Jump to content
SAU Community

Recommended Posts

SO the way I read this is that you are most likely to be placed in a remote community for 2 years....this is not going to be teaching at your local high school.

Dunno, apparently it's any high schools with poor results to help try and boost them up.. so could be anywhere but I doubt they'd offer you a high school in woop woop there was no mention of that in the presentation thing she attended at melb uni apparently they do some training at Deakin once a week or something though.

That's the thing, this program is funded by department of education - basically yeah onboard any degrees (science, art students etc but NO teaching degrees) then after 2 years they get a masters of teaching (high school)

So yeah, no prerequisite degree to teach apart from what ever other degree you completed.

Edit: few months ago no, she didn't want to be a science teacher but now apparently she does lol

She always wanted to go into research, but yeah guess that's pretty hard to get into.

Another version of this has always been around. You can do, for example, a psychology degree and if you don't pursue a career in psychology you can do a graduate diploma in teaching (1.5 years or so) and then teach psychology at high school. It was on the cards for me before I went into marketing.

Another version of this has always been around. You can do, for example, a psychology degree and if you don't pursue a career in psychology you can do a graduate diploma in teaching (1.5 years or so) and then teach psychology at high school. It was on the cards for me before I went into marketing.

the diff here is that you are getting paid to do the job whilst learning it.

not just spending another couple years at uni.

so much more attractive to some.

Another version of this has always been around. You can do, for example, a psychology degree and if you don't pursue a career in psychology you can do a graduate diploma in teaching (1.5 years or so) and then teach psychology at high school. It was on the cards for me before I went into marketing.

Big difference if you're getting paid and not paying uni!

But yeah basically a fast tracked career change

http://www.teachforaustralia.org/

Well it's not really throwing away 3 years of your life, those 3 years basically qualified you to go into a school and teach (same as a actual teaching degree I guess?) / do this and get paid basically graduate teacher wages or paraprofessional what ever they call it.. after 2 years they'll probably onboard you and put you up to what ever teachers get paid - 60k? no idea, probably depends what you're teaching I guess

3-5 years study to earn $60k~ isn't ideal..

3-5 years study to earn $60k~ isn't ideal..

better than 3-4 years to earn $0 I suppose (cos art, science etc.)

apparently you can put in preference of school areas when you apply and its all metro/regional if they participate in it

Edited by UNR33L

Whats the job availability and pay like for researchers? I assume not much out there

there are jobs, most have specific skill sets. So at a minimum for a decent research position you would want/need honours or masters or tie it to a PhD study.

Research assistant is starting point and you need to have something to say you're experienced in its area of study or else why would they pick you? $40-65k depending on field, location, responsibility, lab level etc.

Head of lab or head of a program or something pays better, you'd need some solid experience (multiple years studying/researching area of expertise)

Top dog is you somehow become a national/world leader in development/study of your field. Pay is pretty good, usually based at a university. get flown round the world for conferences, get on TV for 20sec interview if you're special or make a break-through etc.

Problem is most research contracts are 6-12months. so much depends on funding. a lot of maternity leave contracts, but then back to square one when you're done.

My mrs wants to get back into research and has been looking for a job in melb for almost 12 months. A bit around in Sydney. My sister went into genetics instead, specifically IVF. Science degree, 2 diplomas and $75,00 in HECS later and shes doing alright. Not a huge selection of places to work, but once you've got your foot in the door... (pretty much sums up science)

...or do what 70% of science students do: become a lecturer, teacher, lab tech or assistant in a different field (petrochem, food, medical testing etc)

3-5 years study to earn $60k~ isn't ideal..

60 K doesn't meet the starting salary for a teacher...and they go up pretty quickly.

http://www.education.vic.gov.au/hrweb/Documents/Salary-Teacher.pdf

in my books 64K is a pretty good starting salary for a anyone.

and for teaching pick up some things like a home room teacher, or such and there extras on top of this.

Mate been a teacher for around 10 years and into the 6 figures so it doable.

this course your not a qualified teacher tho so it's a 45Kish start salary

still better than doing a dip ed earning nothing in same time.

http://www.education.vic.gov.au/hrweb/Documents/Salary-Paraprofessional.pdf

I literally can not think of anything at all I would like to do less.

wont be that bad, its not like ill lock you in a cage.

oh wait...

Stance will keep on her pants

Stance will make him prance

Stance still won't give Mohsen a chance

what was i thinking.

That's enough for some people if they are doing what they love

Spose but plenty of ways to earn $60k without so many years in uni if your only striving to be at that income bracket - understand different if it's a passion

Spose but plenty of ways to earn $60k without so many years in uni if your only striving to be at that income bracket - understand different if it's a passion

it's like nursing, your not doing it to be rich your doing it to give something back and make a difference.

Same as I could get Katie a job starting job here around 50% more than she currently on, after a degree, post grad and years of experience. but no way should would move out of nursing.

We could all become train drivers and hate our jobs!

yeah this really bugs me, train drivers starting salary 95K, nursing starting salary $50,856

seriously.

My boss said if you get 3 people jump in front of you you get retired?

is that three in one hit?

this article references some-one who has been in 13 actidents is on FB tho so even less truth than hearld sun:

https://www.facebook.com/notes/help-hope-healing/a-train-drivers-torment-a-train-drivers-perspective-on-suicide-by-train/501654899914454

Metro did reference one who has been in 5 in this one.

http://www.theage.com.au/victoria/hidden-tragedy-of-rail-suicides-20120603-1zq87.html

so not looking like lifetime payout.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...