Jump to content
SAU Community

Recommended Posts

OK I appreciate your difficulties in getting to the tuner but rest assured cam timing can make 100hp difference in some cases. Tuning is not just about timing. There are half a dozen or more variables and the tuner has to change one at a at a time so that he knows what is making a difference and then change another variable which may affect the first etc. .. hence the many hours involved. If you know a good tuner can you not drive down at 4.30am give him the car for a day (say a Friday) and get him to check the cold start on Saturday morning and then drive home? Whatever it takes it has to be done properly.

Problem being I don't. The last two have been a waste of time and money.

Think I will give the local bloke a go. He is all good, just that there aren't many GT-R's around here and I wanted to short cut the learning process by having someone who has done 100 of them do the job.

Cold start is about the only thing that is fine. So a win there.

Hope not and hope so at the same time. May just be the cam gear bolts have come loose. Appears to be a bit of a theme lately. Top nut on the drop link on the front sway bar unwound itself and the link fell out of its hole. Hello oversteer.

Anyway cars goes crackle crackle pop pop on the over run.

To me your graph in the initial post looks VERY responsive for dash 5's, the boost plots in your latest post seem to confirm this.

Maybe the timing belt has skipped a tooth or 2?

Who tunes your car? Surely worth a call to Simon's tuner given the reliability and power he has gotten from all his ...um well utilised R32s :)

Who tunes your car? Surely worth a call to Simon's tuner given the reliability and power he has gotten from all his ...um well utilised R32s :)

Well Ill ask him on the weekend but it is such a balls ache being messed about by Perth tunas that I am happy given the local bloke a go. He knows his stuff just doesnt get so many 26's. 10 hp aint going to get me near Simons things output plus he has all the gearboxes anyway.

If I can gear near 500 that will be a pretty good result. Working on the assumption the cam timing has shifted since it was tuned.

Edited by djr81

Well Ill ask him on the weekend but it is such a balls ache being messed about by Perth tunas that I am happy given the local bloke a go. He knows his stuff just doesnt get so many 26's. 10 hp aint going to get me near Simons things output plus he has all the gearboxes anyway.

If I can gear near 500 that will be a pretty good result. Working on the assumption the cam timing has shifted since it was tuned.

Haha, as of earlier this week I'm back up to 5 spare gearboxes... Was running low after breaking 2 in 2 days :)

With the boost controller fixed it now makes boost low in the range - so the number at 4000rpm is 270rwhp (With -5's so beat that with a stick) instead of 200. The tuna said it was fairly insensitive to ignition advance and had phased the cams as best he could.

Given the torque output is more useful further up the rev range what would people recommend for bigger cams? It has a 256 degree inlet and 252 degree exhaust.

post-5134-0-72021000-1439359765_thumb.jpg

Everyone has already said this but you don't seem to want to do it. Take it to a reputable tuner who knows nissans/rb26's. If you make that $1k a day then f**k me you can afford to take it down to Perth.

A lot of tuning shops offer a car service for $55 a day. Or just go down there early and make a day of it?

Wrong/poor tune can end badly. I drive a lowly old GTST and I won't let the 'local bloke' touch my car!

Dont even worry. What's the wortst thats going to happen...

Probably a bunch of unhelpful suggestions get posted.

Looked on the rb26 dyno thread there are two -5 poncam posts neither of which have printouts. Thinking my old chart may have been with a stuffed boost controller so cannot gauge the response from personal experience.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...