Jump to content
SAU Community

Recommended Posts

haha, thanks

Hope I do not get too bored too soon, well the builder should get bored before me, he had it longer :)

When you get bored just put a bigger turbo on it. Response gets boring quickly.

I will look out for your next thread, titled ' I love my car BUT its missing something' ha ha

I think you should relocate that number plate just quietly.

And I hope you don't have another misfire. That would be beyond a joke

I like it there, no obstruction for the air and you do not have to bend it at each end to go into the original position , a lot of Plates look like they have been nailed on, see great looking Rs and shitty plate positions and conditions ?

Not worried if it is missing again, I am not going back to Sydney and I am sure I will find someone closer and go from there.

Shit mate if everything worked the thread would closed and my life as I know it is over :(

When you get bored just put a bigger turbo on it. Response gets boring quickly.

I will look out for your next thread, titled ' I love my car BUT its missing something' ha ha

Just watch this spot mate, I might have to steal your name for the thread :)

I never got sick of a car with response and have been loving response for over 55 years, but it took about 2 klm to hate lag and want to sell the car.

Big turbos are exciting and I am sure my car would be great with a big modern turbo, that is, if I could ever use it :/

Each to his own mate, just got to love cars and driving them :cheers:

Old wives tale........ You can always use it..... He he ....... Always. :D

haha, but getting it up to 7k and dropping it at the lights or out of Woolies car park is not a good look, fun no doubt but is frowned upon by the boys in blue :)

Where is the RPM on that Graph?

Is it 300kw just under 4000rpm?

Max torque is extremely early - beauty of 3.2L ay.

I want to compare my graph - same power just .6 of a L down.

Edited by Stixbnr32

haha, but getting it up to 7k and dropping it at the lights or out of Woolies car park is not a good look, fun no doubt but is frowned upon by the boys in blue :)

Mmmmmm, some falsely say it is the case. Never had to do it myself. I think people talk a lot of shit really, or just don't know how to drive.

Where is the RPM on that Graph?

Is it 300kw just under 4000rpm?

Max torque is extremely early - beauty of 3.2L ay.

I want to compare my graph - same power just .6 of a L down.

The next tune I have done will have RPM and you will bet a comparison , I find these Dynos without the rpm to be a pain. I will try and have the few things I need done ASAP and it should be interesting to see if they can do more with the tune and cam dialing ?

Is there anyone reading this that can put the revs to the KPH.

Paul was saying that I have lost 5.2KW but at 18.5psi not 22psi on the last tune , as you can see the psi drops off from 24psi @ 351kw and makes full power @ 18.5psi of 381.7KW, so I guess it really did not loose anything with the new dump ??

Stuffed if I know how it works :/

The next tune I have done will have RPM and you will bet a comparison , I find these Dynos without the rpm to be a pain. I will try and have the few things I need done ASAP and it should be interesting to see if they can do more with the tune and cam dialing ?

Is there anyone reading this that can put the revs to the KPH.

Paul was saying that I have lost 5.2KW but at 18.5psi not 22psi on the last tune , as you can see the psi drops off from 24psi @ 351kw and makes full power @ 18.5psi of 381.7KW, so I guess it really did not loose anything with the new dump ??

Stuffed if I know how it works :/

Looks like your making the same power with less boost. That's a result of a better dump (good thing)!

Also what Hadouken is saying may also be true, the spark could be blowing out which is why there is now less boost.

If this is the case there's an easy solution to this problem.. It's just more $$$

Mmmmmm, some falsely say it is the case. Never had to do it myself. I think people talk a lot of shit really, or just don't know how to drive.

You might be right about the driver , me :)

I had a T78 so not a new age turbo but it was hideous as a DD , but I guess we all have our own idea of lag for a STREET CAR, " not track or hill climb." as I know shit all about this type of driving, but I know once the revs are up they are great.

Turbo is too small. Turbine housing too small which restricts flow and chokes the engine. In this scenario you have no choice but to cut boost.

It will be interesting to see what an e85 tune does because if it makes no significant difference then the turbo selection is the problem.

  • Like 1

Looks like your making the same power with less boost. That's a result of a better dump (good thing)!

Also what Hadouken is saying may also be true, the spark could be blowing out which is why there is now less boost.

If this is the case there's an easy solution to this problem.. It's just more $$$

New coil pack ?

The next tune I have done will have RPM and you will bet a comparison , I find these Dynos without the rpm to be a pain. I will try and have the few things I need done ASAP and it should be interesting to see if they can do more with the tune and cam dialing ?

Is there anyone reading this that can put the revs to the KPH.

Paul was saying that I have lost 5.2KW but at 18.5psi not 22psi on the last tune , as you can see the psi drops off from 24psi @ 351kw and makes full power @ 18.5psi of 381.7KW, so I guess it really did not loose anything with the new dump ??

Stuffed if I know how it works :/

Interesting that the boost tapers of so much, would be alot better if it could hold.

What wastegate and what boost controller peter?

Turbo is too small. Turbine housing too small which restricts flow and chokes the engine. In this scenario you have no choice but to cut boost.

It will be interesting to see what an e85 tune does because if it makes no significant difference then the turbo selection is the problem.

He said he cut the boost , but I do not understand that as the last tune was 22psi and this was at 24psi to kick off and dropped off to 18.5 psi?

I put the PT6262 CEA Turbo on it as a 2.6l, left it there to see how it goes.

Personally I do not care what E85 does , I cannot buy it here, just like having the option and would love to feel the difference from pump .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...