - Remsa/Roadhouse pads F+R - TRW GP600 fluid - Nismo braided lines front - APP braided lines rear

Huge thanks to Luke, Joe, raj, and Kyle for the brakes.

Got a new helmet. Very cheap, comfy and sa2010 complied.

Put in some whiteline rear upper arms thanks to grant and caster arms with whiteline bushes thanks to Ben.

post-108100-14553307891946.thumb.jpg.48fa97d80e9595f487b146cc37bd5be3.jpg

post-108100-14553308106364.thumb.jpg.9688b75e744cfc9b8b6711d88f4c3b31.jpg

post-108100-14553308351971.thumb.jpg.6fb2a387158bf400f1070ed22d3181ed.jpg

post-108100-14553315599032.thumb.jpg.c5f6ca0643e24e14d3d0e516cccfbfcf.jpg

how does the new kakimoto muffler sound? does it have the silencer in it?

It's ok once warm but terrible when cold. No silencer, using a trust mid muffler too.

Honestly I can't tell you exactly how it sounds as I've never heard it outside the cabin.

  • 2 weeks later...
  • 10 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...