Jump to content
SAU Community

Recommended Posts

Know those feels Odi

My boss has been out of character, overly nice to me for most of last week and especially today - am slightly paranoid that he's gotten wind of me considering other options or complaining about my working conditions to co workers - which, don't get me wrong, I do on purpose with all intention and knowledge it will eventually reach him.

For a male dominated workplace (management 100% male, only females are admin/data) we have an incredibly gossipy culture. Then again, he knows about this car club so could be reading these forums too. Hi mate!

I think it's the smartest way to handle stuff as an employee, even if it's a bit underhanded. Telling people straight is difficult when you don't know where you stand with the company, replaceable or not - gives them a chance to find someone else and make you replaceable. At least this way you can stay where you are and see no real repercussions if you don't venture elsewhere, because in the end their source is only workplace gossip. If anything, you might see a potential payrise to keep you happy if they do need you.

What sort of role you interview for Simon? I left my last role after 4 months, was no structure with the work we got and severely understaffed got a better offer closer to home - no brainer.

Level 1 Tech at a Managed IT Services Company... effectively outsourced IT Department... Not totally sure it's what I want, I don't do amazing things under pressure, so having 100% chargeable hours may not be the best fit for me. Additionally they work with a lot of technologies which I've never touched in my current role so I can't claim to be an expert in them.

But at least its got room for career progression.

I'll see how my current job goes for a while, it'll either quickly get better or quickly get worse now that these steps have been taken.

Level 1 Tech at a Managed IT Services Company... effectively outsourced IT Department... Not totally sure it's what I want, I don't do amazing things under pressure, so having 100% chargeable hours may not be the best fit for me. Additionally they work with a lot of technologies which I've never touched in my current role so I can't claim to be an expert in them.

But at least its got room for career progression.

I'll see how my current job goes for a while, it'll either quickly get better or quickly get worse now that these steps have been taken.

Ah yeah, the one I left was a MSP don't worry too much about chargeable hours as long as you make them money they don't care from my experience (probably charging clients at like $200 a hour for your work)

I went to another MSP (started last week) seems like they have more structure and reasonable workload. I think they're looking for another guy soon.. so i'll keep you posted.

Edit: Was also bought on as a lvl 2/3 tech at my last role but realistically was lvl 1-3 doing all, what ever flew in you delt with basically, you'll definitely learn a lot at a MSP

Edited by UNR33L

Know those feels Odi

My boss has been out of character, overly nice to me for most of last week and especially today - am slightly paranoid that he's gotten wind of me considering other options or complaining about my working conditions to co workers - which, don't get me wrong, I do on purpose with all intention and knowledge it will eventually reach him.

For a male dominated workplace (management 100% male, only females are admin/data) we have an incredibly gossipy culture. Then again, he knows about this car club so could be reading these forums too. Hi mate!

I think it's the smartest way to handle stuff as an employee, even if it's a bit underhanded. Telling people straight is difficult when you don't know where you stand with the company, replaceable or not - gives them a chance to find someone else and make you replaceable. At least this way you can stay where you are and see no real repercussions if you don't venture elsewhere, because in the end their source is only workplace gossip. If anything, you might see a potential payrise to keep you happy if they do need you.

Repercussions can be leaders not assigning you any high-profile projects, parking any upcoming promotions & placing you in auto-pilot until you hand in a letter.

Becomes quite bad if a job offer doesn't follow through because you've now been labelled as a flight-risk.

Everyone thinks that a passive-aggressive threat of moving on provides some form of leverage. Sadly, majority of the time, leverage only comes once you're holding another job offer.

However once you've received an offer, its most likely too late to be persuaded to stay because the dissatisfaction tends to be more than just low-pay.

Don't play games until you have an offer in hand because the ball is in their court until then.

I think the way around this, is to continually search jobs whilst you are still happy in your current workplace. That way if you progress through any interviews & come up with offers, you could leverage more money from current employee whilst still enjoying the environment.

People tend to start looking once they're dissatisfied by multiple issues & tend to accept the new role regardless if the current company matches pay.

  • Like 1

Unless you're certain of your worth to the company or the job has demotivated you to the point of not caring if you lose it or not...

I don't believe that no positive can come from the passive aggression as long as they don't know you're doing it on purpose and simply discover you're dissatisfied - case in point, Simon.

Sometimes it's the catalyst you need to get things happening when you feel stuck in a rut.

I should point out too that my company has no HR personnel.

