Jump to content
SAU Community

Recommended Posts

I'm sure a mate would do it for a slab of beer. Some bloke does them on here for $100 exchange.

It most Definately does make a difference. Plenty of info on the net about it.

While we are on the topic of exhausts. I've got hks gt-ss (-9's) turbos going in atm with hks dumps.

before you go any further get rid of the HKS dump pipes and go to an open belmouth design, due to the design of the hks pipes they are a pretty major retraction

Yeah I have read the topics relating to the mod, makes sense why it works so well. Anyone in Melbourne?

It was a very stupid design from Nissan. A little bit more thought would have gone a long way, but I Spose it worked well for it's intended purpose of 300 hp - give or take.

If you want response and internal gate then maybe a EFR8374 might be the "right" answer?!?

I know that my 6262 is better down low and up top that -5s so the EFR8374 should be even better with response and also be able to make more power than the low mounts.

For reference here is a 6262 vs -5s with similar specs on same dyno (6262 running more boost)

received_10153635513684616_zpsybzyo0oc.j

I see that the new turbo tech is good but some people have a budget want around the 400kw mark and do not want to change front pip manifold, dump pipe, intercooler pipes, Intercooler and BOV.

You still can get good results and more than enough power and response with -5's without having to change to a single turbo.

that is what i honestly think and achieved with my build.

Edited by Stixbnr32

If you want response and internal gate then maybe a EFR8374 might be the "right" answer?!?

I know that my 6262 is better down low and up top that -5s so the EFR8374 should be even better with response and also be able to make more power than the low mounts.

For reference here is a 6262 vs -5s with similar specs on same dyno (6262 running more boost)

received_10153635513684616_zpsybzyo0oc.j

See this makes me sick in the pit of my stomach :) I love my singles, but the other day I was even pulled over in my daily BMW so the plan for the R32 is get it engineered with an RB26 and low mount twins. :( All so I can continue to enjoy it as a fun club-street car for years to come...and be slower. :(

If you want response and internal gate then maybe a EFR8374 might be the "right" answer?!?

I know that my 6262 is better down low and up top that -5s so the EFR8374 should be even better with response and also be able to make more power than the low mounts.

For reference here is a 6262 vs -5s with similar specs on same dyno (6262 running more boost)

received_10153635513684616_zpsybzyo0oc.j

Well, from Matty James-Wallace' back to back between the -5's and the internal gate 8374 it's night and day. Comes on 5-700 rpm earlier than the -5's. I'd believe it too after having the pleasure of experiencing a GTR with an EFR on it too.

Well, from Matty James-Wallace' back to back between the -5's and the internal gate 8374 it's night and day. Comes on 5-700 rpm earlier than the -5's. I'd believe it too after having the pleasure of experiencing a GTR with an EFR on it too.

Yeah I've been in Matt's car and it's impressive. Hard to judge being a 3.0L vs my 2.6L, actually next time I'm at the dyno I'll try and grab and overlay.

My expectation is a EFR8474 would be a few hundred rpm earlier than mine any only miss out on a little bit top end on same capacity motor.

Edited by SimonR32

Yeah I've been in Matt's car and it's impressive. Hard to judge being a 3.0L vs my 2.6L, actually next time I'm at the dyno I'll try and grab and overlay.

My expectation is a EFR834 would be a few hundred rpm earlier than mine any only miss out on a little bit top end on same capacity motor.

That would be good for an overlay.

Interesting you say that about the top end. The 8374 has 62.6 mm inducer and 83 mm exducer compared to the 6262 of 62 mm in and 82 ex. I realize its a bit more complicated than that but food for thought as thr EFR is has a bigger front fan on both accounts.

The right sized single could certainly come on earlier than twins because you have 6cyls driving one medium exhaust exhaust wheel. On twins you effectively cut the engine in half to drive two smallish to medium exhaust wheels, this is what drives the lag profile.

Also before you go and buy random parts talk to a workshop in person and give them the problem statement. This might save you a few $k in parts only to find it does nothing to shift the boost profile where you expect it, ie I think you expect a 600rpm+ shift in boost profile from those parts, I'm not convinced they would get anywhere near that amount of change in response.

Well, from Matty James-Wallace' back to back between the -5's and the internal gate 8374 it's night and day. Comes on 5-700 rpm earlier than the -5's. I'd believe it too after having the pleasure of experiencing a GTR with an EFR on it too.

Would be curious as to where GTX2860/63s (modified for OEM fitment) fit in the mix.

They should be an improvement over normal -5s, but enough to give the EFR8374 a run for it's money? Maybe not.

Would be curious as to where GTX2860/63s (modified for OEM fitment) fit in the mix.

They should be an improvement over normal -5s, but enough to give the EFR8374 a run for it's money? Maybe not.

Issue is, who i going to do the back to back. Its alot of coin tied up in all those parts :(.

If only a company makes some steam pipe manifolds... everyone makes that stainless balla manifolds that only a few can afford...

If like to see either EFR6758s or PTE5130s as a true bolton for the RB26 so the small twins can enjoy some of the tech the big singles have been getting :(

If only a company makes some steam pipe manifolds... everyone makes that stainless balla manifolds that only a few can afford...

Manifolds are a drop in the ocean really.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...