Jump to content
SAU Community

Recommended Posts

12 hours ago, Dose Pipe Sutututu said:

Big changes!

Do like the rear being tidied up, looking good Bill!

Thanks Johnny. To celebrate, im taking it to a track day on Saturday and giving it a good thrashing.

  • Like 3
  • 2 weeks later...

So ended up going to Sandown last weekend. Was a typical Melbourne weather day, from totally dry and sunny to fully wet and bucketing down as can be seen above. Couldn't improve on my pb, my tyres are pretty shot but in the name of $ saving, i'll use them again next time out. Still managed a 1.25 flat. Got a heap of pics from John at Trackside action photography this time, here they are.


22135406_1397196197064214_7761256862170161682_o.jpg22181194_1397196700397497_6027990130172966466_o.jpg22048036_1397932370323930_5101105702955874634_o.jpg22218309_1397930800324087_1194857599953513090_o.jpg22256716_1400676173382883_5253060482961209735_o.jpg22181412_1400676906716143_8113177088375392526_o.jpg22218631_1400678673382633_2833716593429466552_o.jpg22255051_1400677966716037_1733500802346405282_o.jpg22179718_1400681596715674_888965418770083401_o.jpg22218184_1400682536715580_6499031891670633899_o.jpg22218589_1400682023382298_4950269002281700995_o.jpg22218507_1400682120048955_5090346215609971671_o.jpg22179915_1400682553382245_4426309199082310805_o.jpg22289604_1400682796715554_1789957860807965128_o.jpg22179813_1400684033382097_8213011764943706019_o.jpg22218418_1400684870048680_4956688802614361971_o.jpg22181650_1400684316715402_7590449916996631927_o.jpg22291468_1400685130048654_6198243962558463507_o.jpg22179725_1400356850081482_3107673103603536943_o.jpg

And a couple more taken by others and myself.

IMG20170930112927.jpgIMG20170930112856.jpg22104494_1906597006033333_8769039140868511188_o.jpg

  • Like 4

Looking Good!

Just noticed youse haz a roll cage! Do you still retain the rear seats or have they been removed?

I want a cage in the distant future too (mainly for safety) but want to retain the interior as it reduces road noises and suppresses all the ancient creaks and squeaks.

Do you have interior shots Bill? Oootsss

Looking Good!
Just noticed youse haz a roll cage! Do you still retain the rear seats or have they been removed?
I want a cage in the distant future too (mainly for safety) but want to retain the interior as it reduces road noises and suppresses all the ancient creaks and squeaks.
Do you have interior shots Bill? Oootsss

Yep, rear seat can be retained, although they are removed for track days for hektic weight reductions. I did have to modify (ruin/crush) the upper rear seat on the edges to get it back in but it's ok as i have a spare anyway. Having seats in makes a big difference in noise levels, i would not let passengers sit in the back though for safety reasons. Passengers comfortably fit but if something goes wrong and they hit their head on the bars it would be pretty bad.

Heres a couple of bad pics i took ages ago. Seats aren't in atm so these pics will have to do.
tapatalk_1507245725032.jpegtapatalk_1507245756697.jpeg

The only issue here is there's no main hoop diagonal bars! i.e. little to no roll over support which is literally what a roll cage is for.

Having said diagonal bars will make it exponentially hard to get the rear seats back in.

4 minutes ago, Dose Pipe Sutututu said:

it's not an AGI one is it?

Johnny is there something you know about AGI that makes you not want one? seems to be the best/only off the shelf option for a bolt in R33 cage.

2 minutes ago, GTofuS-T said:

The only issue here is there's no main hoop diagonal bars! i.e. little to no roll over support which is literally what a roll cage is for.

although better than nothing... so I can't really talk haha...

Alrighty, cage is a jap spec safety 21 made by cusco. It isn't cams compliant as main hoop is 2mm under new cams regs diameter. Doesn't bother me as i don't enter any events where a cage is mandatory so its not an issue.

It is a basic cage, yes no diagonal on main hoop but there is a removable diagonal that goes from drivers side main hoop to passenger side rear stay bar. Its not the greatest cage, agi is def better but it does the job and as said above is better than no cage at all, it us also quite stealthy on the street without the diagonal and if i wanted to i could remove the whole thing in around half an hour, which i recently did to get the quarter windows removed.


Definitely better cages out there but better than nothing or a backyard job with questionable welds. Was also sourced cheaply and fits my bang for buck budget build strategy.

If i was to become more serious and the car becomes much faster, then a proper comprehensive weld in cage would be in order for sure. As it stands, this will do for now.

  • Like 2
  • 3 weeks later...

Hit Sandown again last weekend with the wrx club guys. Unfortunately no pb, tyres are way past prime but still managed a mid 1.25, enough for 14th outright out of 73 and some pretty well developed race cars, was a little over a second off my best time. Also had slight misfire, i think its time to replace the sparkies, its been a while.

 

It was another miserable wet and soggy Melbourne day. Thankfully it dried up in the avo and some decent runs where had. Found 1 watermarked pic on the wrx club page. Was cutting across the corner to dandy rd V8 supercar style trying to exploit any tenths i could out of the dying tyres.