I think your best bet if unhappy go to the source / boss gossiping and stuff makes for bad culture and undermines people.

Without knowing all the facts I'm sure your gripes are legitimate but better results come from being direct I think

I think your best bet if unhappy go to the source / boss gossiping and stuff makes for bad culture and undermines people.

Without knowing all the facts I'm sure your gripes are legitimate but better results come from being direct I think

Did this before, basically got told if someone higher up left and I wanted to go in their role he wouldn't put me in it anyway (after almost 3 years service). Bang, that was the answer I needed within a month got another role and handed in my notice.

  • Like 1

Unless you're certain of your worth to the company or the job has demotivated you to the point of not caring if you lose it or not...

I don't believe that no positive can come from the passive aggression as long as they don't know you're doing it on purpose and simply discover you're dissatisfied - case in point, Simon.

Sometimes it's the catalyst you need to get things happening when you feel stuck in a rut.

I should point out too that my company has no HR personnel.

from my experience I've never seen someone turn from demotivated to motivated through an over-due pay rise.

Once you've reached the point of demotivation I feel there isn't any turning back other than a role-change/new boss.

  • Like 1

Yeah Birds I reckon just find a job elsewhere if de-motivated, easier said than done I know but possible and will solve your problem.

Looking back at it I hate that I stayed so long at the other joint when I was unhappy, it basically took my boss telling me to my face (essentially) that I'm staying where I am.

Edited by UNR33L

Yeah Birds I reckon just find a job elsewhere if de-motivated, easier said than done I know but possible and will solve your problem.

Looking back at it I hate that I stayed so long at the other joint when I was unhappy, it basically took my boss telling me to my face (essentially) that I'm staying where I am.

Better than the boss stringing you along with promises of promotions only to offer the position to someone else.

At least you had a direct answer & could cut-ties & move on.

  • Like 1

I think your best bet if unhappy go to the source / boss gossiping and stuff makes for bad culture and undermines people.

Without knowing all the facts I'm sure your gripes are legitimate but better results come from being direct I think

Shitty boss also makes for bad culture and undermines people! Also when your boss is a problem but is too arrogant too ever think that he could be...or be convinced of it...going directly to the source can sometimes do you more harm than good. Obviously differs from situation to situation, but the whole reason we have HR departments is for a buffer between employee and employer. It's a formalised version of the office gossip.

from my experience I've never seen someone turn from demotivated to motivated through an over-due pay rise.

Once you've reached the point of demotivation I feel there isn't any turning back other than a role-change/new boss.

I agree with this for most cases where there is an underlying issue (boredom with tasks, crappy boss etc., though money can be a good compensator in the short term or until times change), but what about cases where pay and pay rises are actually the cause of the demotivation?

Yeah Birds I reckon just find a job elsewhere if de-motivated, easier said than done I know but possible and will solve your problem.

Looking back at it I hate that I stayed so long at the other joint when I was unhappy, it basically took my boss telling me to my face (essentially) that I'm staying where I am.

I am on the lookout for anything appealing and have updated CV and all that, but a decent enough payrise I think would reinvigorate spirit in working where I am for now. We have pay reviews soon, so there is no better time to be picking up potential offers from other places.

Patrick isn't totally wrong though, if my boss was as nice all the time as he has been recently, that would almost be enough to remotivate on its own. I swear he is bipolar and the therefore bipolar nature of working for him makes it difficult to enact change - it's an excellent company and not really a position I want to give up (tough to get marketing gigs in multinationals), but I can't stand the shit I cop from him forever either!

I should also point out here that everyone complains about my boss (including his boss), but not everyone works directly under him, so they have the benefit of escaping / avoiding it.

Think the boss is a bit scared that I'm about to walk out the door (the day before he leaves for a 6 week trip, and I'm the only IT guy... who custom wrote the entire Distributor Ordering System that runs the company)...

And I know it's not a massive roadblock if they do want to get rid of me, but also $20+k worth of AL & LSL (hit 10 years last month) to be paid out on the final day...

My issue now, they're suddenly concerned that if I do leave they have no continuation plan... don't even have anyone here who knows what skills the IT Manager requires, so.... I've. Just. Been. Asked. To. Write. A. Job. Ad. For. My. Own. Position.

uw0tm8

  • Like 1

Fkn lol

Unless he's playing mind games with you...

Sounds more like he wants a definitive answer whether you're planning on staying or going, in the form of you writing or not writing a letter haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...