Jump to content
SAU Community

GOT SUM's RB34


Recommended Posts

Hey guys and gals! I'm Gideon, pretty new to the forum. Picked up my 33 almost 2 months ago now and absolutely love it! Thought I better start a build thread before shit starts getting hectic :D

Picked it up for $6500 with a couple months rego, 132,000kms, I'm the 3rd owner in aus, few basic mods (FMIC, pod, exhaust).

The night I picked her up :)

IMG_20160419_0642_zpsywvd6gxc.jpg

IMG_20160419_38264_zpsiqabkv88.jpg

Gave her a bit of a clean and took a couple pics with a half decent camera!

IMG_20160419_16554_zps6z2fjoha.jpg

IMG_20160419_11867_zpssz5kche5.jpg

Edited by PranK
Changing title as requested
  • Like 1
Link to comment
Share on other sites

First week I had her I picked up a second hand set of pedders coilovers for $550!

IMG_20160419_43802_zpsfbhhjaaz.jpg

I fitted them up along with some adjustable cambers arms all round... This was basically the end result. Got guards rolled, 245 rear tyres and wheel alignment and another 10mm dropped in the rear.

IMG_20160419_12675_zpsnvtwh7hb.jpg

Went out and took a few more pics with new stance :D

Gidz%20car%20night%202%20of%203-XL_zpsfv

Gidz%20car%20night%203%20of%203-XL_zpsfa

Gidz%20car%20night%201%20of%203-XL_zpsnf

Gidz%20car%20sunrise%203%20of%207-XL_zps

Gidz%20car%20sunrise%207%20of%207-XL_zps

Gidz%20car%20sunrise%204%20of%207-XL_zps

Me and a mate after the drags, he unfortunately wrote it off in the rain 2 hours later....

Story%20bridge%201%20of%201-XL_zpsrqi3ie

Drags%203%20of%2061_zpsr3nio5va.jpg

Drags%206%20of%206-XL_zpspvbsaclg.jpg

Edited by klutched
  • Like 1
Link to comment
Share on other sites

Next mod was a Greddy Profec EBC! Installed her in a stealthy spot (boost gauge was mounted here by previous owner :S). Wound the boost up to 9-10pound (was hitting R&R with anymore) and was a heap better!

IMG_20160419_35449_zpswoeeuof2.jpg

IMG_20160419_57568_zpspetxtqk2.jpg

Then Picked up some Highflowed 550cc Injectors (Sold to me as Nismo 740s........). Still ok for what I wanted but not the point. Got them cleaned, rebuilt and flow tested!

IMG_20160419_362_zpsoidacnmv.jpg

Rear Hicas joints were fkd so thought I might as well just totally eliminate the Hicas system from the rear end and bought these. Still need to get around to putting them in when I can be bothered...

IMG_20160419_13184_zps9jhm4kw3.jpg

Was looking for a split dump for a while and then this came up for $100 so had to jump on it! Installed that and noticed a bit more low-mid range torque.

IMG_20160419_31209_zpsiaaoi0ra.jpg

Ordered these off ebay and got the trim colour matched! Turned out sweeeet!

IMG_20160419_52692_zpsyjqhipge.jpg

IMG_20160419_3424_zps40k2zciq.jpg

  • Like 1
Link to comment
Share on other sites

Then this is where the good stuff started :D Picked up this bad boy for $1000 with lines and dump pipe! GT3076R EWG .82 rear....

IMG_20160419_17686_zpsqpjtqlhi.jpg

IMG_20160419_22252_zpsy0mzdp66.jpg

IMG_20160419_27279_zpsobwx7icp.jpg

Gave her a much needed service and threw the green shiz I got with the car when I bought it on! Doesn't look too bad...

IMG_20160419_44649_zpszb2ulo4b.jpg

IMG_20160419_48740_zpsp5wzbiwy.jpg

Couldn't resist doing this....

IMG_20160419_54665_zpspbzv4yls.jpg

That's all for now, but I have a CRG Highmount coming in the next few weeks, picking up a Turbosmart Hypergate 45 Thursday, ordering fuel pump and z32 AFM Plug next week then should be almost ready to go into the shop for a nistune and dyno tune!

Link to comment
Share on other sites

Cheers Sinista! Really happy with it, can't wait to get the turbo on and tuned!

Couple pics of me and my mates 33... Heading out for a Mt Mee run!

IMG_20160419_21279_zpssufqzeee.jpg

IMG_20160419_31291_zpsv2tumfej.jpg

When he wrapped it around a pole after the drags.... Lucky he is alive. You can only see the clutch pedal..

IMG_20160419_20884_zpsgfhzj9lv.jpg

IMG_20160419_29639_zps2uk9oabz.jpg

IMG_20160419_40465_zpsdvngtgpt.jpg

Link to comment
Share on other sites

Our drag, I couldn't get the bloody thing off the line (brand new tyres on 40psi didn't help).. Can hear me slip the clutch to get her going. 2.5 0-60ft time, end up running a 14.96, he ran 14.93...............

