MJTru Posted October 4, 2015 Share Posted October 4, 2015 Hi guys i was wondering what and how whould an engine behave if the turbo housing is to small. Not using a dyno just pushing it hard. Im thinking the housing is a bit small on my gtr, but im a bit mixed up because the car runs so good. Any clues would be appreciated. Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/ Share on other sites More sharing options...
GTSBoy Posted October 4, 2015 Share Posted October 4, 2015 Goes strong at low revs and/or low boost. Power curve falls over flat or worse when revs or boost are high (ie. More gas than the housing can flow) Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7613613 Share on other sites More sharing options...
KiwiRS4T Posted October 4, 2015 Share Posted October 4, 2015 Excessive exhaust gas temps Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7613620 Share on other sites More sharing options...
Dose Pipe Sutututu Posted October 4, 2015 Share Posted October 4, 2015 torque drops, housing glows, EGTs are high and motor won't take timing 1 Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7613621 Share on other sites More sharing options...
MJTru Posted October 5, 2015 Author Share Posted October 5, 2015 (edited) If you guys listen to the motor can you be able to tell from the sound of it. Sorry question sounds dumb. But all the other stuff seem ok. Im at around 1000f on the EGT gauge when im in the gas. What im hearing is like at top rpms when doing a durn out or lauch the rpms seems to get like a scramble sound. Dont get me wrong when i dump the clutch the car goes. I had a friend do a burn out for me so i could record the sound. Cant you by any chance tell what it might be from the sound of the exhaust. ?? Well i cant tell torque drop off no dyno:( timing im not to sure about. I can say its all cheap stuff. Cheap ebay 38mm gate $69 Cheap ebay manifold. $159 Cheap hx35 diesel turbo. $370 Stock injectors Wolbro 450 pump intank $ 110 Power fc. $800 Twin rb25 afm. $180 The motor is stock rods and pistons Just rebuilt fresh with arp head studs acl bearing, MLS head gasket. Its also has a racefab sump. And a fully refurbished head. Its really a budget build. Juat wish i could figure this out Edited October 6, 2015 by MJTru Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614211 Share on other sites More sharing options...
GTSBoy Posted October 6, 2015 Share Posted October 6, 2015 Exhaust leak? By the way, 1000f is waaaaaaaay too low for on load egt. Unless perhaps you're not measuring it before the turbo. Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614215 Share on other sites More sharing options...
MJTru Posted October 6, 2015 Author Share Posted October 6, 2015 Its right after the turbo on the down pipe Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614219 Share on other sites More sharing options...
MJTru Posted October 6, 2015 Author Share Posted October 6, 2015 I see no sign of an exhaust leak. Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614222 Share on other sites More sharing options...
MJTru Posted October 6, 2015 Author Share Posted October 6, 2015 https://m.youtube.com/watch?v=yhVVImLfieI Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614224 Share on other sites More sharing options...
MJTru Posted October 6, 2015 Author Share Posted October 6, 2015 Dont mind that bloke. He was having fun. Please listen to the exhaust note. It kind of gets fluttered would be the best way to explain it. Damn i just dont know:wacko: Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614227 Share on other sites More sharing options...
STATUS Posted October 6, 2015 Share Posted October 6, 2015 prob detonation your hearing. Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614234 Share on other sites More sharing options...
GTSBoy Posted October 6, 2015 Share Posted October 6, 2015 I dunno. Just sounds like an RB20 getting raped to me. 1 Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614235 Share on other sites More sharing options...
scotty nm35 Posted October 6, 2015 Share Posted October 6, 2015 There is probably 2-300F difference between the manifold gas temp and the dump pipe. You got the dyno graph? If the turbo is too small the torque will drop off dramatically in the top end... Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614242 Share on other sites More sharing options...
Ben C34 Posted October 6, 2015 Share Posted October 6, 2015 Asode from the sideways video I like your style of building cars. Just build and thrash it. 1 Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614243 Share on other sites More sharing options...
MJTru Posted October 6, 2015 Author Share Posted October 6, 2015 Well its not detonation. The power fc is at 42 knock max at 14psi. Thats ok to me. My work tends to be tidy with nothing hitting the block (false knock) well untill i get a dyno i guess ill have to stay guessing. Or using my god given talents. I know about the torque drop off part just have no way to figure it out. Makes me want to move somtimes. So much guys blow up motors here due to tuning issues. Even i did. Untill i first learned my limits and some road tricks to follow, by no means is it a method that is better over using a dyno. I stop spending big money on parts and turbos. I use cheap ebay and Chinese crap to build, well other than the motor part. I keep it stock just fresh and push the oil issues to the limit. This whole build was under 2k. The performance is ok. But well worth the money. The only think i have going for me is i can build my own motors. Thats it. Thanks anyways guys. For everything Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614275 Share on other sites More sharing options...
Hadouken Posted October 6, 2015 Share Posted October 6, 2015 are you sure you are just not running out of fuel up top? Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614284 Share on other sites More sharing options...
gtr jet Posted October 6, 2015 Share Posted October 6, 2015 Standard injectors are only good for around 400hp to the tyres so if you're making any more than that they're probably at their limit. What times and mph are you running? Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614310 Share on other sites More sharing options...
MrStabby Posted October 6, 2015 Share Posted October 6, 2015 Standard injectors are only good for around 400hp to the tyres so if you're making any more than that they're probably at their limit. What times and mph are you running? Standard GTR or GTST injectors? Also - dirty injectors may only flow 2/3rds of clean injectors... Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614315 Share on other sites More sharing options...
gtr jet Posted October 6, 2015 Share Posted October 6, 2015 I always look at the display pic of the GTR. My bad. If they're GTS-T injectors then that's most likey your issue. Especially at 14psi on a HX35. Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614334 Share on other sites More sharing options...
MJTru Posted October 6, 2015 Author Share Posted October 6, 2015 You guys might just be right. The injectors are maxing out. And fast. There rb26 injectors. I do want to buy a set of injectors but to tell you the truth. I dont have a dyno so only injectors that come with the lag times would be the set im interested in. Like the stuff on rhd japan. Once i do the formula and input it into the power fc. Its just a matter of clean up the fuel map a bit. Thats all i can do lean some mistakes maybe even blow this motor up and start over again. People say the those injectors are old fashion and i should go with some newer stuff like mega squirt or somthing like that. Does any of.you guys know what would be a good option in this situation. I really wouldnt mind a set of upgraded injectors. Link to comment https://www.sau.com.au/forums/topic/460146-turbo-housing-to-small/#findComment-7614785 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now