Jump to content
SAU Community

R32 Gtr Hicas Issue

GoneGoose
 Share

Recommended Posts

GoneGoose Apprentice

GoneGoose

Posted
Posted

I recently imported an R32 Skyline GTR to the US and I am having some trouble with the HICAS (I assume). Since Skylines are still new to the US (only '89s and '90s are technically legal so far) I figured you guys might be a better source of information than most of the people local to me.

The short version is: is it worth trying to troubleshoot a HICAS issue, or should I just get an eliminator kit? Does the HICAS provide any actual benefit? I understand what its purpose is, but I see mixed results about whether or not it is a good thing to have.

A description of the HICAS issue I am having is below.

If I accelerate hard to highway speeds (80+kph) while also turning (ex. using a circle on-ramp/interchange), the steering wheel will move off-center. Meaning the top of the steering wheel will be at the 11 o'clock position rather than 12 o'clock like normal. The car still seems to drive straight when that happens, just the steering wheel is no longer straight. After roughly 5 minutes or 10km, the HICAS light will turn on, and the steering wheel will automatically center itself again so the top of the wheel is at the 12 o'clock position and it will stay that way until I turn the car off.

Also, any time I drive at highway speeds for 5 minutes or 10km the HICAS light comes on, regardless of whether or not the steering wheel goes off-center like in the situation described above.

Any advice would be greatly appreciated. Sorry if this has been asked before. I tried to search but didn't see any posts with a problem similar to mine.

Link to comment
https://www.sau.com.au/forums/topic/459559-r32-gtr-hicas-issue/
Share on other sites
GoneGoose Apprentice

GoneGoose

Posted
  • Author
Posted

In that case, do you guys recommend a simple lockout bar similar to this http://topspeedauto.com/nissan-skyline-gts-t-gtr-r32-89-94-jdm-hicas-bypass-kit-hicas-eliminator/, or a full kit like this one http://www.driftworks.com/driftworks-total-hicas-eliminator-kit-for-nissan.html?

Also, thanks for the feedback. I appreciate it.

Jordy32 Experienced

Jordy32

Posted
Posted (edited)

Personally I'd suggest the hicas eliminator kit as you replace a tie rod and a (most probably) worn out ball join with a toe arm and new bushes

A lock bar is much cheaper, you might get some funny faces trying to get the rear aligned with all the hicas gear in there though

Edited by Jordy32
GoneGoose Apprentice

GoneGoose

Posted
  • Author
Posted

Personally I'd suggest the hicas eliminator kit as you replace a tie rod and a (most probably) worn out ball join with a toe arm and new bushes

A lock bar is much cheaper, you might get some funny faces trying to get the rear aligned with all the hicas gear in there though

Driving a RHD car in a LHD country already gets me plenty of funny looks anyway. :cool:

I figured the full eliminator kit would probably be the suggested option, and I was leaning that way myself.

GoneGoose Apprentice

GoneGoose

Posted
  • Author
Posted (edited)

Unplug the small plug from the HICAS computer (in the boot, the box mounted on the right side).

Full eliminator kit is the way to go IMO.

Do you have an aftermarket steering wheel?

Do not have an aftermarket steering wheel, however I just imported the car from Japan 1 month ago so its history is mostly unknown to me and the exporter has not been good about providing information. I do have reason to believe it previously had a full roll cage installed so it stands to reason that other aftermarket modifications were installed at one time.

Edited by GoneGoose
djr81 Grand Master

djr81

Posted
Posted

Unplug the small plug from the HICAS computer (in the boot, the box mounted on the right side).

Full eliminator kit is the way to go IMO.

Do you have an aftermarket steering wheel?

The other things you (may) like to consider is all the pumping and pressure lines that serve the HICAS. You can just loop the thing and render it inoperable or you can do it properly and remove them. Also worth doing or atleast considering is replacing the standard power steering cooler with a small but decent cooler.

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

RE: steering wheels, sometimes the incorrect Boss kit throws the HICAS error (the computer can't figure out if you're turning or something).

But yeah, full eliminator kit is the way to go (it should include the loop for the power steering). Then rip out the HICAS stuff (weight saving!).

GTSBoy Grand Master

GTSBoy

Posted
Posted

The other things you (may) like to consider is all the pumping and pressure lines that serve the HICAS. You can just loop the thing and render it inoperable or you can do it properly and remove them. Also worth doing or atleast considering is replacing the standard power steering cooler with a small but decent cooler.

I echo this sentiment. Removing the hard lines all the way to the front is easy enough on a hoist. Looping at the rear is trivial if you buy a HICAS lockout or replacement kit that includes what you need. The PS cooler is just a loop of pipe and does very little. An auto trans cooler from an R34 is a bloody good size for the PS cooler.

GTSBoy Grand Master

GTSBoy

Posted
Posted

Define issues? Do you mean just the physical problems of getting it out while the engine is in the bay? I wouldn't expect there to be. The solenoid can be removed with the engine in. The hydraulic lines to the pump and reservoir run under the engine and it is nice to be able to access everything more easily when the engine is out, but I'm sure that needn't be a problem if you're just removing the lines that run to the rear from the solenoid.

Mental note for anyone removing everything.....the R32 pump is a 2 stage (or more to the point a 2 circuit pump) with the rear circuit running the HICAS gear and the front running the PS. If you get rid of all the HICAS plumbing it is a prime opportunity to do something about getting rid of the 20+ year old PS pump in favour of a newer single stage pump. I did this by doing a Neo transplant, but that's cheating. I'm just pointing out that you can't just block off the HICAS lines as the pump is still pumping!

WantGTR Mentor

WantGTR

Posted
Posted

Define issues? Do you mean just the physical problems of getting it out while the engine is in the bay? I wouldn't expect there to be. The solenoid can be removed with the engine in. The hydraulic lines to the pump and reservoir run under the engine and it is nice to be able to access everything more easily when the engine is out, but I'm sure that needn't be a problem if you're just removing the lines that run to the rear from the solenoid.

Mental note for anyone removing everything.....the R32 pump is a 2 stage (or more to the point a 2 circuit pump) with the rear circuit running the HICAS gear and the front running the PS. If you get rid of all the HICAS plumbing it is a prime opportunity to do something about getting rid of the 20+ year old PS pump in favour of a newer single stage pump. I did this by doing a Neo transplant, but that's cheating. I'm just pointing out that you can't just block off the HICAS lines as the pump is still pumping!

Thank you thats great! You can still use the standard power steering pump though right? If you were to replace it which would be the correct one?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...