Jump to content
SAU Community

Recommended Posts

hi i tried searching but found no usefull results.i want to know if anyone has put an rb20 wastegate on their rb25 turbo. has there been problems? was it easy/hard? is it neccessary to do other mods? currently all i have is 3inch cat back. i want to do this mod because i want my car to appear stock. thanks guys

Link to comment
https://www.sau.com.au/forums/topic/453518-rb20-wastegate-on-rb25/
Share on other sites

.i want to know if anyone has put an rb20 wastegate on their rb25 turbo.

thing is though son, I know it sounds like, oh wow I'd be able to boost like, all the way up to 10 psi....but I found it made point-oh-shite all of difference and unless you get one for 10 bucks, not worth chasing down.

I would suggest the adjustable kinugawa wastegate with the low-pressure spring, that will bolt on, give more responsive boost as well as some degree of adjustable boost control. They're only $100-something off ebay new.

Yeah I dropped one on my neo because my actuator couldn't hold shit anymore.

As said not really worth the effort unless you score it for next to nothing.

Not gunna suddenly make the car a powerhouse over a couple of psi.

ok cool ill check that out

Be aware that you can't run more than about 12 psi on a stock RB25 ECU without it cracking the shits at you. After that (actually really, after about 10 psi) you are into the need to tune/swap* ECU area already.

*swap on R33, tune (via Nistune) on R34, or swap.

No.

The car will feel better with 10 psi than it will with 7 psi and a dump added.

But it's not as if it's an either-or sort of thing. A good dump pipe is almost an essential upgrade. The increased internal volume and better flow of the dump (whether drainpipe type or a good long split) will speed up the building of boost and make the car feel stronger even without adding any extra boost. And it will usually also add some extra boost on its own as well, just from reduced restriction. Given the price (a few hundred), it's pretty much a forgone conclusion that you should have one.

And naturally, you should always run any (stockish) turbo car at the highest boost you can (within the limits of the various support systems) so as to maximise benefit of having a turbo. So a boost control upgrade is also a near-compulsory thing. And it's also only a low amount of money (between $20 and $500 for your typical options).

Just do it (both).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...