Jump to content
SAU Community

Recommended Posts

but someone else wired my car, i think i know what im talking about.

im super curious to see how my new-age-thinking crank trigger goes. super bike CDI coils should be good for an extra 20fwkw at phillip island.

21 minutes ago, Leroy Peterson said:

there isnt anything wrong with powerfc. i retained mine for so long because it was basically the only option. i didnt have a stock ecu to put a nistune into.

but i feel i've seen the light. it shocked me earlier today to see you can still buy powerfc's brand new (for some cars).

 

ever since haltech took on motec's pay model, its hardly value for money. mind you, every time I've asked someone "why do 90% of professional motorsport teams use motec?" the answer has always been "because they're the best" *queue Tina Turner*

and whats with haltech and CAS disc issues? (i know the disc is a POS, but does it work or doesnt it?)

 

Matt do you only chime in on SAU when you feel like arguing with someone?

 

Key word being motorsport professionals...the kind of guys who have already bought everything else they can legally buy...and replace fender bolts with titanium ones because it saves 300 grams! On the street or amateurs around a track, another psi of boost or better tyres will do more for your performance!

5 minutes ago, Birds said:

Key word being motorsport professionals...the kind of guys who have already bought everything else they can legally buy...and replace fender bolts with titanium ones because it saves 300 grams! On the street or amateurs around a track, another psi of boost or better tyres will do more for your performance!

i was more pointing at: what does motec have/do that others cannot match?

8 minutes ago, Birds said:

Key word being motorsport professionals...the kind of guys who have already bought everything else they can legally buy...and replace fender bolts with titanium ones because it saves 300 grams! On the street or amateurs around a track, another psi of boost or better tyres will do more for your performance!

 

actually f**k all that stuff.

for us amateurs best way to get faster times is seat time...

 

true story.

13 minutes ago, Leroy Peterson said:

i was more pointing at: what does motec have/do that others cannot match?

I think the question we need to ask here Leroy, is why do you hate power FC so much?

10 hours ago, Birds said:

I think the question we need to ask here Leroy, is why do you hate power FC so much?

i dont hate it. I just think its poor value for money. I dont get how so many second-hand ones sell on SAU. I struggled to sell my GTiR one because nobody wants them (even though they can be used on any FWD/AWD SR20), and they're discontinued too.

They're archaic. They're from a generation of japanese products that required you to have a $2000 Defi gauge setup to monitor/display information that almost every ECU can do itself now. The Autronic I've switched to now is still pretty old-school but reading the manual and some of the parameters that can be tweaked or programmed is pretty exciting.

I think I read someone here describing a PowerFC as a stock ECU with a piggyback unit built inside it. Sounds pretty accurate to me. 

19 hours ago, Leroy Peterson said:

whats your budget? that kind of stuff isnt cheap... LED and halo rings is one thing, full cut-n-shut Vulcans or projectors is something else.

You chasing full-professional workshop or dont mind garage/side-project stuff?

 

damn cats running wild these days. i think the hippy should be re-introduced as a control measure.

 

Not fussed who does it, as long as its a good job.

Quotes atm are around $750 to $1k,. For a dual/quad projector setup

1 hour ago, Leroy Peterson said:

i dont hate it. I just think its poor value for money. I dont get how so many second-hand ones sell on SAU. I struggled to sell my GTiR one because nobody wants them (even though they can be used on any FWD/AWD SR20), and they're discontinued too.

They're archaic. They're from a generation of japanese products that required you to have a $2000 Defi gauge setup to monitor/display information that almost every ECU can do itself now. The Autronic I've switched to now is still pretty old-school but reading the manual and some of the parameters that can be tweaked or programmed is pretty exciting.

I think I read someone here describing a PowerFC as a stock ECU with a piggyback unit built inside it. Sounds pretty accurate to me. 

They're cheap, easy to re-sell, quick to install, most Jap specialists can tune them with a quick turn around using the same base maps for similar setups..

I think it's very much a case of don't fix what isn't broken. I don't know about you and the VIP generation, but all I need an ECU to do in my car is make the engine turn. The bells and whistles, gauges, 20 sensor inputs and antilags etc. will do sfa for the performance majority of tuned street cars and that is why PFC is still popular. The requirements of most users peaked with this product.

4 hours ago, Leroy Peterson said:

i'll be sure to recommend the PowerFC to Daz for his 1000hp street car

1000hp supra is not an average street car - no matter how you try to slice it

6 hours ago, joeyjoejoejuniorshabadoo said:

For your average street car / weekend warrior you simply don't need any more than a power FC offers. Shit I didn't even bother with a hand controller

nah f**k that.
haltech FTW.
support straya.
if you dont like it, leave.
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...