Jump to content
SAU Community

Recommended Posts

I recently imported an R32 Skyline GTR to the US and I am having some trouble with the HICAS (I assume). Since Skylines are still new to the US (only '89s and '90s are technically legal so far) I figured you guys might be a better source of information than most of the people local to me.

The short version is: is it worth trying to troubleshoot a HICAS issue, or should I just get an eliminator kit? Does the HICAS provide any actual benefit? I understand what its purpose is, but I see mixed results about whether or not it is a good thing to have.

A description of the HICAS issue I am having is below.

If I accelerate hard to highway speeds (80+kph) while also turning (ex. using a circle on-ramp/interchange), the steering wheel will move off-center. Meaning the top of the steering wheel will be at the 11 o'clock position rather than 12 o'clock like normal. The car still seems to drive straight when that happens, just the steering wheel is no longer straight. After roughly 5 minutes or 10km, the HICAS light will turn on, and the steering wheel will automatically center itself again so the top of the wheel is at the 12 o'clock position and it will stay that way until I turn the car off.

Also, any time I drive at highway speeds for 5 minutes or 10km the HICAS light comes on, regardless of whether or not the steering wheel goes off-center like in the situation described above.

Any advice would be greatly appreciated. Sorry if this has been asked before. I tried to search but didn't see any posts with a problem similar to mine.

Link to comment
https://www.sau.com.au/forums/topic/459559-r32-gtr-hicas-issue/
Share on other sites

In that case, do you guys recommend a simple lockout bar similar to this http://topspeedauto.com/nissan-skyline-gts-t-gtr-r32-89-94-jdm-hicas-bypass-kit-hicas-eliminator/, or a full kit like this one http://www.driftworks.com/driftworks-total-hicas-eliminator-kit-for-nissan.html?

Also, thanks for the feedback. I appreciate it.

Personally I'd suggest the hicas eliminator kit as you replace a tie rod and a (most probably) worn out ball join with a toe arm and new bushes

A lock bar is much cheaper, you might get some funny faces trying to get the rear aligned with all the hicas gear in there though

Edited by Jordy32

Personally I'd suggest the hicas eliminator kit as you replace a tie rod and a (most probably) worn out ball join with a toe arm and new bushes

A lock bar is much cheaper, you might get some funny faces trying to get the rear aligned with all the hicas gear in there though

Driving a RHD car in a LHD country already gets me plenty of funny looks anyway. :cool:

I figured the full eliminator kit would probably be the suggested option, and I was leaning that way myself.

Unplug the small plug from the HICAS computer (in the boot, the box mounted on the right side).

Full eliminator kit is the way to go IMO.

Do you have an aftermarket steering wheel?

Do not have an aftermarket steering wheel, however I just imported the car from Japan 1 month ago so its history is mostly unknown to me and the exporter has not been good about providing information. I do have reason to believe it previously had a full roll cage installed so it stands to reason that other aftermarket modifications were installed at one time.

Edited by GoneGoose

Unplug the small plug from the HICAS computer (in the boot, the box mounted on the right side).

Full eliminator kit is the way to go IMO.

Do you have an aftermarket steering wheel?

The other things you (may) like to consider is all the pumping and pressure lines that serve the HICAS. You can just loop the thing and render it inoperable or you can do it properly and remove them. Also worth doing or atleast considering is replacing the standard power steering cooler with a small but decent cooler.

RE: steering wheels, sometimes the incorrect Boss kit throws the HICAS error (the computer can't figure out if you're turning or something).

But yeah, full eliminator kit is the way to go (it should include the loop for the power steering). Then rip out the HICAS stuff (weight saving!).

The other things you (may) like to consider is all the pumping and pressure lines that serve the HICAS. You can just loop the thing and render it inoperable or you can do it properly and remove them. Also worth doing or atleast considering is replacing the standard power steering cooler with a small but decent cooler.

I echo this sentiment. Removing the hard lines all the way to the front is easy enough on a hoist. Looping at the rear is trivial if you buy a HICAS lockout or replacement kit that includes what you need. The PS cooler is just a loop of pipe and does very little. An auto trans cooler from an R34 is a bloody good size for the PS cooler.

Define issues? Do you mean just the physical problems of getting it out while the engine is in the bay? I wouldn't expect there to be. The solenoid can be removed with the engine in. The hydraulic lines to the pump and reservoir run under the engine and it is nice to be able to access everything more easily when the engine is out, but I'm sure that needn't be a problem if you're just removing the lines that run to the rear from the solenoid.

Mental note for anyone removing everything.....the R32 pump is a 2 stage (or more to the point a 2 circuit pump) with the rear circuit running the HICAS gear and the front running the PS. If you get rid of all the HICAS plumbing it is a prime opportunity to do something about getting rid of the 20+ year old PS pump in favour of a newer single stage pump. I did this by doing a Neo transplant, but that's cheating. I'm just pointing out that you can't just block off the HICAS lines as the pump is still pumping!

Define issues? Do you mean just the physical problems of getting it out while the engine is in the bay? I wouldn't expect there to be. The solenoid can be removed with the engine in. The hydraulic lines to the pump and reservoir run under the engine and it is nice to be able to access everything more easily when the engine is out, but I'm sure that needn't be a problem if you're just removing the lines that run to the rear from the solenoid.

Mental note for anyone removing everything.....the R32 pump is a 2 stage (or more to the point a 2 circuit pump) with the rear circuit running the HICAS gear and the front running the PS. If you get rid of all the HICAS plumbing it is a prime opportunity to do something about getting rid of the 20+ year old PS pump in favour of a newer single stage pump. I did this by doing a Neo transplant, but that's cheating. I'm just pointing out that you can't just block off the HICAS lines as the pump is still pumping!

Thank you thats great! You can still use the standard power steering pump though right? If you were to replace it which would be the correct one?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...