Link to comment
Share on other sites

This is my mates old car. Turned a few spanners on her before. The BOV used to be blocked off with a JDM Asahi beer can cut to fit.

She's looking good. Hope you enjoy working on her.

Link to comment
Share on other sites

  • 2 weeks later...

Yeah mate still have the GV, dailying that around now haha!

Haha dam thats sweet, I've only blocked it off with a coke can :(

Little update, mani should be here this week, got myself some YJ's and popped em in. Did a comp test while i was in there too. Bit sketchy but all above board. Tested 170-170-170-155-160-155

IMG_20160511_41498_zpspjr7b96s.jpg

Link to comment
Share on other sites

awwwwwwwwwwwwww.... why did you get YJ?

They're ok as stock replacements, but once you start feeding boost and more dwell into the coils you end up with issues.

Only paid $150 for em ;) Guy I bought em off was running 300rwkw at 18.5psi so we will see how they go. If they can't keep up then I'll just sell em and get 2 more splitfires to complete my set.....

Still waiting on my mani from CRG... Almost been a month now, they have said it will be out their door on Tuesday latest. Then gotta throw mani and turbo on and customize my dump to suit new gate then send them off the be ceramic coated :)

Been talking with my tuner and decided to f**k the AFM off and go a HPX MAF with the Nistune, that way I'll be able to run a 4" intake as well. Need to find someone cheap to fab that up and also a new crossover pipe so it doesn't obstruct that high mount :D Tuner quoted me about $350-400 to do the 4" intake and weld the MAF bung on, need to get a price on the crossover pipe still.

I've also sold my 550cc side feeds and going straight up 1000cc Bosch EV14s with a Raceworks Billet Rail and Tomei Reg. Anyone know where to get some cheap plugs for the injectors?

Link to comment
Share on other sites

nice man!

ever though about Plazmaman intercooler piping kit? (I can do better prices than directly with Plaz)

https://plazmaman.com/shop_itemdetail.php?itemid=153&cate=73

I run the same kit on my car, however no BOV at all.

In terms of plugs, try these guys:

https://www.efihardware.com/products/c304/Injector-Harness-Adapters

or eBay US

Link to comment
Share on other sites

Yeah I have but I'm not getting a new piping kit when I've already got one just need the crossover done. I won't be running a BOV either but tuner said it might cause stalling issue which was another reason for going the HPX MAF.

Yeah looks like I can get em cheaper locally. $45 for a set of 6.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been looking at some setting on the alarms for the Q60 and what buttons do and so and also been looking for details on the alarm in my V37 which is a standard issue with the car. settings like window roll up and a few others seem to not work at all. i cant seem to find exact info on V37 alarms so Q60 is all i can really go off i have not tried 400Z alarm settings or info yet so that will be next. any one got like a sheet of info on the alarm system in the V37 as all my documents are in japanese but i thought the system would basically be like standard through similar models? 
    • I had a fuel smell coming from the drivers rear and pulled the tank out to inspect where it was coming from, turns out the breather hose from the tank to the filler neck was perished. I’m going to Japan next week and I’ll grab it while I’m there  pulled the oil tank apart and started cleaning this crap out of it, some brake cleaner and rags got it looking new again 
    • Hmm. Was quite a few years ago now. I think I bought from a crowd in the US called CDT Audio. The speaker is the HD-6. The HD-6CF would have been the better option (based on T-S parameters), but they were discontinued in 4 ohm at that point in time. The HD-6 is a better driver in almost every other way (than the CF) - just not as good in IB. They still do the HD-6. They might even have a more suitable (for IB) option here.https://www.cdtaudio.com/cdtnew22/products/components/woofers/midwoofers/midwoofers.htm But, here's the rub. I was working in the US a lot back then, so I got them delivered to my US office and then just brought them back to OZ myself. I don't know if they will ship to OZ, and it probably wouldn't be great cost-wise anyway. As to results. They're driven direct off the rear channels of my headunit, because the headunit can be setup to run the rears as subs. So, not a lot of power being fed there. Nevertheless, there's no shortage of volume - the sub levels don't need or want to be boosted at all. The bass is definitely not what you would call "tight". It is definitely a bit delayed compared to a proper sub. But, with the great front soundstage and really good 6.5" woofers in the front doors, I'm getting most of the bass detail from the front and the rear is really only to extend the bottom end a bit. Works for what I'm doing. I mean - until recently you couldn't really hold a conversation in my car due to the fuel pump, and for many years I had tyres so noisy (Kumho KU36 at <50 tread depth) that I had to drive with earplugs anyway!
    • curious to know what drivers you chose and the results? quik mafs, says two 6.5s should roughly equate somewhere between a single 8" or 10" driver. i agree that IB is definitely the way to go in most cars imo.
    • S13 and R32 rear suspension geometry is horrible once you lower it (which everyone does). The camber & toe out ramp is very aggressive, hence it's common for the S13 boys/girls to use a S14 or S15 subframe as the geometry is light years ahead. I'm sure the same can be done on R32s, but I don't know anyone that has done that.
×
×
  • Create New...