Jump to content
SAU Community

Recommended Posts

4 hours ago, Mohsen said:

for the GTR, just gonna repair it and have a nice 330ish kw cruiser.

the sedan is being stripped and put into storage.
may come back soon, may come back in like 10 years, i dont know. nothing on the cards for it atm.
 

motor, front end parts and the nice interior pieces will go into the R.
 

Where you putting it in storage? Anywhere I can slot in a car? Will pay monies

28 minutes ago, Daz said:

Just got this from UK forums 

"4th gear is the input shaft effectively. Select 4th and the input shaft is locked to the main shaft and drives straight through at 1.00 ratio - most efficient gear in the box, lay shaft is bypassed"

 

So stock 4th would be pretty strong then?

Yes 4th gear or whatever is 1:1 ratio in a gearbox is the strongest because 1. There is no differential in the ratio (a small gear turning a big gear or vice versa) and 2. No layshaft involved because it's bypassing it and going straight from input shaft to output shaft. You'll snap the input shaft before you lose 4th gear. When you blow another gear 4th is usually all you're left with to limp home in.

It's therefore the best gear to tow a car in (unless going up a hill and struggling in 4th).

A lot of kits only bother with the first three gears because you can't replace the 1:1 and 5th/6th are rarely used or don't see much stress in racing (only on straights). The number of 5th and 6th gears that get smashed from towing trailers/cars in them, however...

2 hours ago, Leroy Peterson said:

Jesse Streeter?

 

@luke gtr @Birds Now's your chance to have that camaro you've aaaaaaaaallllways wanted

http://www.carsales.com.au/dealer/details/Chevrolet-Camaro-/OAG-AD-13503676/?Cr=0

Hurr durr what should I advertise my car for...errr I'll add up all my receipts and then add 20 grand appreciation and 30 for the time I put into it, yer that's prolly a good price

40 minutes ago, Birds said:

Yes 4th gear or whatever is 1:1 ratio in a gearbox is the strongest because 1. There is no differential in the ratio (a small gear turning a big gear or vice versa) and 2. No layshaft involved because it's bypassing it and going straight from input shaft to output shaft. You'll snap the input shaft before you lose 4th gear. When you blow another gear 4th is usually all you're left with to limp home in.

It's therefore the best gear to tow a car in (unless going up a hill and struggling in 4th).

A lot of kits only bother with the first three gears because you can't replace the 1:1 and 5th/6th are rarely used or don't see much stress in racing (only on straights). The number of 5th and 6th gears that get smashed from towing trailers/cars in them, however...

Thanks very helpful. 

So I may as well go the 1-3 kit with strengthened holinger input shaft? 

As there is no aftermarket 4th gear then I may as well also retain the factory 5th as I don't really ever race upto 5th (speeds are usually way too high by then and I'm usually lengths ahead already :P

Edited by Daz
35 minutes ago, Daz said:

Thanks very helpful. 

So I may as well go the 1-3 kit with strengthened holinger input shaft? 

As there is no aftermarket 4th gear then I may as well also retain the factory 5th as I don't really ever race upto 5th (speeds are usually way too high by then and I'm usually lengths ahead already :P

Pretty much. If 4th takes you to 220-230 and you're not going to see above that on the street (I hope lol) then the 5th will only be used on highways for fuel economy. You'll more likely be off boost when accelerating in 5th too, in which case no worries. If it doesn't cost much more for a replacement 5th gear then may as well do it while you're doing the rest, but if it's like $500+ then fk it I say.

  • Like 1
2 hours ago, Borci88 said:



Lmao its f**king not. Stop spreading rubbish. You wouldn't have to carry around a laptop to "fully tune your car wherever you go"  if you had a PFC instead of Nistune.

I don't "have" to. I choose to. And I have a haltech, fyi. With a PowerFC you're at the mercy of whatever happened at the tuner. That's nowhere NEAR enough to be confident in any tune.
Hand controller is a joke when you can interact with an actual ECU.
PowerFC, the official ECU of "Well, it was already there when I got the car..." or "I need something tunable and my stock ECU is not tunable". But if you're there, ANY option beats it out.

  • Like 1
3 minutes ago, Kinkstaah said:

I don't "have" to. I choose to. And I have a haltech, fyi. With a PowerFC you're at the mercy of whatever happened at the tuner. That's nowhere NEAR enough to be confident in any tune.
Hand controller is a joke when you can interact with an actual ECU.
PowerFC, the official ECU of "Well, it was already there when I got the car..." or "I need something tunable and my stock ECU is not tunable". But if you're there, ANY option beats it out.


