Jump to content
SAU Community

Recommended Posts

I'll be nice and let you know a small part of where you went wrong in your post.

We don't even know what car you are talking about or what engine is in it. That's your first error...

There are so many variables that come into play so you might want to do some searching first and come up with a specific question if you really cant find any info, but try first =)

There is no way for anyone to answer your OP.

Link to comment
https://www.sau.com.au/forums/topic/463211-what-boost/#findComment-7688928
Share on other sites

For example 800cc injectors implies you have a massive turbo. So what kind of turbo do you have? Have you got an aftermarket ecu? Does your car go? What boost are you running now? Have you got a forged and balanced RB30?

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/463211-what-boost/#findComment-7688948
Share on other sites

Big dose pipe

OK time to be serious, you can't really say how much boost can I run on stock internals.

I personally put about 25psi into my motor but I run a turbo that needs that much boost to deliver the outcome I need.

If I ran a larger turbo and put the same amount of boost into my stock motor it would end up in a pile of scrap metal.

Link to comment
https://www.sau.com.au/forums/topic/463211-what-boost/#findComment-7693214
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...