Screenshot_2017-10-26-18-25-13-07.thumb.png.b4bf64b6892aa28f994a6c2ac8c9a93d.png

 

Also picked up some new tyres today. So out with the old, you served well lebspec $200 yalla A050

IMG20171024180451.thumb.jpg.5fe7b45726981c9094a990eaffa2d6af.jpg

 

In with the new, enter $205 Nankang sui min hotpot AR1. IMG20171026153447.thumb.jpg.a07b79ef4800322435495edf5221f5dd.jpg

 

If these can go within a second of my PB at Sandown with the car remaining the same, ill be happy. Going to have to find other ways to go faster after a baseline run.

 

I noticed my rotors had developed little hairline cracks a couple of track days ago, Google advised this wasn't a problem as long as they weren't too big and running a certain way. This proved accurate as the discs made it through the last track day ok but did develop significant shudder towards the end of the day. I thought about giving them a skim but decided against it due to the little cracks and dont like the idea of reducing the thickness when newies are cheap. I ordered a new set of gtr size RDA fronts for $139. Thanks ebay special offer. The current rotors will become spares and possibly get a skim down the track depending on their condition on closer inspection.

 

Thats all i got this time around, can't wait to get out to Sandown again and see how these tyres go.

 

 

  • Like 2
  • 2 weeks later...

Got out to Sandown again to give the AR1 a go. Was quite a productive day and I'm impressed. My existing best time was 1.24.3 set on A050 super softs. I headed out in the first session with starting pressures set at 26psi. I managed to run a 25.1, pressures where sitting at 36 rear and 34 front, desired pressure was 36. I was too lazy to pump some air in and left it as was and monitored it throughout the day. Pressures remained between 34-36. The second session yielded a new pb of 1.24.1, the 3rd session a 1.23.9 and the 4th produced a 1.23.59. I was not expecting to go faster on these tyres so I am absolutely over the moon with the result. The car has not been changed at all, the setup is exactly as it was for the A050. The only difference between the tyres was the yokos where 255/40/18 and these are 265/35/18.

 

I'm working on uploading a video but V8 supercars keeps blocking me on YouTube for copyright infringement. Like anyone seeing their sponsors on my videos is bad somehow, unbelievable.

 

Here's a race chrono overlay for now.

Great Sau app won't let me even do that.

 

 

 

 

  • Like 2

So first impression of the AR1 tyres is that they're pretty awesome, especially for the price point. Compared to the A050 they feel to have a little less front end grip and not as confidence inspiring but somehow seem to deliver better rear grip in my experience so far. There was enough grip coming out of the slow corners to make me think twice about wanting or thinking that i need a mechanical lsd. The tyres did seem to go a bit greasy after 5 or 6 laps but would then come good again after a slight cool down. They also seem to work very well even when cold.

Lets see if this direct video upload works... No go with that, stuff the video.

 

With the new found speed, a new issue has emerged. I think i'm at the limit of the standard brake setup. I don't have any issues with getting the car stopped, they do the job well there but the problem has been that pads where only lasting 2 track days until today. I went through a brand new set of front pads in 1 day. i had to cut the last session short as i was on the indicators. 

 

I have wanted to upgrade the brakes for a while, my dillema is what to upgrade it with. There is obviously the evo brembo upgrade which would be nice or the attk/ksport style upgrade. My car is a non abs model and i believe there isn't a direct fit bm50 or bm57. i couldn't be bothered with having to mod hard lines. I know the evo brembo requires a bigger master, does anyone know if the attkd/ksport 6/8 pots need upgrade master or will they work with a bm44.

  • Like 1
12 hours ago, admS15 said:

does anyone know if the attkd/ksport 6/8 pots need upgrade master or will they work with a bm44

We have the ATTKD 8 pot 350mm (or is it 355?) front brakes on a stock master cylinder, on a series 2 R33 GTST (with ABS) track car & they work fine . Rear brakes are stock. No idea how that relates to a series 1 though.

We bought the "race pads" from Just Jap with the brake kit, and got about 12 months out of them. Replaced pads recently with some Project Mu but can't remember the model.

We have the ATTKD 8 pot 350mm (or is it 355?) front brakes on a stock master cylinder, on a series 2 R33 GTST (with ABS) track car & they work fine . Rear brakes are stock. No idea how that relates to a series 1 though.
We bought the "race pads" from Just Jap with the brake kit, and got about 12 months out of them. Replaced pads recently with some Project Mu but can't remember the model.
Thanks for the response and info Geedog. My car is a 96 series 2, just non abs.

That sounds positive, how does the pedal feel and is your abs bmc a bm44?

Its getting a bit ridiculous when pads wont last a full track day. They did 45 laps and where fubarred. Ive thought about trying different pads but im thinking its going to be a pointless and money wasting exercise.

I wonder if anyones tried the evo brembo with stock bmc? I like the idea of that upgrade due to the many and reasonably priced options for rotors and pads.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...