Ahh a Haltech fanboy I see. 

Hand controller aint a joke, you get a good tuner who knows what hes doing you dont NEED to touch ANYTHING tune wise. You watch the hand controller and read out 8 different sensors that are going on in the engine. 

Have had a Nistune, now I run a PFC. Won't touch a Haltech, too annoying to tune, shit with stock CAS, don't want 8 expander boxes sitting in my foot well just to run a couple of extra sensors. If you could look past the internet fanboy and sales pitch of these ECUs, you would understand that a PFC does EVERYTHING you NEED it to do. 

It doesn't do antilag, boost by gear, flex fuel, (boost, starting, timing, etc) have a MAP sensor, have a controller I can use on a damn PC...
It doesn't auto log while the car is running so I can go back and see what HAPPENED. It doesn't have 5 channel engine protection. Won't run a wideband (I think?) Won't run a wideband controller.

These are minimum requirements for an ECU.
Never had issues with the CAS on mine.

If you don't think a tune needs a touchup or monitoring then ...  well, lets say once you see it you can't unsee it or live happily without it.

4 minutes ago, Kinkstaah said:

It doesn't do antilag, boost by gear, flex fuel, (boost, starting, timing, etc) have a MAP sensor, have a controller I can use on a damn PC...
It doesn't auto log while the car is running so I can go back and see what HAPPENED. It doesn't have 5 channel engine protection.

 

These are minimum requirements for an ECU.
Never had issues with the CAS on mine.

If you don't think a tune needs a touchup or monitoring then ...  well, lets say once you see it you can't unsee it or live happily without it.

Not needed but PFC PRO does antilag, Not Needed, Not needed in 9/10 cases, D-Jetro.

The only downside to PFCs is engine protection, other than that they do the job and they do the job reliably. You are KIDDING yourself if you think you NEED those features. 

PFC = $500 + $500 to tune
Haltech = $2400 + $900+ to tune with all the features (This doesn't include the cost of the IO Boxes and paying someone to wire it all in)

Guess what, they both get me down to the shops.. and they both get me out on the race track reliably. Guess what I'll be choosing... 

  • Like 1

That's great, but like I said - Maybe you can live without knowing. It doesn't mean it doesn't happen.

 

I use *all* of the features I listed, it has plenty more I don't, and any other major ECU will do this too (or more, like Traction control on Motec, etc).
They do the job. They can provide a tune to an otherwise untenable car.

Power FC can't do anything ANYTHING that another ECU can, and a lot of things provide more features than a PowerFC.

 

Your "not needed" is my "holy shit that saved my engine" or "useful diagnostic tool". There's no reason to choose a PowerFC over anything. Ever. Unless you got it essentially for free.

The argument can be made that the PFC is enough. It can't be made that it's better.

To get around my wiring drama I'll be using a r34 ecu + nistune but loading a stagea rom. This is due to stagea not having traction control which the r34 does....

Now I need to work out how to bypass ecu going into limp mode due to abs missing.

1 hour ago, Kinkstaah said:

I don't "have" to. I choose to. And I have a haltech, fyi. With a PowerFC you're at the mercy of whatever happened at the tuner. That's nowhere NEAR enough to be confident in any tune.
Hand controller is a joke when you can interact with an actual ECU.
PowerFC, the official ECU of "Well, it was already there when I got the car..." or "I need something tunable and my stock ECU is not tunable". But if you're there, ANY option beats it out.

There's a bit of misinformation here dude!

For starters, you pay a tuner to sort out a tune for you. If you're not confident in a tune that you can leave it static / set and forget until you've changed something significant about the vehicle, then you need a new tuner who doesn't work on a knife edge and can allow for some variance. That extra 5rwkw is not worth it.

Hand controllers can actually do a lot considering what most use them for (sensor display/diagnostics). Having one is a luxury and not a necessity; no one is claiming it's the greatest thing since sliced bread, but it's very occasionally handy to adjust settings like idle without carrying around out a laptop.

Meanwhile you're pretty much slating the modern luxuries of modern ECUs as necessities and bare minimums when they aren't.

