Jump to content
SAU Community

Recommended Posts

Well after all the heartbreaks and false promises I am not sure we will want you along ...

Just kidding mate!!!

Glad to hear you can make this one :)

Make sure to warm up the car!

And looking forward to catching up ;)

What you say!? I still cool!!! You see me there!!! =P

Lol!!! And don't hate on me because I live that forged life.....

  • Like 1

This will decimate all stomaches, after we put about 15 beers into it. If we have to, overnight hommus from... Lakemba :P

Raj don't do it!!! I bet he has over 100 kafta under that hood!!!
  • Like 1

This will decimate all stomaches, after we put about 15 beers into it. If we have to, overnight hommus from... Lakemba :P

I need one of these, one of the big ones. Actually make it two. And Sammi... I need it by tonight.

  • Like 2

oh ffs the biggest cruise in ages and i can't make it

aarrrgggghhhhhhhhhhhhh

not like i have the blue meanie anymore anyway sigh

also if you guys have to take swamp road - jamberoo, be a bit careful; last run it was pretty bumpy and it seems like there's a fair few nice cars going.

  • Like 1

So do you guys and girls want the good news, or the bad news??

Well, THERES IS NO BAD NEWS!!!!!! I can make this one!!!!!! (Finally!!!!!! Lol)

is it at operating temp yet?



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...