Jump to content
SAU Community

Recommended Posts

Hi all, I was a member about 6 years ago and now I got myself a fresh import gtst so I'm back in the game.

Just received my 32 off the boat and was so excited to have another 32 in my life but... my joy was short lived.

After a initial drive, i noticed the car was losing power at random points and when i put the foot down it suddenly goes again and loses power again.

This was the first problem. second is when I had to stop behind another vehicle, at low rpm even with my foot down on the clutch, the car shut down completely so I had to quickly restart it.

I initially drove home and after the first 10 mins of problems, it behaved OK even in the evening when I took it out again and gave it a good run (That's what I thought it needed after being stationary fir a while)

This morning, I gave my new baby a wash and a wax and started the car to warm it up and went inside the house, 5 mins later I went out again because it was too quiet, but to my surprise and horror, the car shut down by itself....

I attempted to start it and it did, for about 5 seconds and RPM dropped and died. this repeated about 3 times before I left it alone for about 10 mins before attempting it again.

10 mins later it started after I put my foot down and it somehow managed to stay alive. I went for a drive and just around the corner when I stopped at an intersection, it died again.

My first skyline had a similar issue, from memory it was the Air Flow Meter.

I was reading the posts and found some similar cases but wanted your inputs in diagnosing what it could be.

The car is a 1993 R32 GTST done 67km Japanese auction grade 4.

its got a ARC super induction box, aftermarket intercooler, and a non vent to air bov.

My first guess is either the AFM or the TPS or coilpack. since it sometimes takes a bit of crank to start her up.

Please let me know what you think.

Link to comment
https://www.sau.com.au/forums/topic/459260-r32-gts-t-problem-losing-power/
Share on other sites

... started the car to warm it up and went inside the house ...

Please don't do that. It wastes fuel and causes damage to the engine (most engine wear occurs during warm up). Also makes the car vulnerable to theft, as one Porsche owner in Canberra can attest!

Back to your problem - get the injectors cleaned, new spark plugs, change oil / filter.

So could be spark plugs, afm,

What is AAC? Timing= belt?

Fuel pump and pressure seems to be ok, but fuel filter I'm not sure about...

And boost leak? The car was running fine after the initial fit it had so I assumed was all good but I was wrong... Seems to boost well when it's working so maybe no leak,,

And finally.. Never knew warming up the car can do damage..... Is this really the case? I thought it was the opposite

One more question for you then, the car sometimes starts up well, but sometimes needs a good crank + tap on the pedal to start up. Is this just old spark plugs or coilpack or a battery that may need replacing soon?

ok, when i talked to the workshop, the car has a standard ecu and has never been tuned in the past from what they can see.

so that's probably out... but by other things, it means something ignition related no?

like spark plugs or coil pack etc?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...