Jump to content
SAU Community

Recommended Posts

if it really bothers you, just upgrade the rears too :)

OR... run a tiny bit wider rear tyres as theoretically the rears would lock easier

This is my concern, that the ABS will be fighting the rears and i will lose overall performance - i have the fronts on at the moment, just weighing up whether or not to buy rears before i head to the track next

You may want to consider a different master cylinder to match the piston areas so you don't end up with a long pedal.

Pedal feels ok at the moment, may be a different story if i look at larger rears as well

This is my concern, that the ABS will be fighting the rears and i will lose overall performance - i have the fronts on at the moment, just weighing up whether or not to buy rears before i head to the track next

Pedal feels ok at the moment, may be a different story if i look at larger rears as well

The ABS in the R32 is rubbish anyway - it is slow and generally pretty ineffective. Just be thankful its not all of that and leaking as well. I have found the Brembo setup with the Vspec master cylinder to be a little rear biased in any case so if you are happy with the pedal travel it is probably not far from being ok.

Did you fit a master cylinder stopper?

I've upgrade the fronts on my 32 GTS4 to GT-R fronts, without any noticeable effect on brake bias.

Given that the majority of the braking is done at the front, doing a bit more at the front shouldn't be a problem.

Its part of the reason why AP 6 pots are such a great upgrade for R32s with bigger rotors. Get more pad area, get more rotor so it all dissipates heat miles better than std but uses small pistons to reduce some of the braking torque you are gaining by going to a bigger rotor and better pads. So two steps forward and one step back means you still end up with nice front to rear balance on an R32 with std booster/masters.

If you go to a caliper with bigger pistons, and bigger rotor and higher u pad well you are doing 3 things that are all going to increase your front braking torque and in turn front bias meaning you are going to be locking brakes like a champion. ABS masks a lot...those of us without ABS tend to be a little more "canary in a tunnel" and sensitive to the differences between various setups

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
    • Hey guys,  Way back when (about 15yrs plus), I picked up a beautiful set of Tein 'Super Racing Spec Circuit Master RE' coilovers from Russman. I have legit never fitted them to my car, as it was garaged indefinitely while i bought a house Yada Yada. They look brand new! Anyway its time to pick up where I left off, and have started doing some khanacross and am booked in for a hill climb next month. The car has some hard af Nismo shocks in ATM, which has me wanting to upgrade again, and now I am left wondering if it's worth having these teins rebuilt? I think they where an ok shock back then, but how do they compare to what's on the market now?  Shockworks/mca are 2800+, and I am sure they are great. But if I can have these rebuilt and be better than, say, a set of bc's for around the cost of bc's, I would be happy with the performance v cost trade off.  If they are considered outdated and rubbish these days, so be it, I'll put them on the shelf and be happy to look at the pretty green colour while I save for the SW/MCA option. Grateful for your thoughts on the matter, and suggestions on who could do the rebuild if it's a worthwhile pursuit.  cheers, Rowdy. 
    • I can't speak for the US, but for Canada as I mentioned above, all fuel gases contain ethanol. We have regulations for E5/E10/E15. Each province handles it differently but basically any fuel gases sold must be E10 and slowly increasing to E15 by a certain year. 
×
×
  • Create New...