Jump to content
SAU Community

Recommended Posts

Fuel pump I installed previously was too big for the tank. Shaved off some of the some of the plastic teeth so itll fit in but it was touching the tank n due to vibrations it hums really loud.

So asking them to take it out and shave it off completely and ditch the rubber piece and use a vice to clamp it all together.

Or just f**king get rid of the humming lol

This job just got a lot more complicated. Turns out previous owner put a gtr fuel pump in the car, which is a lot larger and to fit it they removed the sender. So now Mark has to remove the pump and put a walbro pump in to fit the sender, the bill is roughly ~$500 now.

The plus side of this is I can run bigger injectors and higher boost down the line.

Edited by Manne

This job just got a lot more complicated. Turns out previous owner put a gtr fuel pump in the car, which is a lot larger and to fit it they removed the sender. So now Mark has to remove the pump and put a walbro pump in to fit the sender, the bill is roughly ~$500 now.

The plus side of this is I can run bigger injectors and higher boost a big single down the line.

FYP

Fuel pump I installed previously was too big for the tank. Shaved off some of the some of the plastic teeth so itll fit in but it was touching the tank n due to vibrations it hums really loud.

So asking them to take it out and shave it off completely and ditch the rubber piece and use a vice to clamp it all together.

Or just f**king get rid of the humming lol

Bigger exhaust or stereo will also fix the humming

  • Like 1

Bigger exhaust or stereo will also fix the humming

My stereo is mighty loud, exhaust is loud enough for me too....stupid pump is making me think I need a louder exhaust now....but less than $50 vs $2k.....I'd rather choose the $50 option...

Been seeing a few GTT 34 around my area lately....still really want one T_T.....ageing car though

  • Like 1

Ok got Tue car back. Mark from C-red is such a top bloke. We sat down and discussed the car for 30mins going over everything, he estimates 6-8k worth of work already done to the motor. We discussed where to go next and budgets too. very good and friendly service. They out a walbro 400 in and charges for a 202?, as that's all he could get his hands on.

Splitfires, Custom Piping, Oil Filter relocation, Re-build, Candy Apple Red Spray job ;) and some other things I can't remember.

Edit: Memory kicked in - Front Mount intercooler and a bleed valve as well. (theres a couple things he noticed which I did not and I can't remember them)

Edited by Manne
  • Like 1

Morning all

Who uses tapatalk or sau app (Samsung) on their mobs.

Im using the sau app and i like it easy to use, user friendly but i find when i use the http: of sau on laptop it still has more features like if you make a topic it say how many views i get im thinking about taptalk only coz if i wanted to look at antilag.com and other forums that what they want you to use.

Whats your feed back worth trying?




  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...