Jump to content
SAU Community

Recommended Posts

Didn't occur to you once, with all the car around you adjusting pressures all morning...?

Pressures are for fancy people anyway.

Lol by that logic he should've lost in on turn 2(or was it 3?) and required towing home :P

My highest trap was 156.5km

That was in the second run on this with a time of 35.49

In the first run i had a slight moment coming out if turn two :/

I thought i should check tyre pressures on sunday and the rears where at 23psi and front at 25psi :(

The ford guys where kind enough to loan me a pump :thumbsup:

  • Like 1

Yeah still left alone from RTDC day, my bad, really should have checked it before hand :/

I play to win :D

And while im here

attachicon.gifimage.jpg

attachicon.gifimage.jpg

Looks like a proper beast, all hunkered down in the corner!

Great results guys! Not sure if it's the different perspective XKLABA, but the way you lined up and powered through the second chicane was the smoothest I've seen!

Great photos Ciaron. Here are a few of mine, between too much sun, too much shade, too many inanimate twigs, and a fk load of editing, this was the best i could do.

20150329-DSC_0296.jpg

20150329-DSC_0261.jpg

20150329-DSC_0268.jpg

20150329-DSC_0403.jpg

20150329-DSC_0460.jpg

20150329-DSC_0461.jpg

20150329-DSC_0459.jpg

20150329-DSC_0466.jpg

  • Like 2

For us who weren't able to come along, your pics Ciaron and Mathew are a delight thanks!

To further that Terry I'll upload all the other photos, some very nice and interesting cars there!, in the next week.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...