Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Well with powercruise 56 done and dusted I'm now in the process of getting the car ready to take to the drag strip. The car performed fantastic all weekend and was great being able to drive a fast car again. We do have some oiling issues to sort out but we know what needs to be done. Currently looking at fixing the transbrake and hooking up nitrous to get the car on converter for future powercruise events. I weighed the car at the track and came in at 1330kg so also looking at taking some weight out and try to run a decent pass before we need to cage it. Fuel system will need a rehash and the old tank will be deleted etc. Yes the paint survived the side pipe action although a couple of arms hanging out the window may not have, will run the screamer up below the dump at some stage.

post-11029-0-79703500-1442812726_thumb.jpg

post-11029-0-03197100-1442812736_thumb.jpg

post-11029-0-08526800-1442812742_thumb.jpg

  • Like 2

Well after long consideration and time wasting I've come up with the fuel system for car. We have decided to go with a mechanical fuel pump setup that's driven by the intake cam shaft. This setup should see us never run out of fuel and will cut the electrical load on the car dramatically. At this point in time the fuel tank will be taken out of the car and a new 30L fuel cell and lift pump setup will be installed, stay tuned!

post-11029-0-07161400-1443394778_thumb.jpg

  • Like 1

Full interior no cage atm (1330kg). I'm in the process of stripping the interior and so far with the passengers front seat, all seat belts, rear seats and some plastic trims I've taken an extra 34kg's. Will leave the dash pad and centre console in adding 2 Kirkey seats + harness bar. Will try and do a full pass without a cage to see what it does. Side pipe will have a matching 2.5" screamer poking out below it at some point!!!

  • 2 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...