What really shuts this down is that you can interact directly with the ECU and tune a PFC yourself, easily. I have an FC Hako USB cable, which cost about $100 from memory, and sits in my glovebox. At any time I can plug it into a laptop and tune to my hearts content or log data. Minus flex fuel, which I don't actually need, there is nothing a Haltech or Nistune will give me over and above the PFC. The proof of this is that I've run one flawlessly for the last 5 years and "upgrading" the ECU would give me nothing but headaches and minus $1000-2000. It's dinosaur tech, but they got it right the first time.

Birds... you don't use the functions I use on a daily basis and require.

No tuner, Not Chequered, Not Racepace pump out tunes that can't be touched up and modified on the road. Maybe you're OK with a good enough tune that feels right. Maybe you're not like me and will look at graphs and change a fuel cell months after the fact because the AFR is out by 0.5 in a certain cell I barely hit. Cars change. I know what mine is doing and a fuel pump failing will never kill me, neither will a filter, neither will any of this. It's not the car will explode under load. It's ALLLLLLL the stuff that is NOT full load that you can DIY. Saving you tuning time, if you're in to that, too. Plus you get a car that really DOES drive like a factory car.

Trust me when I say your car will feel absolutely fine blasting down the street on boost at 13:1 AFR or 14:1 AFR.
Ever drive the car and have a strange miss? Going back in time and seeing what happened is un-losable once you can. Hand controllers are great, but a laptop is better. Learn your car and your setup and within a short period of time you'll just be borrowing the dyno instead of being at the mercy of someone tuning your car for you. Knowing wtf they are doing and why and how is really quite rewarding.

But I do. Even not having access to flex is an instant game breaker. Like it could do everything EXCEPT flex and yep, sorry, game breaker. These are features that I live and use all the time. Not everyone does, but I do and I would certainly never go back. Cold starts across an entire year? Not a problem. If it is a problem, you can just sort it out.

The power FC is a basic unit which can give the same features of essentially a factory tuned ECU.

I really, really, like the extra features and all I've said is if someone said "I don't have an ECU, what would you buy?" a PowerFC is never on that list. It's just not. It's the same reason you wouldn't suggest someone put a T40Z or HKS T51R on their car in 2016, but you wouldn't necessarily destroy for no reason.

 

 

 

8 hours ago, Kinkstaah said:

Birds... you don't use the functions I use on a daily basis and require.

No tuner, Not Chequered, Not Racepace pump out tunes that can't be touched up and modified on the road. Maybe you're OK with a good enough tune that feels right. Maybe you're not like me and will look at graphs and change a fuel cell months after the fact because the AFR is out by 0.5 in a certain cell I barely hit. Cars change. I know what mine is doing and a fuel pump failing will never kill me, neither will a filter, neither will any of this. It's not the car will explode under load. It's ALLLLLLL the stuff that is NOT full load that you can DIY. Saving you tuning time, if you're in to that, too. Plus you get a car that really DOES drive like a factory car.

Trust me when I say your car will feel absolutely fine blasting down the street on boost at 13:1 AFR or 14:1 AFR.
Ever drive the car and have a strange miss? Going back in time and seeing what happened is un-losable once you can. Hand controllers are great, but a laptop is better. Learn your car and your setup and within a short period of time you'll just be borrowing the dyno instead of being at the mercy of someone tuning your car for you. Knowing wtf they are doing and why and how is really quite rewarding.

But I do. Even not having access to flex is an instant game breaker. Like it could do everything EXCEPT flex and yep, sorry, game breaker. These are features that I live and use all the time. Not everyone does, but I do and I would certainly never go back. Cold starts across an entire year? Not a problem. If it is a problem, you can just sort it out.

The power FC is a basic unit which can give the same features of essentially a factory tuned ECU.

I really, really, like the extra features and all I've said is if someone said "I don't have an ECU, what would you buy?" a PowerFC is never on that list. It's just not. It's the same reason you wouldn't suggest someone put a T40Z or HKS T51R on their car in 2016, but you wouldn't necessarily destroy for no reason.

 

 

 

More misinformation man...

I can change my RacePace tune myself and have done so...while driving out on the road. You can mess with the fuel cells if you really want to. You say a laptop is better...great...I have that with the PFC, I can data log and tune with it why are you saying you can't? Besides that, no, I haven't actually had a strange miss...my tune is awesome cause I paid a professional to set it up for me.

My car feels like a factory tune, perfectly so. It's what I paid Chris to do for me.

You're going OCD on ECUs and blaming the PFC for having shortcomings it doesn't actually have.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...