Jump to content
SAU Community

Recommended Posts

While browsing for what Nismo parts were available for my Nismo R32 I found this solid shift unit and so I was wondering what opinions of it were:

http://www.kudosmotorsports.com/catalog/nismo-nismo-solid-shift-gear-lever-32839rn595-nissan-skyline-r32-gtr-gts4-r33-gtr-gts4-r34-25gt4-stagea-wgnc34-260rs-rsfour-p-1160.html

I currently have the interior stripped out of my R32 while it gets repainted so after that gets done it would be a good time to pop this thing in if it's worth the buy. I've never owned a car with a short shift kit before despite having numerous stick shift cars previously and the few times I've driven a car with a short shift kit it just seemed to make the shifts feel notchier so I'd like some opinions first before I decide to bother with this piece.

Thanks in advance for your replies.

Link to comment
https://www.sau.com.au/forums/topic/459065-thoughts-on-nismo-solid-shifter/
Share on other sites

At that price it will be the 10% one - kudos have made a booboo on the description. The 25% one is $605 here;

http://www.kudosmotorsports.com/catalog/nismo-nismo-quick-shift-short-shift-kit-34110rn595-nissan-skyline-r32-gtr-gts4-r33-gtr-gts4-r34-25gt4-stagea-wgnc34-260rs-rsfour-p-1161.html

I have the 10% one and it just feels a little tighter than the stock shifter. I got it mainly because the boot was stuffed on my stock one and I was getting fumes in the cabin. Its fine, the sky wont fall in. but if you want a noticeably shorter shift you'll probably want the 25% one.

Will definitely feel notchier. Nissan boxes are bloody notchy anyway, so adding more is not awesome. The other aspect to consider is that quick shifters do encourage faster synchro wear. It may not be a major consideration, but it is there nonetheless.

Yeah, the R32 box is notchy already so if this just makes it worse I'll probably pass especially since I'm not planning on taking the car to the track except maybe once or twice just to see what it can do. Since they're so rare here in the US I'd rather risk one of my other cars at the track lol.

I wouldn't run one in my car. And i get everything nismo...

Is that because of the synchro wear issue, the feel, or both?

At that price it will be the 10% one - kudos have made a booboo on the description. The 25% one is $605 here;

http://www.kudosmotorsports.com/catalog/nismo-nismo-quick-shift-short-shift-kit-34110rn595-nissan-skyline-r32-gtr-gts4-r33-gtr-gts4-r34-25gt4-stagea-wgnc34-260rs-rsfour-p-1161.html

I have the 10% one and it just feels a little tighter than the stock shifter. I got it mainly because the boot was stuffed on my stock one and I was getting fumes in the cabin. Its fine, the sky wont fall in. but if you want a noticeably shorter shift you'll probably want the 25% one.

I saw that other listing and wasn't sure what the difference was for the higher price. Thanks for the clarification. I didn't consider that one though since 600 bucks seemed too much for a part that I didn't really need - I just was considering it since my R32 is a Nismo so of course I'm looking at all the Nismo parts available for the R32.

I've driven the 25% one, felt alot better than my stock one, much tighter and precise, made for some very quick gear changes...

Good to know it felt good to you but I don't think I can justify the 600 buck price at the moment for the 25% version.

  • 3 weeks later...

I've got the nismo 'solid shifter' on my car - the one with only 10%.

It doesn't feel much shorter in shift to me, but it does feel more 'solid' or more precise in the shift - I think this is due to the more solid bushing they use. The downside of this bushing I've found, is that it definitely transmits more gearbox noise into the cabin - something to be aware of.

Overall, I'm not sure I could recommend it - I'm glad I picked mine up as a cheap second-hander.

I've got the nismo 'solid shifter' on my car - the one with only 10%.

It doesn't feel much shorter in shift to me, but it does feel more 'solid' or more precise in the shift - I think this is due to the more solid bushing they use. The downside of this bushing I've found, is that it definitely transmits more gearbox noise into the cabin - something to be aware of.

Overall, I'm not sure I could recommend it - I'm glad I picked mine up as a cheap second-hander.

Noted. Thanks for the info. From what everyone is saying I think it's a pass for me on either one of the Nismo shift kits especially since my car will rarely see the track if ever.

  • 2 weeks later...

I have the 10% one in my R34. I'm still building the car so I haven't driven it yet, however its installed and I would say it makes a huge difference. It really is almost solid, where as the rubber inside the shaft on the old one was so soft there was a huge amount of flex in it. Obviously this will come at the expense of NVH but I think it will be well worth it as the standard skyline boxes are not the most precise units.

I have an Attain solid shifter... MUCH better than the Nismo one IMO, better quality too.

I Had the Nismo one previously, and A/B ing them the Attain was much nicer to use.

And comes with a solid shift knob, and it's cheaper than the Nismo. With the spare change I changed the plastic bush for a GKTech brass one. I also have the upgraded spring kit int he box, and it feels pretty damn awesome. I also have a urethane gearbox mount.

http://www.rhdjapan.com/attain-solid-shifter-ecr33-rb25det.html

Just needs a close ratio gear set and Im golden. :rofl2:

  • Like 1

Did you notice much noise once you put the GKTech brass bush in? I have one sitting at home but dont know if i want to use it have the uprated springs and it makes the box feel a bit nicer

Yours may be a track car so the noise might not be an issue lol

it is a track car now, but it wasn't when I did it.

Didn't really notice any noise from the bush, but I had solid mounted cradle/solid diff bushes, urethane gearbox mount and Nismo engine mounts, so there was plenty of NVH coming from other areas.

I also don't really mind a little NVH though, so didnt bother me either way. Depends if the inside of your car is like a library or not. ;)

Thanks for the added input guys but unfortunately my car has decided to develop a case of "The Brokens" so the shifter issue is on the back burner until the engine gets sorted lol.

That gear knob looks like the one in the car i drove, i assumed it was a nismo short shifter, was zero noises from it and shifts were awesome like you describe , I had to learn how to drive again cause the shifts were so fast that i was out of sync with the accelerator and clutch so crunched it a few times :/

thanks for that link :thumbsup:

Edited by AngryRB
  • 4 weeks later...

I personally wouldn't run the "solid shifter" as it's basically a stock level cut shorter. the "quick shift" actually is fulcrum change so the shifter is stock height, but shorter throw. I run the quick shift and the quality is outstanding, same as stock, just shorter. The leverage does make it feel a bit more notchy but it's a good and direct feel to the shifts and they are nice and short. My wife loves it. I would certainly not pay 600 for it. find a used one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, when one "money pit" is never enough Noice, and excellent work mate
    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • I hear that would involve some nice country road drives into the hills for Mark...
    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...