Jump to content
SAU Community

Recommended Posts

I enjoy your banter Roy. You and the silver bullet need to spend some more quality time together. If you spent a couple of nights outside with her in the cold before a track day, checking your leaks, checking your levels, checking your hose clamps, installing your own fire extinguishers, and generally preping the car then perhaps you wouldn't have as many frequent issues.

Team Last Minute Baby! Since changing to Racepace i cant really complain about the reliability of the car...all things considered it puts up with the abuse pretty well. Thinking about it the only thing he has done to the car has been tune, timing belt and water pump...but all credit to him as the tone done right has meant i have been at least able to enjoy the car, unlike the dark days of when i first moved to Vic and isntalled the Pfc

I remind you, think about how your car will be fairing in another 4 years time, putting up with the love you have shown it since starting track work in 2004. My poor car has a 4 year headstart, i wish i had the money and know how to do major annual overhauls :(

LOL...you just wait until we get to EC...i will beat your 1:49, but then again, you probably will too :( So for the time being the target is your std turbo PI and Sandown times :)

Yeh Winton is one of those tracks. But i have never actually done a lap near the potential of the car because of problems every time i have gone there. Rule of thumb is Dane, Matt and Ray are all in the 1:38s, and to date when i have had the car workign i am normally as quick as them . So provided i have enough fuel in it, i dont catch on fire, and i dont split a cool erhose/pipe...then im really hoping for a 1:37 or better :(

Im not normally far off the times of Ferni and BBGTR so happy if i can get within 2 seconds of them...so yeh 1:37 feels about right :)

Dane, Matt and Ray in the 1:38's?? You sure??

And I'm not sure BBGTR and ferni have done 1:35's either??

I think those times are a little out, if not, I'm slow..:(

And by the way, what happened to me and my time at EC??

I did a 1:47.1 back in Nov 06...

Dane and Matt have done high 1:38s, i think Ray is still in the 1:39s. BBGTR and Ferni are in the 1:38s or 1:37s from memory...but its only a matter of time until they march up into the 1:35-1:36s... the fact that i have doen 1:41s with the problems i have had, leak and miss, and running out of fuel so massive fuel surge...there is no way i cannot be 3 seconds quicker?!?!?!?

Like i said, Winton may be the last track i can get close to you cheaters...though i suspect the more laps you guys get in around there...the quicker you will get. I cant see me ever goind quicker then a 1:36 :(

Dane, Matt and Ray in the 1:38's?? You sure??

And I'm not sure BBGTR and ferni have done 1:35's either??

I think those times are a little out, if not, I'm slow..:spank:

And by the way, what happened to me and my time at EC??

I did a 1:47.1 back in Nov 06...

hehe, I have only done a 1.38 at winton in my current car. My Sti was good for a 1.36 neat.

The 1.38 was with a split intercooler pipe so I'm banking on a 1.36.XX when we get there in July. We'll see :D

Jack, I'll put some cash down on your cracking a 34 this time. :(

SAU Nickname:Simonster

Car Make and Model:Nissan Sil80

Circuit Name:QR Sprint Ct

Lap time:58.7

Modifications

Engine:RB25 HKS3037S

Power:370rwhp

Suspension:HKS Hypermax2 7kg/5kg

Tyres:Dunlop Direzza F215/45/17 R235/45/17

Brakes: Nissan R32 braided lines RB74 pads

Body weight:~1300kg

SAU Nickname: Simonster

Car Make and Model:Nissan Sil80

Circuit Name:QR Clubman

Lap time: 62.3

Yeah I did the 1m35.5 @ Winton on std bottom end with stock turbs. (WRX R6 - 1st July 2006)

Fark, I was at Winton in April on a 'private' track day, best time I manged to do was a 1:35.9...:O

Looks like I need somebody fast in front of me to go faster... :P

Come July I might end up with no championship points... :closedeyes:

Fark, I was at Winton in April on a 'private' track day, best time I manged to do was a 1:35.9...:)

Looks like I need somebody fast in front of me to go faster... :)

Come July I might end up with no championship points... ;)

You going on Sunday Jack? I'm hoping to but I haven't heard from the boss if the car is working again yet. If so we'll see if we can both improve our efforts. I know I'm aiming for 33's at least. The thing is we were there the other week and the track just didn't seem to have the usual amount of grip so it might be hard. (Mind you I only did 2 laps so...) Apparently it was resurfaced before the recent V8 round.

Im sure Chris will be doing that time in the practice session next time at Calder.... :cheers:

The time to beat is 1:05.5, Matt is the man to beat....

Yeah shouldn't be a problem. I've actually only ever had 2 hot laps at Calder. But when you have stock power it's the tracks with corners that you can make up time on. So Calder has typically been my worst track. But now with a little bit of power...

Oh, i see. So when i say i have never had a good run anywhere...its all smoke and mirrors. You say you have never had a good run and im meant to believe you. Your only as good as your worst excuse...and yours suck. No imganation at all :D

LOL...stock power. Life must be tough with a strong 260rwkws power band :cheers:

You going on Sunday Jack? I'm hoping to but I haven't heard from the boss if the car is working again yet. If so we'll see if we can both improve our efforts. I know I'm aiming for 33's at least. The thing is we were there the other week and the track just didn't seem to have the usual amount of grip so it might be hard. (Mind you I only did 2 laps so...) Apparently it was resurfaced before the recent V8 round.

Nah can't make it this sunday, have other commitments...

I tell ya what its killing me, its been 2 months since my last track day, and another 5 weeks till the next... :D

  • 2 weeks later...

SAU Nickname: johngts-t

Car Make and Model: skyline r32 gts-t

Circuit Name: Baskerville

Circuit Name: Symmons Plains

Lap time: 62.7 B

Lap time: 65.6 SP

Modifications

Engine: pod filter, reset ecu, fmic, 3'' exhuast

Power: bit more than standard

Suspension: lowered springs, front/rear upper camber arms, caster rods, strut bar

Tyres: RE55

Brakes: bendix ultimate

Body weight: about 50-100kg under standard

JBR

myspaceJBR

Edited by johnGTS-t

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...